Це відео не доступне.
Перепрошуємо.
Mortice Sled for Router Table
Вставка
- Опубліковано 7 сер 2024
- Make this simple sled to cut identical mortices on a router table.
00:00 How to use the sled to cut mortice
03:25 How to make the sled
07:17 A router table stand made with the sled
How to cut precise width runners on table saw: • Micro Adjustment of Ta...
Cut tenons on table saw, using a shop made jig: • Tenon on Table saw - t...
Installation of Wixey DRO on router table: • Improve Accuracy of Wi...
Router table: • Router Table: SawStop...
My Channel: / @steven.woodward
Another incredibly informative video! There are not a lot if any people that address these issues and explain in such detail the material you discuss. Thanks so much!
You know that you just open a new world of router table jigs 👍 Thank you for sharing.
I love this man! i just need to find time to make it.
Great design and use. I made one very similar about 15 years ago, but I made a slot in the sled for stops so they were in the sled, using the table T-track. I used T-bolts to reposition the fence, on T-tracks, and had it mounted with long screws and handles behind so that I could move it in a parallel fashion by turning the knobs equally. I never did figure out how to do that efficiently. I rabbeted the slide(s) to fit in the T-track so that it wouldn't accidentally raise up in the back. My slides were only about 2-inches long on each side of the sled, not the whole width. I eventually added adjustable hold down clamps to the fence. Mine won't handle as large of material as this one, and I can't do curved pieces. I am definitely going to incorporate your ideas into my next version.
Cutting mortises so that gravity helps you with the shavings rather than hindering is HUGE. THANKS for posting this video!!
A very useful jig. Awesome job
Well, this is a very welcome video. Impressive jig.
It was easy to make, and I am finding it very helpful. I searched the internet and could not find anything similar. Surprising that has not been done before.