Nissan Frontier Mod 12: Front LED Bulbs

Today we install new LED Headlights, Running/Turn signal and Fog Light Bulbs in my 2020 Nissan Frontier. The process is pretty simple with a few quirks that are outlines in the video. The Auxbeam brand makes some decent bulbs and I am very happy with them. Below you can find links to all the bulbs mentioned in the video. Please let me know if you have any questions. Like and Sub please!
9007 Head lights - a.co/d/hN3RKBp
H11 Fog Lights - a.co/d/5XJRTiF
7443 Turn Signals -a.co/d/gbPPL51

[@Nd4SpdSe]

For LED headlights, normally there's a screw under the O-ring that allows you to split the bulb and let you install the retaining ring. Last time I saw an LED bulb comparison test, the Auxbeam headlights scatters quite badly. Those look to work quite well and you can see the very similar beam pattern comparing LED to the Halogen, really showing people that a good LED will not scatter and blind others.

[@lucascovitz5708]

I bought the same bulbs. Are you aware if the resistors on the headlight bulbs get hot? Say, hot enough to melt plastic? I had that happen in another vehicle, so I want to be careful when mounting mine.

[@localfisherman7592]

@@lucascovitz5708 haven’t had that issue yet

[@mrg8428]

The tight spot screw can be removed with a 1/4" ratchet, socket, and a Phillips driver bit with a hex shape.
I tape them in so they don't fall out.
I never trust double sided tape.
GOOP glue on alcohol cleaned surfaces works best. Tape/wedge the item till cured.
How much did all that cost?

[@localfisherman7592]

@@mrg8428 Hey! I’m glad you found other ways to install. I think it was around 90$ for all of it. Going to do the rear lighting next.