05 How To Make a Pirate's Treasure Chest from Oak & Forged Iron Hardware
Вставка
- Опубліковано 23 лип 2024
- Detailed plans are available on my website here.
kingsfinewoodworking.com/prod...
It has an arched lid, with an antique reproduction padlock.
I used golden oak stain and a satin lacquer finish.
Tools:
This is all the components of the router table. These are our links.
All Woodpeckers:
Router table top: amzn.to/40DNVEm
Router lift: amzn.to/3HyOEO9
Router table stand: amzn.to/3JzMfFM
Router table fence: amzn.to/3HVlxWG
Router motor: amzn.to/3X28PtI
On/off switch: amzn.to/3YpYMjl
Thor’s Hammer Woodworking Mallet: kingsfinewoodworking.com/coll...
Grizzly Jointer - amzn.to/3j09TAk
Grizzly Cabinet Table Saw - amzn.to/3wXwzo1
Wood Glue Dispenser - amzn.to/3D94pKz
Silicone Glue Applicator Set - amzn.to/3WQAk9l
Bessey 24" Parallel Clamp - amzn.to/3XOyl6u
Woodpeckers Square 12" - amzn.to/3E2W1gb
Grizzly Bandsaw - amzn.to/3XUUobR
BOSCH 12 Inch Sliding Glide Miter Saw - amzn.to/3j331SU
DEWALT Bar Clamp - amzn.to/3Rgtzgd
Ridgid Handheld Belt Sander - amzn.to/3Js0UD1
Ridgid 5-Inch Random Orbit Sander - amzn.to/3JefhdM
Grizzly Bandsaw - amzn.to/3XUUobR
1/2" Shank Rabbet Router Bit - amzn.to/3jsO3Wk
Grizzly 12" Disc Sander - amzn.to/3wsbjH4
Self centering VIX drill bit - amzn.to/3pB6a9z
Milwaukee Screw Bit Set - amzn.to/3wR5kf7
Dewalt Power Tool Combo Kit with 2 Batteries and Charger - amzn.to/3johJUr
Center Punch Kit - amzn.to/3RpTZfh
Owl Tools Brad Point Wood Drill Bit Set - amzn.to/3WQUvUP
Dewalt Router - amzn.to/3wKby0g
Dewalt 9ft Pocket Tape Measure - amzn.to/3HzzqZf
Materials:
Titebond III Glue - amzn.to/3wvDDIh
36 Grit Resin Cloth Aluminum Oxide Sanding Belt - amzn.to/3kEKH2P
Sandpaper Set 5-Inch - amzn.to/3Wygb7S
CA Glue with Activator Bundle - amzn.to/3YaAuth
Vintage Cabinet Butterfly Hinges - amzn.to/3X8WBPY
Oak Wood Finish - amzn.to/3E2Whf9
As an Amazon Associate I earn from qualifying purchases.
Link to the KFW Community Woodworking group. Share pictures of your work & get help if needed. Join our Community Page. Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools: / kingsfinewoodworkingco...
Help support us through Patreon: / kingsfinewoodworking
Purchase plans on our website: kingsfinewoodworking.com/coll...
Please like and share our videos. Thank You!
We love teaching the world to do woodworking. - Навчання та стиль
Share pictures of your work & get help if needed. Join our King’s Fine Woodworking Community Page.
Woodworkers helping other woodworkers. Share advice, get project ideas. Free tips. Insider information. Get the best deals on lumber & tools.
m.facebook.com/groups/134828903893994
King's Fine Woodworking what angle degree are you cutting the lid slats?
Where is the list of material?
Ah, an old-fashion lever lock. Excellent choice.
I would like to say how much I appreciate your videos.
With so much negativity in life it’s good to watch something as particularly grounded as your woodworking. Nothing toxic just shared insights and experience, well edited and delivered at a comfortable pace (with added family input.)
Take care.
I love how you get your family to help you so much. its a great way to get kids interested in woodworking or any other craft or trade.
starts a lifelong love, and I should know...its how it happened for me.
Great Dad there!
Thank you very much!
Great job easy to follow will be having a go at that after I've gained a bit more experience. lovely finish. Thanks for posting.
Thank you!
Love it! My granddaughter (3 year old) would most definitely be estatic over this exact one! This is at the top of her Christmas list, a treasure chest filled with gold coins and jewelry. Since, I've been looking around for one, one that is unfinished (due to cost and paint myself). If only I were able to find one just like this. Would be perfect!
Just a tip: I have done some odd shaped glue joints in which I've had great luck with using ratchet straps, rather than trying to get a purchase on funky angles. I use a scrap piece of wood where the metal touches the work piece, and the joints come out very tight.
Awesome box. Great video. How lucky is your daughter to have a dad like you.
How good is that, I was talking with a fella who worked for a high end furniture manufacturer here in Australia a few years ago who said that adhesives available nowadays are at times the only form of Joinery used, amazing to think that, nice to see the whole family helping out 👍👍👍
I am always amazed at the strength of the glue I use. If I make a mistake in a glue-up, I only have minutes to take it apart or I will destroy the wood trying.
I think that the correct temperature & also clamping technique will do the job, sometimes I think we over do the process but things like pocket Hole Joinery help in assembly, cheers & take care mate 👍👍👍
Great video! I really like how you thoroughly explained each step with products and tools used!!!
Excellent job! Love your tutorial! Thank you! Can’t wait to make mine.
GREAT JOB. Thank you for sharing. Video well made and easy to follow along. Project is beautiful.
Thank you for such a nice comment!
The box looks really good. And i like your detailled explanations
Thank you!
Really beautiful work! Thanks for the video!
That CA glue trick with the hinge is a great tip
Hi Josh! Thank you!
Brilliant, looks beautiful
That's awesome! Must make one!
Great work; love it. Thanks for upload
It is the first time that I have seen your videos and I have to say that you do it in a way that even beginners like me can follow. Keep up the great work you and your family and thank you
very very very good job
Your work is great! I really enjoyed watching you complete the 2 benches and the pirates chest. I'll continue to watch you work. Thanks, Myron Lubman Altamonte Springs, Fl.
Hi Myron! Thank you very much for watching.
Looks nice! Thanks.
Well done!
Excellent work
Awesome job...its on my lenghty list of to do's
Hi Paul! Thank you!
That looks awesome
a work of art
Thank you very much!
Subbed & liked. I have been looking for a second hand small chest for all my metal detecting finds for the last year but after seeing this I may make my own. What an awesome project. Thank you so much.
Off topic but what is ur pfp?😂😂
Beautiful
Thank you!
15:40 what a satisfying key drop sound
Pure Gold content!!!
Really amazing and beautiful job. Another project on my list to do (building a huge list it seems). The only thing I would have changed would be the stain color. I'd either use a dark stain or try to use one of the aging stain methods. I really enjoy time-period stuff like pirates so I would want it to look ancient almost as it had been burring underground or underwater. Now only if I could find real treasure I could afford all the tools I want but probably don't need lol.
Thanks for showing how & sharing that
Beautiful treasure chest. I wish I had one.
Love this chest and great video , I think I'm gonna build one but use wood pegs sanded flush in place of the screws.
Muy buen proyecto, felicitaciones y gracias por compartirlo.
Muchas gracias
fantastic job, love you!
Nice work!
Excelente trabalho,parabens.Muito bem explicado.Congratulations ,of the Brazil!!!
Obrigado!
I trained under a furniture maker for 36 months, he believed in gluing every surface & wiping the glue away with a cloth wet with very HOT water. I like the chest, bees wax on the threads of the screw is how I do it , after predrilling.
Beautifully done!! I think I am going to try making something similar. Your video gave me some ideas. My projects don't ever go this smoothly. lol Thanks for the video. I subscribed.
Hi Robert. Thank you!
Very nice treasure chest. A good video too. Thank You Sir
Fresh and easy to use
Loved your video and the finished product. One of my coworkers has asked me to make a wedding card box for his upcoming nuptials. This will fit the bill nicely. I'm afraid I might be reluctant to give it up if it turns out as nicely as yours.
Epic very cool‼️
Parabéns irmão , muito bem feito lindo mesmo
Você é muito gentil. Obrigado.
Love this! And what a beautiful name...Rima :)
1:55 - to make sure you don't overtighten, put a piece of plywood cut to the correct width in the clamps with the workpiece.
10:20 - because of the CA glue, you can't remove the hinges to sand. Try painters tape to hold the hinges while you drill.
16:20 - beautiful job. I'm going to use this style along with a hidden drawer to make one for my grandkids. Great video.
Hello, brilliant suggestions!!!
So cool your kids share your interest in making. Nice build
Hi Mark, Thank you!
Beautiful work. Now I want to make one.
Awesome! You should do it. I even have plans if you need it. Thank you for watching.
nice working, thanks.
He created more work for himself.....so when he tells his daughter, "Daddy worked hard on this project, he won't be kidding....WOW!!
Cool story.... now you can tell your daughter “daddy’s a huge fucking buzzkill who rags on other men who do nice things for their kids.
fine woodworking channel indeed.
Nice job, well done good sir.
Thank you very much!
Sehr schön und sauber gearbeitet.Super !!!
Fun. We usually give away something at our PTO school Halloween party. It won't be this year, but next year this would be a great raffle prize. Thanks for the idea.
You have an impressive work shop.
Thank you!
That was bad ass!!..good job!!
Thank you!
Nice chest King!
I love the box! I'm going to use your design as a base for mine. I will be going for a more authentic look by using straps of steel, solid hammer in rivets, forged nails, and distressing-figuring-burnishing the wood before a boiled linseed oil finish. I have been wondering for quite some time what kind of carcass I will use to frame it out. This looks ideal.
That sounds pretty awesome. You should send some pictures when you are done.
Dj Lopeman jhg
Awsome 👍
Is amazing
thanks man!
I'm subscribed...and I really like how you involve your daughters! My daughter and I have taken an investment of her's (a house) and brought it to a whole "new" level. It was really a great time, every minute of it! Thanks for your vids. I look forward to them.
That is pretty cool. Upgrading and renovating a house is a lot of work. Thank you for watching.
so wonderful gift
Thank you!
Nice
excellent!
Thank you!
gosto do seu trabalho muito massa
Você é muito gentil
WOW!!!
good job
Great piece of work mate, quality item along with some great tips.Also liked the quality of the actual video itself, keep it up
Thank you!!
you're more than welcome and I've subscribed as you have a really interesting channel 👍
CONGRATULATION JAMES 😍❤️😘🇧🇷
Hi James
How are you?
It´s really so beautiful.
I´m impressed with the project.
Congratulation for you and your family.
Thank you.
perfect
Where can I get me one of those large sanding sheets for my work bench? Are they self sticking?
lindo demais
amei muito
What are the dimensions of your box? Great video!
hi! I am trying to build a treasure chest for my summer camp kids. I was wondering if you have concrete plans for this project? It would help a lot! thanks so much. the box looks great
+Lisa Cardoza, hi. Plans are available on our website. Thank you. kingsfinewoodworking.com/products/plans-for-the-pirates-treasure-chest
Thanks for posting this video. Im planning to do one of these. What is the angle on the top pieces? Thanks!
who in their right mind would give this a thumbs down?
a piece of art!!!
Haha, Thank you!
The thing is, that when you skip on mobile devices, you may hit a thumbs down. Also, thumbs up and thumbs down are located closely, so some people hit it by mistake and don't notice. It's all up to interface design and people's inattentiveness.
Wish I had s father like you, the amount of stuff I'd want made lol 😆
very nice -
Thank you!
Hello!
I would like to know how did you calculate the angles between the slats for the top pieces.
5:15 I changed my mind, I’m building a mailbox instead
Haha!😃😃😂😂
Bellissimo
I am a very novice woodworker but I would love to build this project. do you have plans for it and the calculations you used to cut the lid pieces?
King's Fine Woodworking. is there anyway I can buy the plans now. I need to get this done for my god daughter by the 13th of March. anything you can do would be appreciated. thank you.
hey im doing this for my school project and was wondering if you could give the plans for it? thanks
hi! I am trying to build a treasure chest for my summer camp kids. I was wondering if you have concrete plans for this project? It would help a lot! thanks so much. the box looks great
kingsfinewoodworking.com/products/plans-for-the-pirates-treasure-chest
How did you come up with the angle cut for the top pieces?
What angle did you use on the table saw for the top? And what was the final width measurement?
Yes I did like your video, and yes I did subscribe.
Haha, thank you David!
Duuude, this looks awesome! I'll try and do one like this.
What angle do I need to cut the stripes for the lid to make it curved like that?
You ever figure it out?
Beautiful work, James!!! Really nicely done! 😃
I really miss your videos!!!
Stay safe there with your family! 🖖😊
Thank you. We have several coming out here shortly. 😁👍🏻
@@KingsFineWoodworking Fantastic! Great to know! 😃
But why's rum gone?
Do you cut the lid strips to width before you angle them or at the same time? I have have made a prototype which was fairly good but room for improvement. The strips ended up narrower.
Excellent sir please mention how many degree did you cut the top wood
Just curious as to how you calculated the angles to rip the top boards to meet the contours of the arched sides? Also, had never seen the oranged, elevated supports you used during the finishing of the box. Do they have a name? Great looking project!
Hey there! Love your videos and they are very inspiring! ( just subscribe! )
I was wondering if you have free plans for this build and really interested in the lock you used for the chest!
Do you have an idea where I’d be able to buy one similar to it for my build
where did you get the "pirate-looking hardware"? I looked in every port, harbour and pier, and can't seem to find any (YaH-harrr)!
Here is the hardware that I purchased from Amazon to build
this Pirate’s Chest.
Butterfly Hinges for the back of the Pirate’s Chest
amzn.to/2jIZadF
Handles for the side of the Pirate’s Chest
amzn.to/2l7hj15
Antique looking aged brass padlock for the Pirate’s Chest
amzn.to/2l72MSW
Wrought iron hasp for the Pirate’s Chest.
amzn.to/2k5BlsG
Very nice Sir, how did you calculate the angles for the lid strips
another great video, really informative. do you make stuff to sell/professional or just as a hobby?
Thank you. And, I do both. I make a lot for my wife and 5 daughters. But I make quite a few pieces on commission too. I also make high end kitchen & bath cabinetry.
5 daughters, wow! I bet thats a handful haha. have you got any photos of your other commission work?
Interesting
what was the angle you used for the lid? that looks like the perfect curve
Thank you! I'd have to go look back at my plans. I don't recall