It doesn't work in every game, but you can try it by going into the game configuration > Advanced and setting the Vblank frequency to double the framerate you're looking to achieve. For example, setting it to 240Hz will allow a framerate of up to 120FPS.
You'll need to grab the emulator CEMU and also source the game. To get a higher framerate and resolution, you need to use the addon feature for the game in the CEMU emulator. I might make a tutorial for each emulator at some point if there's interest in it.
RE: The SSD I think there is a NAND lottery on it and it's usually cheap QLC. You can use phison and SMI tools to check the NAND type - let me know if you need links to the tools. (I think the P3 used the SMI one)
Hello, what has been the experience so far with Beelink? I have seen negative comments that it lasts up to 6 months or a year and it breaks down. Thank you in advance for your response.
@@christianguillenchica9561 That doesn't sound good. I haven't reached that 6 month mark but will now start researching about that. So far it has been good.
@@Robtech I really dig the "S" but would have liked the option to adjust the memory speed. Theres one single video on UA-cam that I have found where a guy tested this and bumping the memory speed to 5600 Mt gave about a 10-15% performance bump on the 680m. Been wanting to get my hands on one of the older 690 non s to play with...
hello! quick question, Which is better Ser 6-P or Ser7 7840HS? I can't really decide between the two. Watched both of your videos, I liked that you can still mount Ser7 with a metal casing but Ser 6-P is a newer release.
Have you tried running more graphic-intensive shaders like CRT Royale and CRT Royal Kazumi (Sp?) on the more retro, pixel-graphic consoles (NES, SNES). Trying to find a mini PC with the graphcis power to do such a thing at 4k so I can make it look like a CRT.
I don't have OCD but my Apollo P40 Projector has an upside down HDMI port (unless you ceiling mount it, then the unit is upside down but the port is right side up lol). This sucks because I need a low profile HDMI to fit it on my shelf up against the wall. 90 degree adaptor makes the wire go straight up over the top of the unit. I had to buy a 180 degree adaptor so the wire bends down behind the unit
Interesting discovery on my 690S - I have been able to set the memory to 5200 MT (I have Crucial 5600MT in the box). When setting it to 5200MT the first time, the system booted, Windows Task Manager registered the memory running at 5200 MT but then the system hung. When I rebooted it, the GPU driver failed to load, so I rebooted again and, for no reason whatsoever, I went back into the bios and set the memory to 5600 MT....system started fine, graphic drivers ran as they should, and the Memory still shows it running at 5200 MT! need to run some benchmarks to see what results are...just takes forever on first boot after messing with mem settings
Yes, seems to improve 1% lows, but overall 1080P low textured don't need a lot of Vram. Increasing it would help at higher resolutions, but the framerate isn't there to make it worthwhile
I just bought a SER6-P on Amazon, but compared to my old MSI DP20 the mini-fan is very noisy. I have put it in bios in silent mode, with no apparent differences, and I have tried to adjust the RPM of the fan in bios manually PWM but it doesn't work either, any manual to be able to force a rpm? Or disconnect FAN and mod install and external 12cm or similar??? I have tried various software for windows to try to control the fan, but none of the software is able to detect it. If I can't adjust it to a lower sound I will return it. :/
I picked up this Mini PC 2 weeks ago to use as an emulation machine. Honestly, it's been hit or miss with certain emulators (especially Xbox). I am an older guy so I put 60% on me , but I was kind of expecting install emulator and the PC will handle everything else. The advice I've been getting is take the time to set up Batocera on a portable SSD and go from there, just wondering what other owners of this PC think?
Interesting review, and I've been curious. Rob, I know that the Beelink specs say that they're PCIe gen 4, but I wonder how many lanes each has available, given that you're seeing worse performance from the same drive used in that earlier unit. I agree that it's a shame to see a regression to all-plastic (or close enough, as I assume the grills are metal), as I like that my 5600H has a metal case. Still, having a secondary fan that actually has holes for outside air pull is nice.
*sigh* Why, why, why not regular OS? I would do a clean installation and hope the OS was activated fine. The USB ports was a weird thing. Like...wtf? Anyway, good review as always, thanks for sharing.
Hello, what has been the experience so far with Beelink? I have seen negative comments that it lasts up to 6 months or a year and it breaks down. Thank you in advance for your response.
I don't understand what the appeal is with these Mini cyber security risks, price to Performance you can get a regular desktop from a reputable brand. I know some people say because they're mini they're portable but you would still need to carry a screen and a keyboard. the fact that several of these lesser PC makers have been shown to ship PCS with malware makes it a hard pass.
![Beelink's HIGHLY TUNED Mini PC 😱 [BEELINK SER6 w/ Ryzen 6900HX REVIEW]](http://i.ytimg.com/vi/v_BWyyPmJts/mqdefault.jpg)
Apologies for the audio issues on this one.
Also in the topic of emlation, what do you to emulate Zelda BOTW? Where can I download it?
It doesn't work in every game, but you can try it by going into the game configuration > Advanced and setting the Vblank frequency to double the framerate you're looking to achieve. For example, setting it to 240Hz will allow a framerate of up to 120FPS.
You'll need to grab the emulator CEMU and also source the game. To get a higher framerate and resolution, you need to use the addon feature for the game in the CEMU emulator. I might make a tutorial for each emulator at some point if there's interest in it.
RE: The SSD I think there is a NAND lottery on it and it's usually cheap QLC. You can use phison and SMI tools to check the NAND type - let me know if you need links to the tools. (I think the P3 used the SMI one)
Hey. You're doing a great job. No complaints here.
Great review as always dude, cheers!
Beelink really makes these little machines to stand out.
Just got one. Thanks for the review
Hello, what has been the experience so far with Beelink? I have seen negative comments that it lasts up to 6 months or a year and it breaks down. Thank you in advance for your response.
@@christianguillenchica9561 That doesn't sound good. I haven't reached that 6 month mark but will now start researching about that. So far it has been good.
The Minisforum UM690 (non-S) was one that allowed memory overclocking that worked. The 690S "lets" you set the memory higher but it does nothing.
Yeah, that's the one. Didn't review the S.
@@Robtech I really dig the "S" but would have liked the option to adjust the memory speed. Theres one single video on UA-cam that I have found where a guy tested this and bumping the memory speed to 5600 Mt gave about a 10-15% performance bump on the 680m. Been wanting to get my hands on one of the older 690 non s to play with...
Weird to me that they brought back the 6900HX (originally in GTR6). It def ran hot/noisy in that old model.
Thanks for this video. I am purchasing this right now.
hello! quick question, Which is better Ser 6-P or Ser7 7840HS? I can't really decide between the two. Watched both of your videos, I liked that you can still mount Ser7 with a metal casing but Ser 6-P is a newer release.
SER7 has a newer faster generation processor, better cooling and lower fan noise.
Have you tried running more graphic-intensive shaders like CRT Royale and CRT Royal Kazumi (Sp?) on the more retro, pixel-graphic consoles (NES, SNES). Trying to find a mini PC with the graphcis power to do such a thing at 4k so I can make it look like a CRT.
I don't have OCD but my Apollo P40 Projector has an upside down HDMI port (unless you ceiling mount it, then the unit is upside down but the port is right side up lol). This sucks because I need a low profile HDMI to fit it on my shelf up against the wall. 90 degree adaptor makes the wire go straight up over the top of the unit. I had to buy a 180 degree adaptor so the wire bends down behind the unit
Any chance of a review on the Minisforum um690 Pro? Wonder if they left the OC options active...
I notice USB port orientation of many mini PC brands tend to be upside down. Isn't that easier to collect dusts?
You shrug so much sometimes it looks like you’re stuck in the middle of a shrug for several minutes, ready to shrug again faster than ever.
🤷♂️
@@Robtech keep on shrugging!
Does it have good aroma coming from air vents when it is powered on?
lol
Nice review
Ser6 or ser5 max?
Interesting discovery on my 690S - I have been able to set the memory to 5200 MT (I have Crucial 5600MT in the box). When setting it to 5200MT the first time, the system booted, Windows Task Manager registered the memory running at 5200 MT but then the system hung. When I rebooted it, the GPU driver failed to load, so I rebooted again and, for no reason whatsoever, I went back into the bios and set the memory to 5600 MT....system started fine, graphic drivers ran as they should, and the Memory still shows it running at 5200 MT! need to run some benchmarks to see what results are...just takes forever on first boot after messing with mem settings
What about the voltage? There’s ambiguous information about whether it could be used in 220v, which is my case.
Universal power supplies (100-240v) are used with minis as far as I can remember.
As always any prebuilt you get, wipe it and fresh install from a trusted source
But how
Looks great in an office setting!
My only complaint is that there's no VESA mounting. 😞
Seems to be the trend now.
Did anyone figure out the write speed issue? Was it a fluke or is this an issue? Thanks!
i also would like a follow up
how does it handle Wow War within?
Have you tried allocating more ram to the gpu ? Would be interesting to see if it boosts performance in a meaningful way
Yes, seems to improve 1% lows, but overall 1080P low textured don't need a lot of Vram. Increasing it would help at higher resolutions, but the framerate isn't there to make it worthwhile
A channel dedicated to reviewing mini PCs? Color me subscribed.
Color me appreciative
@@Robtech Please, you're welcome.
I've been watching some of your other videos and I must say, I quite like the humor you're sprinkling around. 😄
Please compare this model with eqr6. Which one is better? Tks.
Already reviewed the EQR6. It runs at a lower power limit and performs more like a 6600H, but is quiet. This one has better performance.
Which port is fot wifi and what's the size or whatever u call it for the hdmi port
I just bought a SER6-P on Amazon, but compared to my old MSI DP20 the mini-fan is very noisy. I have put it in bios in silent mode, with no apparent differences, and I have tried to adjust the RPM of the fan in bios manually PWM but it doesn't work either, any manual to be able to force a rpm? Or disconnect FAN and mod install and external 12cm or similar???
I have tried various software for windows to try to control the fan, but none of the software is able to detect it. If I can't adjust it to a lower sound I will return it. :/
ua-cam.com/video/GuKJMmgqPU8/v-deo.htmlsi=E42mifmT9z7jbl3_&t=868
@@Robtech I'm going to try to do something like this with the Ser6...
SER8 is very quiet. This one isn't unfortunately
What is the p model I was gonna get it en the new 6 right basically v2 with the 6900hx?
How many displays can this one handle? Thanks!
Thanks for mentioning the shallow USB ports. That does bother me a bit for safety reasons.
But you can keep saying SER instead of S-E-R. 😂
😂
IT'S MA'AM
Hey can you make a review on Bmax B8 Pro mini
I picked up this Mini PC 2 weeks ago to use as an emulation machine. Honestly, it's been hit or miss with certain emulators (especially Xbox). I am an older guy so I put 60% on me , but I was kind of expecting install emulator and the PC will handle everything else. The advice I've been getting is take the time to set up Batocera on a portable SSD and go from there, just wondering what other owners of this PC think?
Def use batocera. Xenia on it runs way better than windows. I can play halo on 1440p on batocera but barely run it on windows
Interesting review, and I've been curious. Rob, I know that the Beelink specs say that they're PCIe gen 4, but I wonder how many lanes each has available, given that you're seeing worse performance from the same drive used in that earlier unit. I agree that it's a shame to see a regression to all-plastic (or close enough, as I assume the grills are metal), as I like that my 5600H has a metal case. Still, having a secondary fan that actually has holes for outside air pull is nice.
Coming up as Gen4 x4 for both. Just this drive having really poor write 😓
@@Robtech Thanks Rob. I had assumed they would be, but the performance made me question that assumption.
my monitor has a 90w PD output. Is it sufficient to power this PC via USB4?
You might have to drop the max power draw in the BIOS from 54W to something lower if the mini starts powering off.
*What better miniPC beelink Ser6 max r9 6800hx vs Laptop Lenovo LOQ 15IAX9-01 i5-12450HX ?*
The 6900HX is a better chip.
*sigh* Why, why, why not regular OS? I would do a clean installation and hope the OS was activated fine.
The USB ports was a weird thing. Like...wtf?
Anyway, good review as always, thanks for sharing.
How is it going after all this time of use? (If you used it)
Same as in the review
Is this mini PC capable of running Sea of Thieves?
Beats the minimum requirements no problem. Doesn't match the recommended.
Value for money for gamer, overkill for Office user.
Just bough one, downgraded from big ass tower to Mini pc
Hello, what has been the experience so far with Beelink? I have seen negative comments that it lasts up to 6 months or a year and it breaks down. Thank you in advance for your response.
At 600 $ Minisforum mini PC with arc 730M gpu IS way BETTER THAN THIS it has a rtx 3050 laptop level GPU
@@Horvat04minisforum hn2673 um780 xtx is also better.1 usb 4 port + 1 occulink port 65gbps external gpu possible
What that name device miniPc?
I need miniPc rtx 3050 ?*know laptop level GPU
I don't understand what the appeal is with these Mini cyber security risks, price to Performance you can get a regular desktop from a reputable brand. I know some people say because they're mini they're portable but you would still need to carry a screen and a keyboard. the fact that several of these lesser PC makers have been shown to ship PCS with malware makes it a hard pass.