If you have one hot fire in the barrel after you open it all that paint will disappear, just saying way easier and cheaper than stripping the entire thing
My dad told me stories of how the would repurpose agent orange barrels in Vietnam. Showers, mix drinks etc. I suggest you know what was in the barrel beforehand. He's been gone now for almost 7 years due to complications from agent orange.
Someone never grew up on a farm and had the outside "burn barrel" that lasted 10+ years of burning whatever random stuff that needed burning. It'll last.
I feel like there should be a warning at the beginning about not using a barrel that was used to store a flammable liquid. The fumes/vapors last a lot longer than you would think. Cutoff wheel + flammable gas = explosion. Some people aren't all that bright...
@@JS-824 We don't know what he did prior to the video and that is not really relevant. The point is, if you're going to make an instructional video, you should address any safety concerns up front. Anyone who has worked in any kind of industrial environment knows this.
it you weld that slow you are using to big of welding rod and the amperage is to high. When welding sounds good it sounds like frying bacon. stoping in the middle of a puddle opens the weld to impurities and a weak weld.
@@jesusguerra9095 Glad to help man. button those sleeves also so sparks don't get to your forearms. E6013 electrodes 3/32" -- at 40 - 50 amps, always chip the slag when restarting the puddle.
Scrap metal $60 maybe more, welding supplies about $20 time about 2 to 3 hours maybe more, Houston tx done that when I was younger as a school project at the time sounded very good not anymore
Be cause the ones you typically buy are bolted together and come in a box from China or some other slave labor country. And you still have to assemble it yourself.
Stevens obviously you don’t know anything about Texas, there’s several stores that sell barrel pits made by local welders, and there’s a lot of welding shops that make those made from scrap metal and sells them for $50
@@luich2275 I live in Texas, the barrel pits you get at the big box stores like Lowes, home depot, academy, and Walmart are all made overseas and come in a box that you have to assemble yourself. Yes there are places that sell barrel pits from local craftsman but those are usually in small rural areas that doesn't have a big box store.
I like the grill, not to sure about the method and definitely not ok about welding around snoopy. Next time give the mask to snoopy and try not to use one yourself and see how that goes.
Reading the comment about worries of previous fluids in the barbecue pit...LOL. i'd be more concerned about that American meat you eat full of chemicals... and the drinks too!
Da próxima vez, o amigo não precisa mostrar TODO O PROCESSO DA SOLDA! 👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻 É muito desagradável a luz emitida por ela. 👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻
This video is cool. About your welding, you shouldn't be stitch welding (intermittent arcing with spots) this has been proven to be weak. This will collapse because the welds are not strong. You should always run a bead at a 10 - 15 degree angle either pushing or pulling constantly. Not stitch welding like this. Hope it helps you in the future.
I'm 51 years old and I remember my dad making these when I was like 6
Holy freaking farmer's weld..... But hell it gets the job done...
Hahahahha
Damn I got irritated with all those tack welds. What happened to beads.
You ever stick weld on metal that thin, you can get a bead going
great job! you might want to shoot Hi Temp primer 1st next time. very good instructional video.
Excelente trabajo, andaba buscando un modelo para construir una, me quedo con esta para tenerla como modelo, buen trabajo
If you have one hot fire in the barrel after you open it all that paint will disappear, just saying way easier and cheaper than stripping the entire thing
I was thinkin the same thing. Waste of time.
Craftsmanship at its best
Great Job!! Greeting from Argentina!!
Buen trabajo 👍👌un consejo no vaya a quemar a su perro 🐕
They been doing these in Mexico since bk in the day there amazing grills believe it or not
Be sure to clean inside the barrel with water and then pull out all gas inside, a guy here in Brazil died from a explosion when cutting a barrel
Theres petrochemicals inside the barrel walls no matter what. This cannot he made "safe" by cleaning.
Great job! I like it!
Nice job!! Love it.
My dad told me stories of how the would repurpose agent orange barrels in Vietnam. Showers, mix drinks etc. I suggest you know what was in the barrel beforehand. He's been gone now for almost 7 years due to complications from agent orange.
This grill could use a chimney
Your mom is a chimney
Show us what you got. A smoker has a chimney. A grill is just a grill.
That’s a lot of work for something that’s not going to last long due to thin metal of the barrel !
Someone never grew up on a farm and had the outside "burn barrel" that lasted 10+ years of burning whatever random stuff that needed burning. It'll last.
It'll be fine, especially if coated with oil on the outside and allowed to cook it into a protective shell
@@abingham3747 PC hola
That barrel will outlast 99% of store bought bbq's 😅
Mine is over ten years old. I leave it in the back yard uncovered so……
I feel like there should be a warning at the beginning about not using a barrel that was used to store a flammable liquid. The fumes/vapors last a lot longer than you would think. Cutoff wheel + flammable gas = explosion. Some people aren't all that bright...
No doubt and also about using paint stripper indoors
Should have filled the barrel with water to de-gas it first.
The guy just wants desperately to get famous on UA-cam. His welding is terrible.
How do we know he didn’t do this step before the videos starts.
@@JS-824 We don't know what he did prior to the video and that is not really relevant. The point is, if you're going to make an instructional video, you should address any safety concerns up front. Anyone who has worked in any kind of industrial environment knows this.
A farmer did this one town over and we heard the explosion… 6km away. Cowboy….. he lived btw.
Is the dog blind now or
Like a Boss! 1 video simple 1.3M views💪🏽💪🏽💪🏽💪🏽
Good luck cleaning it after any type of use . Also no bottom airflow adjustment, I wouldn’t use it if you gave it to me. Go with a Weber
très beau travail :))
Nicely done
hey !! ever seen pulse stik weldin...u have now..!!
Nice job but be careful with the dog ❤❤❤
Que hàn KOVI hân hạnh tài trợ video này 😍
Why so many tacks? Just tun the bead
Exact same thing I said. It'll be much more durable
because it will penetrate through
@@tavonmccall1155 because it will penetrate through
Ничего нет страшней горячего копчения, это аппарат по производству канцерогенов
Genius 👏🏼 simple yet amazing.
I'm concerned about the chemicals that were previously stored inside the drum ....But that's just me...I have a manufacturing past.
Your supposed to let is smoke for like 3 hours so it gets rid of the chemicals
That welding loll
That’s a great grill. It’s not a smoker.
If you put an air nozzle with the trigger wired open into the bung, you don’t have to worry about flammable liquids or residuals igniting.
Beautyfull can you make one for me in Holland haha
it you weld that slow you are using to big of welding rod and the amperage is to high. When welding sounds good it sounds like frying bacon. stoping in the middle of a puddle opens the weld to impurities and a weak weld.
Ok master "welder "🤣
@@jesusguerra9095 Glad to help man. button those sleeves also so sparks don't get to your forearms.
E6013 electrodes 3/32" -- at 40 - 50 amps, always chip the slag when restarting the puddle.
@@dand3975 0pppapq
Good thing this one is not for home use
Nice work
Good job 👏🏼!!!
Hello. Can you pdovide the measurements? Especially for the frame and what holds the grill grate.
Chưa thấy nướng phát nào đâu nhé. Hôm nào cho anh mượn nhé.
It would be better if only 1/4 was removed for the lid, verses 1/2 of the barrel. This is now too top heavy, and the lid is heavier.
Can you use any barrel?, cuz you know some barrels may contain some toxic material
Why weld the hinges??? Doesn't look neat
Perfect 👍
Molto bravo🎉🎉🎉
Very good, awesome
Doesn't anyone know what a bloody smoker is
Anyone else notice the dog go blind at 7:56
yeah wtf keep your animals away when welding
Anyone else’s eyes f..ked up after that sparks lol
Do u paint the inside
Got to be a better way to weld that ….
Que tipo de corrente é essa?
First explain ... You need to clean this barrel before of this. Is very important or you can go to ...😵 No jokes. Care with this barrels.
What if I like a hint of petroleum in my sausages?
prachtige barbecue
Or save yourself 4 weeks of work and just go buy a goddamn $200 smoker
Có bán không a
Have you allready used it?
Great build
Fire
what is the name of the stuff your using to remove the paint way better than burning or grinding it off
I want to know too
acetone is what he used dont touch it tho, stuff will eat your skin off
Removedor de Pintura
Also air in and out shouldn't be on the same side. Quality over quantity details matter. All that work for crap
quedo chingon te escargo uno viejon
nice, I bit to high for me.
These can be toxic. Don't do this, folks!
Gratte !!!
Annoying frigging welding, great grill though
The way this guy welds has me skipping as much as possible
u can put handle at the grill for easy removal it hot..
Что за кислота
Pressure washer be way easier.
Liqurd name plz
nhìn cách phun sơn mà phát chán
what is paint remover name?
For safety I would only use a stainless food grade barrel
Why is they always half ass these things at least make welds look presentable no cleaning buckshot or slag simply unacceptable
Yea nice, but why go to all that trouble when most of the store sells them for less than $80
Why spend $80 when you can build your own out of scrap? If you have the tools and the knowledge to build one then why not?
Scrap metal $60 maybe more, welding supplies about $20 time about 2 to 3 hours maybe more, Houston tx done that when I was younger as a school project at the time sounded very good not anymore
Be cause the ones you typically buy are bolted together and come in a box from China or some other slave labor country. And you still have to assemble it yourself.
Stevens obviously you don’t know anything about Texas, there’s several stores that sell barrel pits made by local welders, and there’s a lot of welding shops that make those made from scrap metal and sells them for $50
@@luich2275 I live in Texas, the barrel pits you get at the big box stores like Lowes, home depot, academy, and Walmart are all made overseas and come in a box that you have to assemble yourself. Yes there are places that sell barrel pits from local craftsman but those are usually in small rural areas that doesn't have a big box store.
What did u paint 🎨 on uk ? Cheers
What kind of weld machine are you using?
arc welder. aka stick welder
My guy great fucking job dammitt it looks good.
Dq le haces la parrilla
You need to learn to weld bro
I like the grill, not to sure about the method and definitely not ok about welding around snoopy. Next time give the mask to snoopy and try not to use one yourself and see how that goes.
Shut the hell up dude lol
? Я правильно понимаю что от температуры металл не поведёт и потери тепла не будет.
Поведет. Ребра жёсткости надо приваривать
Чем ты полеваеш
Reading the comment about worries of previous fluids in the barbecue pit...LOL. i'd be more concerned about that American meat you eat full of chemicals... and the drinks too!
That will last less than a year with regular use
weldsare so bad
👁️👃👁️👍👍
Day-Z lol
Grill is nice. Didn't like the video.
Da próxima vez, o amigo não precisa mostrar TODO O PROCESSO DA SOLDA! 👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻
É muito desagradável a luz emitida por ela.
👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻👎🏻
Buy a new one at Walmart for $50 and save your time with something better
Класс!
Barbacoa ke te vote xapoteee
This video is cool. About your welding, you shouldn't be stitch welding (intermittent arcing with spots) this has been proven to be weak. This will collapse because the welds are not strong.
You should always run a bead at a 10 - 15 degree angle either pushing or pulling constantly. Not stitch welding like this.
Hope it helps you in the future.
Doesn't matter about the welds. These drums don't last for shit. Way too thin. Lots of work put in for a short lived product
If you know how to weld, stitch welding works fine on thin or out of position welds.
Nicely done