Very nice work , I like how you have a coupler on the horizontal part of the drain so that you can adjust the length instead of having to dry fit everything and get it perfect . Not sure what that couplers called and if they manufacture it in ABS . I am using 1.5” drain and want to increase it to 2” . Not sure what the diameter of the duct is on your rough out on the wall?
Great work, but I can tell you are not a plumber :) it will work for a while but can’t use those 45’s like that. At some point later might have drain issues
You are correct but his work isn’t too bad. Soldering is good and the purple primer looks clean. Gotta clean that flux up throughly with a rag after trying to shine it up. I noticed guys that do that their joints get green after a few weeks because of the acid. I give him a 7 out of 10. Work looks clean but venting is kinda meh.
I really like this Diaz guy- even if he is team Milwaukee!! he does good quality work. but its another power tool brand beginning with M for meeeeee, its team teal all the way forever.
You should of stuck to picking lettuce Amigo because what you did with the lav drain arm is totally against code! Then again you probably aren't licensed anyway & never took out a permit or got a inspection!
Рекомендую тебе сначало установить смеситель и шланги на раковину пока она не установленна и сифон ( слив), что бы потом под раковиной не лазать с фонариком а просто подключить останется. С уважением Русский мастер.
A P trap has several rules this one fails do to your only allowed one pipe fall diameter from trap to vent should of just put 90 out straight no 45 and used a po. Extension to get to lower trap average height for rough in drain 18inchs to 19 will work for most vanity sinks
In Florida plumbing code you cannot use bends to change the elevation of that waste arm or it breaks the vent.
Very nice work , I like how you have a coupler on the horizontal part of the drain so that you can adjust the length instead of having to dry fit everything and get it perfect . Not sure what that couplers called and if they manufacture it in ABS . I am using 1.5” drain and want to increase it to 2” . Not sure what the diameter of the duct is on your rough out on the wall?
I do all this myself. Self taught and I’m damn good.
Awesome man!!
Pro tip, mount the faucet and drain before you set the vanity top, it’s a lot easier.
Lovely!
Dress the basin before you put it on the unit.
Much easier.
Oh.......buy box spanners.
Why did you have to raise the drain stub out? Was the 45 your only option.
Great video. Thanks for sharing.
Dude takes pride in his work
You’re supposed to put a sanitary tee behind the wall that way it drains and has a dedicated vent. Not bad though
Great work, but I can tell you are not a plumber :) it will work for a while but can’t use those 45’s like that. At some point later might have drain issues
¿Estás trabajando en los Estados Unidos?
Put the faucet and popup on before you set the sink.
Yes I pre install everything before mounting. Great video👍👍👍
Good video, the contractor was helpful in his setup.
Good job❤
Perron
Ánimo bro
Clean work. You need to re-vent your drain with a studor vent, also called an AAV.
You should mount your faucet and drain on to the sink before installing on the vanity. Saves some work trying to get it tight in a small area.
Поближе к плитке ,не мог обрезать трубу? 0:53
Very nice
Muy bien una cosa el grifo i la válvula se colocan antes de poner el lavabo así es más fácil i rapido
Ikea loves this guy
Wrench for compression have stick to fix valve in a place. No need adjustable.
Nice, nothing u wont have a go at well done.
Looks clean af👍👍
👍🏽tre bien 👏🏽👏🏽👏🏽
Así instalaba la tubería de cobre cuando empecé de plomero, mi jefe me ponía mis regañadas
Yes
Very good
You can't jump a trap arm up.
Auto fail.
Looks good to me
💪💪
Супер мастер, браво
Flunk....Waste arm s-trap. Knowledge is power
Cuanto cuesta remodelar un baño?
Replace the tailpiece 1 1/4 chrome looks cleaner
Te felicito varón muy buen trabajo 👍
Solo que le mato la ventilación.
Where are you located. Please come remodel my bathrooms.😢
45 is a no,no
bro you did a great job the saying says people cant help but they sure can correct you do u man loooks great
Now The trap is no longer vented. Once you went up with a 45 degree fitting you lost your venting.
You are correct sir must be a Harry homeowner it definitely wouldn't pass
Builshit it is still vented. It was draining wasn’t it?
@@davidmcmullen3780 fill the sink up all the way and see what happens
It will drain but the trap can self siphon .
You are correct but his work isn’t too bad. Soldering is good and the purple primer looks clean. Gotta clean that flux up throughly with a rag after trying to shine it up. I noticed guys that do that their joints get green after a few weeks because of the acid. I give him a 7 out of 10. Work looks clean but venting is kinda meh.
Muy chido aprender ese trabajo 👀
Perfect job done. You are awesome man.
That drainage is illegal.. I can tell your not a licensed plumber… If your going to do plumbing and post it… At least find out how to do it right…
Why plastic Home Depot valves instead of stainless steel Dahl valves?
I'd installed faucet and po plug before setting vanity top, just sayin
I really like this Diaz guy- even if he is team Milwaukee!! he does good quality work. but its another power tool brand beginning with M for meeeeee, its team teal all the way forever.
Tools name please sir
Muito top
Respectfully, I have questions about your Lavatory arm. “The Drain “ in relation to the vent.
It's wrong
Hi sir. I'm from India. I want to. Work with you. Give me sponsorship. Please 🙏
😮✅
Caballero, en que Ciudad ofreces tus servicios?
Donde estan????
You can't solder like that and then do that with that branch.
Ah cabron, no todo te queda cuachalote viejon
Hello, me george
Am I the only one that uses a basin wrench?
You should of stuck to picking lettuce Amigo because what you did with the lav drain arm is totally against code! Then again you probably aren't licensed anyway & never took out a permit or got a inspection!
Do you have to be an idiot about it?
Bravo!
Рекомендую тебе сначало установить смеситель и шланги на раковину пока она не установленна и сифон ( слив), что бы потом под раковиной не лазать с фонариком а просто подключить останется.
С уважением Русский мастер.
Бестолку талдычить, всё равно будет делать по своему.
Great video what is the name of the pipe slice and hand held deburring tool you used?
Красота
A P trap has several rules this one fails do to your only allowed one pipe fall diameter from trap to vent should of just put 90 out straight no 45 and used a po. Extension to get to lower trap average height for rough in drain 18inchs to 19 will work for most vanity sinks
This fool must be Diaz
Amigo muy mal tu plomeria .
Hii comment kre please ❤️❤️👍
Инсталляция конечно хорошо но не по нашему сантехнику
S trapped
Mal trabajo en la plomeria, siendo yo plomero no apruebo tu trabajo de plomeria.
NOTE TO SELF....DO NOT USE DIAZ CONSTRUCTION!!! Unless you want to pay someone else to undo the damage and do the job right.
Вот интересно, почему этот латинос так уверен в герметичности спаянных им (и спрятанных за фальш-стеной) труб?
Nope
Flunk
👎
Браво! Вертуозно! 👏👍
Es una mala plomería le corto la ventilacion al lavamano
S trap
S trap