Thanks for posting your video. I’ve just saved myself over £200 Labour costs and replaced both my headlight bulbs thanks to your video. Most helpful. Thanks again. 😉
Mega thanks for posting up this video, I changed them both about three years ago, with my big hands, it took me a whole 2 days, and there was blood everywhere :) this time I will pop off grill and the trim bits, and ease the bumper down to locate them two pesky hidden screws . Cheers.
thanks so much! i was able to replace the driver side one without taking out the bumper, etc. one more thing though, before you can pull the back piece out, there are 2 small screws need to be unscrewed first. the outside one is relatively easier, the inner one will need a bendable screwdriver or aiming from an angle
One of my headlights has misted up, I was going to take it out and bring it into the house to dry out but this is a lot more involved than I thought. On the same Porsche Cayenne it takes 3 minutes to take the headlight out.
I'm quite sure it was a lake not too far from cradle Mountain in Tasmania It was some free camp I think it was the closest free camp Sorry I can't help more it was ages ago 😅
Hi, the left bulb was used and got coloured white but was still working? I get check left light main beam, corner light not working etc.. But the bulb keeps on working. I think that just once it stopped working. Your video is great but there is so much noise at that part where you are taking it out, that I can not deciphere what you said about it...
I just said to not touch the globe as the oil from your fingers can reduce the life of it and to turn it 45° to remove it from its housing and that it's keyed to it only goes in a certain way 😁 Sorry for the noise it rained quite abit the day before
Great video mate, what happened to the matrix, did it still work or not? I have replaced mine but now the matrix does not work. Auto high low beam is not working. Car is the same even the colour😊
That's a really unnecessary way of doing it, rather shift the airbox (one bolt) which gives you enough space to change it without removing the whole headlight or touching the bumper.
yeah, I just changed both of mine today without removing the bumper just move the airbox out of the way and on the other side there’s what I believe is maybe a AC line or power steering line take a 10 mm bolt out and move the hose just a little bit and you can get it done it’s possible.
Just edited the discription With them I got them off Amazon 👌 Sinoparcel D3S HID Bulb,Replacement High Low Beam Xenon Headlights Bulb -6000K 35W 2Yrs WTY- Pack of 2
Compete BS. You don't have to pull the HL unit out in order to change the globes, it can be done from the back of the unit without any issues. If you follow this video, you are going to break plastic on your grill etc
Thanks for posting your video. I’ve just saved myself over £200 Labour costs and replaced both my headlight bulbs thanks to your video. Most helpful. Thanks again. 😉
Vous avez bien de la chance, moi, tout ce que j'ai gagné, c'est le mal de mer 🤢🤮 impossible de suivre le deroulement des operations 😭
Mega thanks for posting up this video, I changed them both about three years ago, with my big hands, it took me a whole 2 days, and there was blood everywhere :) this time I will pop off grill and the trim bits, and ease the bumper down to locate them two pesky hidden screws . Cheers.
Many thanks. My local dealer just quoted me AUD$1,405.20 to do both sides.
Mate! Youre a legend! Thank you!
thanks so much! i was able to replace the driver side one without taking out the bumper, etc. one more thing though, before you can pull the back piece out, there are 2 small screws need to be unscrewed first. the outside one is relatively easier, the inner one will need a bendable screwdriver or aiming from an angle
I Can replace both bulbs.. With bumper on The car. 😉
One of my headlights has misted up, I was going to take it out and bring it into the house to dry out but this is a lot more involved than I thought. On the same Porsche Cayenne it takes 3 minutes to take the headlight out.
Hey Dude - thanks for the video, it helped so much!!!!!!
Thanks mate. Followed your steps and succeeded.
Excellent explanation it was really useful
Thank you so much!
Very helpful ! thanks !!!
Great video. Wondering the life you had on those gloves?
Great explanation, thank you. That water looks very fishy, where is it? Who do I have to contact to find out about the place?
I'm quite sure it was a lake not too far from cradle Mountain in Tasmania
It was some free camp
I think it was the closest free camp
Sorry I can't help more it was ages ago 😅
Hi, the left bulb was used and got coloured white but was still working? I get check left light main beam, corner light not working etc.. But the bulb keeps on working. I think that just once it stopped working. Your video is great but there is so much noise at that part where you are taking it out, that I can not deciphere what you said about it...
I just said to not touch the globe as the oil from your fingers can reduce the life of it and to turn it 45° to remove it from its housing and that it's keyed to it only goes in a certain way 😁
Sorry for the noise it rained quite abit the day before
Thanks for posting bud. I need to change the mini bulbs in the headlight. Do you any idea where I can find them?
Not that I know of sorry
Great job mate.
Please can you explain what are those lights from inside. They don't work on my tuareg but can see they do work on yours.
Are you talking about the DRL's
Great video mate, what happened to the matrix, did it still work or not? I have replaced mine but now the matrix does not work. Auto high low beam is not working. Car is the same even the colour😊
I don't think mine has a matrix or auto high
That's a really unnecessary way of doing it, rather shift the airbox (one bolt) which gives you enough space to change it without removing the whole headlight or touching the bumper.
What about the other headlight?
yeah, I just changed both of mine today without removing the bumper just move the airbox out of the way and on the other side there’s what I believe is maybe a AC line or power steering line take a 10 mm bolt out and move the hose just a little bit and you can get it done it’s possible.
This is buld swap.
What about the globe? The part the bulb sit in… any tips on that?
You should make a video if it's easyer and quicker ppl including me will appreciate it 😁
what ebay bulbs did you use?
Just edited the discription
With them
I got them off Amazon 👌
Sinoparcel D3S HID Bulb,Replacement High Low Beam Xenon Headlights Bulb -6000K 35W 2Yrs WTY- Pack of 2
crazy, so much easier on the T1
And you had time to crack one off 😂
У нас в России меняют лампочки не снимая бампера!
🤦🏼🚗kicks my behind, why is euro cars so difficult all that work 😂just to get a low beam bulb changed
Yer it's crazy hey
I have an Izuzu npr now
And omg Sooooo easy to work on
Compete BS. You don't have to pull the HL unit out in order to change the globes, it can be done from the back of the unit without any issues. If you follow this video, you are going to break plastic on your grill etc
I tried to do it without but it didn't have the clearance when I tried I'm not sure if ever year was the same