As an Amazon Associate I earn from qualifying purchases: amzn.to/3KjChpH To Donate Financially via Zelle use my email address: aguyandhisprojects@gmail.com To donate financially to the channel via Paypal: www.paypal.com/cgi-bin/webscr?cmd=_donations&business=5PRRGY4GM2CSE¤cy_code=USD
Very respectable garage my friend, very organized, gave me ideas. Also, good advice on the swap out, going to do mine in about five minutes. I bought the same one.
@@AGuyandHisProjects , hey, glad to say it is awesome! I got it installed with the help of your video, it was a little difficult to get to but I got it with your suggestions! Anyway, thanks brother, it starts like a dream now
I did it from underneath form bottom used a 3incn extension a wobble in the middle and a deep well 13 mm with a Milwaukee 12v ratchet swap took total 10 mins my excursion is lifted 6 inches on 35 inch tires
I spy a DC power xp270... Nice. I just built my own with OEM denso parts for $158 out the door. A large case hairpin just like that. Painted the case green so it looks pretty. I'll post a video. I got 200a at dead idle, and over 250 when super hot at 1600 rpm. Now looking to do the starter upgrade, and thinking of swapping for the 6.4 starter, which is a bolt in affair. Should be just as fast in theory. I see them go for about $120 for a genuine OEM Motorcraft reman. I'll post a video of that too. I have the 6.4 starter motor in my 7.3 and it cranks stupid fast. That vid is on my channel. Nice truck! She's clean! I also have a clean 04 king ranch that's getting fixed up real nice like I've done to my old 03 7.3. I love these oil fired trucks to death! I'll never get rid of them!
I bought a xd 6.7 starter for my 6.0 and it lasted about 7 starts and I had to install my old starter in the parking lot at my kids baseball game in July 98 degree heat. Their products are garbage 🗑️🚮
As an Amazon Associate I earn from qualifying purchases:
amzn.to/3KjChpH
To Donate Financially via Zelle use my email address: aguyandhisprojects@gmail.com
To donate financially to the channel via Paypal:
www.paypal.com/cgi-bin/webscr?cmd=_donations&business=5PRRGY4GM2CSE¤cy_code=USD
Very respectable garage my friend, very organized, gave me ideas. Also, good advice on the swap out, going to do mine in about five minutes. I bought the same one.
Thanks for the compliment! Let me know how it goes. Mines been installed for a bit now and I still like it
@@AGuyandHisProjects , hey, glad to say it is awesome! I got it installed with the help of your video, it was a little difficult to get to but I got it with your suggestions! Anyway, thanks brother, it starts like a dream now
I did it from underneath form bottom used a 3incn extension a wobble in the middle and a deep well 13 mm with a Milwaukee 12v ratchet swap took total 10 mins my excursion is lifted 6 inches on 35 inch tires
Thanks for watching and the comment! You put the standard one back in or upgrade?
I spy a DC power xp270... Nice. I just built my own with OEM denso parts for $158 out the door. A large case hairpin just like that. Painted the case green so it looks pretty. I'll post a video.
I got 200a at dead idle, and over 250 when super hot at 1600 rpm.
Now looking to do the starter upgrade, and thinking of swapping for the 6.4 starter, which is a bolt in affair. Should be just as fast in theory. I see them go for about $120 for a genuine OEM Motorcraft reman. I'll post a video of that too. I have the 6.4 starter motor in my 7.3 and it cranks stupid fast. That vid is on my channel.
Nice truck! She's clean! I also have a clean 04 king ranch that's getting fixed up real nice like I've done to my old 03 7.3.
I love these oil fired trucks to death! I'll never get rid of them!
They keep on trucking for sure
Is there an equal for the Dirtymax?
I bet there is! Check out their website, I am not an affiliate or anything with them but will say she starts much much quicker!
sure is cost about 18grand called the add .1 letter swap comes in 6.7 Cummins or powerstroke
Says it’s not intended for the 6.0 “upgrade”. Still working?
Yep, zero issues! Starts up quite a bit quicker. So far I would recommend it and it has been several months since install.
I’m guessing you work for them. I got one. Started truck 3 times just fine. 4th time…nothing. Won’t even turn over. Sending back. Junk
@@mikemcdermott9551 no sir, no affiliation no nothing. Bought with personal money just like everybody else. Sucks it sounds like you got a bad run :/
Apparently. 3 starts now dead. Hooked the old one back up and works fine.
@@mikemcdermott9551 dang
I bought a xd 6.7 starter for my 6.0 and it lasted about 7 starts and I had to install my old starter in the parking lot at my kids baseball game in July 98 degree heat. Their products are garbage 🗑️🚮
Bummer to hear. Mine is still doing great! Did you reach out to them?