Setting up and using your Axys Rotary Valhalla

Поділитися
Вставка
  • Опубліковано 26 січ 2025

КОМЕНТАРІ • 39

  • @KikiArroyo85
    @KikiArroyo85 Рік тому +2

    Ty for this tutorial. I'm used to Bishop machines and I wanted to see how the Valhalla pen was but theres very little tutorials on here for cosmetic tattooing. You went over everything. I appreciate you and your wisdom.

  • @jiyoungjungpicha9342
    @jiyoungjungpicha9342 Рік тому +1

    Can this machine be used for SMP?

  • @cristinavelescu3972
    @cristinavelescu3972 3 роки тому +4

    Very very helpful. Honestly I watched so many videos but you nailed it !!! Thank you 🙏🏻

  • @user-yy8sw3zn7n
    @user-yy8sw3zn7n Рік тому +1

    And what speed do you run when you shade brows?

    • @ThePMUCircle
      @ThePMUCircle  Рік тому

      I like it at around 7 volts for shading

  • @geinyrosendi8010
    @geinyrosendi8010 3 роки тому +1

    Thank you for the video , can you share your experience wish needle is good for this machine. Thank you

    • @ThePMUCircle
      @ThePMUCircle  3 роки тому

      My favourites are micropmu acupuncture, HQ and defenderr :)

  • @JoSmith-kn9st
    @JoSmith-kn9st 3 роки тому +1

    About to try Axys Valhalla rotary pen - how do you sterilize the machine without the paint coming off?

    • @teamsterjeffrey
      @teamsterjeffrey 3 роки тому

      Make sure peroxide isn’t in the solution

    • @ThePMUCircle
      @ThePMUCircle  Рік тому

      We dont autoclave here, everything is fully wrapped and all cartridges have a back flow membrane x

  • @raylong2215
    @raylong2215 3 роки тому +1

    Hi I am going to purchase the valkyr but how do I know which rca cables are compatible? I am sort of confused. First rotary machine!

    • @ThePMUCircle
      @ThePMUCircle  3 роки тому

      Get your rca from the distributor - some of the cheap ones dont last 5 minutes x

    • @raylong2215
      @raylong2215 3 роки тому

      @@ThePMUCircle thank you. I’ve been given advice like “this one is really cheap and works fine.”
      But I am getting critical atom x and the critical rca. I feel like they must’ve been manufactured to work well together you know.

  • @lovergirlliz
    @lovergirlliz 2 роки тому +1

    What size/brand of cartridges do you use?

    • @ThePMUCircle
      @ThePMUCircle  Рік тому

      I love the HQ needles, micropmu acupunctures and vertix 🫶 i mainly use a 1rl, 3rl and 5rs

  • @BlueCross76111
    @BlueCross76111 3 роки тому +1

    Thank you for this video. What stroke do you typically use for hair strokes? Powder/shade detail? And what speed for both when using the valhalla? Thank you in advance. :)

    • @ThePMUCircle
      @ThePMUCircle  3 роки тому

      No problem. I tend to shade around 7-8 volts on the critical atom and strokes around 9-10. Cam depends on skin type but generally 2.5 for shading, 3.2 for strokes x

  • @danielleelmoghazy5462
    @danielleelmoghazy5462 2 роки тому +1

    Can you do a video of how long your needle hang is for pmu? Great video!

    • @ThePMUCircle
      @ThePMUCircle  Рік тому

      Here you go Top Tips - How far out should i have my needle? Permanent Makeup tutorial
      ua-cam.com/video/F7KeOyrNHGw/v-deo.html

  • @auroraaurora4169
    @auroraaurora4169 3 роки тому +1

    May i ask which needle brands you like to use for pmu? 🙏

    • @ThePMUCircle
      @ThePMUCircle  3 роки тому

      My faves are micropmu acupuncture, HQ and defenderr :)

  • @user-yy8sw3zn7n
    @user-yy8sw3zn7n Рік тому

    Is your needle supposed to go in and out? Cause mine is not

    • @ThePMUCircle
      @ThePMUCircle  Рік тому

      Yes it is - have you loosened the grip?

  • @marcelasanchezpmu8378
    @marcelasanchezpmu8378 3 роки тому +1

    Is it autoclave safe?

  • @kimnguyen2665
    @kimnguyen2665 3 роки тому

    Hi I purchased this machine too and having a hard time looking for the right needle catridges. I purchased the standard catridges and it said long taper but the needle doesn’t come out. What is the matching catridges for this machine? Thank you

    • @ThePMUCircle
      @ThePMUCircle  3 роки тому

      Hey Kim - they take any universal cartridge :) you may need to twist your grip to make the needle length longer

    • @kimnguyen2665
      @kimnguyen2665 3 роки тому

      @@ThePMUCircle yay!!!! Thanks alot. You’re awesome.

  • @Md-pp8sk
    @Md-pp8sk 2 роки тому

    So where is the plus

  • @loraleilaymon3963
    @loraleilaymon3963 3 роки тому +2

    I placed an order for this machine an hour or so ago and im all giddy after watching this video

  • @engravercarlb
    @engravercarlb 3 роки тому

    moving the ring doesnt control the hit as much as how long the stroke is

    • @ThePMUCircle
      @ThePMUCircle  3 роки тому

      Yes the dial is controlling the stroke - but as we increase the stroke the hit will increase also 🤷🏻‍♀️

  • @geinyrosendi8010
    @geinyrosendi8010 3 роки тому +1

    Thank you 🙏🏼