This was a really well done video. Thanks for posting. If you could have mentioned the color of the wires at the fan connectors that you used it would have been perfect for me. Still, very helpful and thanks!
Hit with a hammer the back center in each fan, carbon dust can adding friction to the motor fan. It worked for me when the motor wasn’t start or the fan was running slowly.
You can, it would be cheaper to replace the motors. If your fan shroud is bad, then just get the whole assembly. Otherwise, just get the motors, the motors are the same for both sides.
My HR overheats when I turn the Ac on any idea what it could be ? The fans turn on weirdly sometimes both on, sometimes only 1 with a delay before it turns on
Thanks for the very clear debugging walkthrough. This was extremely helpful!
This was a really well done video. Thanks for posting. If you could have mentioned the color of the wires at the fan connectors that you used it would have been perfect for me. Still, very helpful and thanks!
Hit with a hammer the back center in each fan, carbon dust can adding friction to the motor fan.
It worked for me when the motor wasn’t start or the fan was running slowly.
I did this. It worked. Thanks. Just dont know how long it will last lol
worked for me as well, thanks fonesca
Worked for me too
Thanks for the video!
How do you remove the fan relays from the IPDM engine room(car}? There are three relays and I'm unable to remove them. I think one is bad.
is it possible to have just one bad cooling fan motor? Seems the passenger side fan doesn't come on, but the driver side does
I have the same problem, did you ever find out what was wrong with it
What if the fans do turn on during the auto test but wont kick on under normal operation?
Are both the fans supposed to turn on ?
Thanks I'll do this in a little
Is it better to replace to motors and reuse the fans since the blades don't go bad?
You can, it would be cheaper to replace the motors. If your fan shroud is bad, then just get the whole assembly. Otherwise, just get the motors, the motors are the same for both sides.
Is it the same procedure with Infiniti FX35?
My HR overheats when I turn the Ac on any idea what it could be ? The fans turn on weirdly sometimes both on, sometimes only 1 with a delay before it turns on
Could be the cooling fan.
Which door button do you press?
OK, I figured it out, it's the door open/closed sensor in the door jamb, not the buttons to lock/open the door.
How did you check the connectors on the fans?
Stuck resistors into the pin holes and then used a multimeter.
@@srsairbags I'm a bit new to this. Are the resistors purely to help hold the multimeter into the connector? Or do they server another purpose?
@@nwparker7 purely to hold the multimeter leads in place. Good luck.
@@srsairbags Thanks! I was able to use some paperclips. Yep, need new fans