Lenovo Tab 3 10 "Plus tb3-x70l - Sensor Replacement Disassembly

🔥 SUPPORT THE CHANNEL !!! SUBSCRIBE AND LIKE 🔥
Become a channel sponsor and you will get access to exclusive bonuses. More details:
/ @ifixyou
This video shows how to replace the sensor on the Lenovo Tab 3 10 "Plus tb3-x70l tablet. Remove the back cover of the tablet, it is latched. Unscrew the battery protection and turn it off. Disconnect the sensor cable. Check the new sensor.
We warm up the sensor, on a hair dryer 180 degrees, if there is no experience, set it to 150 degrees and lift the sensor with plastic, you can use alcohol. We clean the frame from the old scotch tape. We glue double-sided tape and apply B7000 or t7000 glue to the tablet frame and glue the sensor. We connect the sensor cable.
Putting the device together.
We press the touch glass, you can use clothespins or rubber bands, after 3-4 hours you can use it, but preferably after 10 hours.
Details to which you can transfer help, support, gratitude and for the development of the channel
DONATE - DONATE
streamlabs.com/vgeni4kadisass...
www.donationalerts.com/r/evge...
WEBMANY / webmoney
Z299720621617 USA Dollar
E513530553569 Europe Euro
#tb3 #x70 #replacement

[@iFiXyou]

ПОЯВИЛИСЬ ВОПРОСЫ? ЗАДАВАЙ ИХ В КОММЕНТАРИЯХ
DO YOU HAVE ANY QUESTIONS? ASK THEM IN COMMENTS

[@sergiogreenoff]

Здравствуйте! А почему использовали и скотч, и клей? Изначально, я так понимаю, сенсор просто на клею держится... Может быть, и тут можно было только клеем ограничиться?

[@iFiXyou]

тоньше стекло и чтоб крепче держалось

[@sergiogreenoff]

@@iFiXyou понятно, спасибо. :)