When Steve mentioned Bob Barker I thought he was going to cut too a scene of Happy Gilmore. Gonnalearn is gonna be ready soon. Its a shame that the Camaro ZL1 only made 40whp more with a 2650 blower over the stock blower. Should have stayed with RPM to do the blower swap. His results would have been much better.
I’m anxious to see how much can be rung out of that ZL1 without meth or bigger injectors and pump. Hard to imagine that there’s much headroom without fuel upgrades
I know you don’t like tuning trucks Fran... but this channel needs a turbo LS pickup build... Im perfectly willing to go into debt for the channel and let you guys do my 09 5.3 single cab short bed... I’m local lol
You can tell Fran that paddle tires are definitely fun in the fresh powder, but the snowmobile guys get pissed when you leave ruts on their nicely groomed trails!
One fran's zr1 block with all the holes drilled and then fixed with plugs I'm interested to see if the block will stay the same temperature in those locations as a standard block without the holes.
I'm upset Steve didn't add the happy Gilmore clip when Bob barker knocked him out on the golf course. He made the reference but no clip. I must say I'm disappointed sir 👀🤷🏾♂️🤣😂
You guys should do a breather package or something where it’s a full intake setup so cold air and intake manifold, heads, headers and cat back! Then instead of just heads it would make some serious power with Bolt-on’s
Hey steve , have you recorded or had a car come in for only head fix and a&a kit ? Been going through all the vids can't find one . Just curious what a sleeper setup like that would do . 650-700rwhp ?
Majority of the vehicles are stick shift. They have done converter work on the drag race vette. But most of the other automatic trans, blower cars are factory blower cars getting a bigger or ported blower / fuel setup. the converter still goes with the combo and the drivability... BUT when someone goes all out they usually do a full RPM stage ?? transmission and leave it at
@@jhack2231 . I hear you but they mostly do auto cars as fran tunes the tcm as well. So I'm just curious to know if the gm converter is that good and only slightly less ineffective as let's say a circle D converter. Noone that I've seen over the last couple of years has had one installed id like to hear what the guru fran has to say.
23HP gain after he spent $6,000+ on an aftermarket blower? When you told him he must have threw up in his mouth a little. It was blowing all kinds of smoke on the dyno, the tune must be no timing and super fat. These shops.....
I love your guys channel! Sometimes I feel like ugh more corvette and camero content. Same ole same ole. Maybe try to do something different once in awhile possibly?? Regardless you guys rock. Just getting repetitive is all.
This Sunday 9am EST Fran's ZR1 video will be up! (uncut and uncensored!)
I love it 💯 rpm
Nice!
Sweet
That dude probably regrets not having you guys continue working on his zl1. His wallet probably regrets it also lol
I was waiting for steve to insert the scene of bob barker beating up adam sandler 😂
yo i can watch the first 6 seconds of this video for 10 hours straight. Eric is a GIFT!
When Steve mentioned Bob Barker I thought he was going to cut too a scene of Happy Gilmore. Gonnalearn is gonna be ready soon. Its a shame that the Camaro ZL1 only made 40whp more with a 2650 blower over the stock blower. Should have stayed with RPM to do the blower swap. His results would have been much better.
Jsb is the best c6 color hands down
It's a toss up with JSB or cyber grey metallic for me.
Love the vids matt great job buddy keep up the great work rpm for the win
I’m anxious to see how much can be rung out of that ZL1 without meth or bigger injectors and pump. Hard to imagine that there’s much headroom without fuel upgrades
I know you don’t like tuning trucks Fran... but this channel needs a turbo LS pickup build... Im perfectly willing to go into debt for the channel and let you guys do my 09 5.3 single cab short bed... I’m local lol
You guys have a great channel! It's cool to have a top-tier shop in Delaware. Fran needs a V3 to have a place to put the baby seat!
Do you know what wheels were on the 2650 ZL1?
You can tell Fran that paddle tires are definitely fun in the fresh powder, but the snowmobile guys get pissed when you leave ruts on their nicely groomed trails!
One fran's zr1 block with all the holes drilled and then fixed with plugs I'm interested to see if the block will stay the same temperature in those locations as a standard block without the holes.
All lsx blocks have those holes. They were just a diff thread pitch
@@RaceProvenMotorsports thanks for the info love your channel
7:05 Sounds like it would be an oring boss fitting (ORB). I believe the thread pitch is the same as JIC and AN.
I'm upset Steve didn't add the happy Gilmore clip when Bob barker knocked him out on the golf course. He made the reference but no clip. I must say I'm disappointed sir 👀🤷🏾♂️🤣😂
Very informative
You guys should do a breather package or something where it’s a full intake setup so cold air and intake manifold, heads, headers and cat back! Then instead of just heads it would make some serious power with Bolt-on’s
Gosh dang LT motors are torque monsters!
Do you guys ever show how the cam gets synced with the crank?
Just line the dots up
Want to see the numbers on the ZL1.
Any track dates set down there yet?
Hey steve , have you recorded or had a car come in for only head fix and a&a kit ? Been going through all the vids can't find one . Just curious what a sleeper setup like that would do . 650-700rwhp ?
I agree black purple banshee is sick
RPM turning into "The Big Barn Banshee Bonanza"
Serious question tho. Why do none of these cars ever do a converter? Am I missing something? 🤔
Majority of the vehicles are stick shift. They have done converter work on the drag race vette. But most of the other automatic trans, blower cars are factory blower cars getting a bigger or ported blower / fuel setup. the converter still goes with the combo and the drivability...
BUT when someone goes all out they usually do a full RPM stage ?? transmission and leave it at
@@jhack2231 . I hear you but they mostly do auto cars as fran tunes the tcm as well. So I'm just curious to know if the gm converter is that good and only slightly less ineffective as let's say a circle D converter. Noone that I've seen over the last couple of years has had one installed id like to hear what the guru fran has to say.
Most of the time they are not needed specially on newer stuff.
Just an idea, anyway to have a Fran's car/engine build episode by itself? Or a series?
It will be Sunday's video
@@RaceProvenMotorsports Thank you, you're efforts are appreciated.
Fran needs to dyno one of the modded banshees...do any of them have aftermarket cylinders or porting?
I saw 5 banshees... How many is Fran up to now...
Those cars have the bad heads on them still ?
Steve keep up with the 3 episodes a week!
trying to
@@RaceProvenMotorsports Tell Fran he can pay you with a Banshee
New drinking game... every time Steve says "Killer"... go
You're really in for it this Sunday then haha
Those boys down in Florida should use your tuning services.
Damn I guessed 485 for the red zo6 baseline. I WON
4:23 I'd probably have picked 490. Angry Eric 5/29/20. Awesome buddy, awesome...
So how much did the heads on the C6 Z06 cost? Just to combat the valve drop issues right?
Our prices are on our website. Yes to fix the valve issue
Oh lawd!!!!!!
Time to start putting those banshees on the Dino😏😎🤣
Lmao i don't drink them but I thought mat was drinking a white claw
That is what happens when uncle Rodney says hi.
Wheels on the zl1?
I was wondering the same thing, they look nice, and much easier to clean.
🔥2650 ZL1🔥
Did the blue one make less power in torque because of the intake?
Or does red one have lighter wheels?
Hey I think fran needs to start looking into banshees he might like them ...🤣😂🤣😂
I wish I could bring my Zl1 and have Fran tune it. A good tuner is so hard to find....
nothing is stopping you lol
I could see all the knock on the ZL1
shit, yall need to get a couple more banshees
At 20:46 was that a anchorman reference? Lol
Maybe Greg at kong can machine Fran some plugs, that's be cool, have a good one guys👍
I love it my guys rpm keep up the work and I love the video and I love Camaro zl1 and g8 lot 💯💯💯💯💯
@14:54 It’s Monster Cam time 😂
STD whp is for inflating egos, it should be SAE numbers. Gale Banks
Bing Bang Boom to Bing Bang Vroom?
" I probably would have picked 490" 😂😂 hahaha
Jesus Fran are you cornering the Banshee market or in need of counseling 😂
Banshee Fetish. Not sure it is healthy. Love the channel.
Looks like banshee Ville!
Nice!!
Black zl1 sounds really angry 😤
Eric lol 469 haahha every dam time!
23HP gain after he spent $6,000+ on an aftermarket blower? When you told him he must have threw up in his mouth a little. It was blowing all kinds of smoke on the dyno, the tune must be no timing and super fat. These shops.....
"The Franshee"
I hope you guys charged that black ZL1 owner double. He’s dense as shit.
I love your guys channel! Sometimes I feel like ugh more corvette and camero content. Same ole same ole. Maybe try to do something different once in awhile possibly?? Regardless you guys rock. Just getting repetitive is all.
RPM is a GM shop. What exactly are you expecting lol?
Is there a shop like RPM near Chicago. I need my 17 Z06 beefed up.