How to enable cruise control in BSI and engine ECU using Diagbox Peugeot Citroen vehicles
Вставка
- Опубліковано 2 кві 2023
- A quick guide of how to run a global scan and then activate cruise control using diagbox, there are two menus where the cruise must be configured these are in the BSI and then engine ECU.
Where to buy a full chip Lexia 9218165C tool on ebay?
(This is an affiliate link, we do not have any association with this seller but this is the right item, linked because I get so many messages asking where to buy it):
ebay.us/bQAptO
Where to buy on Amazon:
amzn.to/48mtCik - Авто та транспорт
Hi. Hoping for u a well being. Sir, I need ur help regarding how to enable curise control option in 2.5G mark x ecu, please. Any idea or suggestions which help to resolve this problem.
hola funciona con un peugeot 308 del 2018?
Hi Steven, great video thats very clear. Do you know if this would work for any 207? Ive got a '10 plate 207CC. Dont want to spend money unnecessarily.
Will it work for honda city 2009 model. i-vtec ,???? please let me know
internet connection needed for the ecu peugeot partner 2018 ?
Hi 👋
I have problem with cruise control on my Peguot 308 1.6 HDI 2008
When i drive and go in fifth gear cruise control works...but when i shift up in sixth gear cruise control turns off.... What can be the problem with this??
If you're not allowed through on the config page, change your version to an older diagbox before internet coding was compulsory, try V7.57 for example.
Hello @StevenLewis-HDI-Tuning, I have Peugeot 2008 GT Line (year 2020) automatic diesel with full equipment, active safety brake (radar+camera), parking sensors, blind spot monitoring. I don't have active cruise control and full parking assist. Is it possible to unlock these 2 features with DiagBox? Thank you in advance
@@Janchek1992 it probably is, but you'll probably need the most up to date version which would mean a trip to the dealer. I found it won't let us do config in new stuff without an internet connection to PSA
Ciao. Funziona su peugeot 2008 restyling?
Hi Steven, could you point me in the right direction as to where you sourced your version of DiagBox please. Thank you.
In the description
Hello, do you have a version that telecodes a 2018 Peugeot 308 without a token?
Start at 7.57 then keep updating until you get the option
Hello, can you actually set a speed limit in the BSI or engine ECU? I want to set it to 70mph. Thanks
Yes there is a way, I have a feeling that's only possible on vans as you don't normally see the menu. Have a look around, you should find it. It's in 2 or 3 locations, engine ecu bsi, then somewhere else in the bsi, that's what I remember from the last time i turned one off but that was a long time ago now.
Does anyone know what a power latch is when doing a reinitialise is says what till end of power latch 👀thanks paul
No maybe it means to wait until everything powers down? Obviously a bad French translation
hi, would you be able to activate lane positioning assist and grip control on a peugeot 2008 (year 2020)? if yes, could you make a video guide? Thank you.
I guess it would be possible if you fitted all the required parts
Did you manage to enable it in your 2008 by any chance?
Hello. Thanks for the video. Do you know if works for 206 1.4hdi 2005?
Yes it does if that option is in the ecu
i tray you video , done step by step , in display start show cruise contol but when tray on when draiving blinking --- and no work cruise control peugoet 308 2012
See if there are any more options in the dash and in the bsi menus. Sometimes you need a different brake switch to make it work.
Hey bro, I'm running into a problem, each time I try to activate it on Diagbox 7.57 it tells me "secure configuration not authorised invalid key". It doesn't even ask for a key, it just says invalid. Any idea how I can fix this? Thanks
What if you change car brand and use a similar model?
Hello Steven, I did all of that in pp2000, I think I should wire the brake 4 pin switch to the ecu, do you know what are the pins I should conect to the switch? Thanks a lot.
I think you fit a different switch and no wiring is required. I've never done it, so not too sure sorry.
@@StevenLewis-HDI-Tuning thanks for your answer. The brake switch has only two cables in it, but has space for another two.
@@dieseltips I have no idea, try to copy the wiring from a car fitted with cruise already?
it works for 206+ 1.1 2009 petrol with 4 acc cables and 2 clutch cables
it works on any peugeot
Do you think it will work for a peugeot 206 from 2007?
Great video, even as a forienger it wasnt too fast or too slow
Yes most likely it will work as these ECUs usually have the cruise control software inside already
Hi mate, just looking for a bit of clarity in regards to the diagnostic tool.
I've got a 2007 citreon xsara picasso which I'm trying to stop the new second radio I installed beeping and also try to get the cruise control working.
Is the diagnostic tool in the link going to be compatible with my vehicle? also I only have a laptop with windows 11 installed, I've read It needs to be an older version of Windows for it to work. Any advice would be greatly appreciated.
Windows 10 with all antivirus and protection removed don't do this on your daily laptop the cracked software is full of viruses
@638king
Hi, thanks for the reply!
I think I can download and revert back to windows 10 on my laptop, if I use the software just to do the jobs, then I can wipe the harddrive and restore my windows 11. Hopefully this mitigates the viruses as it is my only laptop.
Just another question, is there any other reason you can think of why my CC isn't working? like I said, it's not a retrofit, it was already installed in the car when I got it. I've also changed the break/clutch switch. My stick doesn't have a speed limiter, it just has an on/off. No light appears on the dash if I turn on. I don't know if that's normal and it just turns on when the CC is engaged.
Is it just a case that even if all the components are installed there's a chance it's not been activated?
Also, are you based in London? (or near) if you wanted to send me a quote to look at the CC and radio beep, that would be ideal for me.
@@andrewwalker9479 probably there is a fault stored for something in one of the modules so cruise won't work
Ok, thanks for that. So do you think I should be able to investigate/fix through the lexia digabox? Gonna order one later today if so.
My friend, it is the same ecu EDC16C3 1.4 HDI, 2003 model BSI computer coding is ok, but Cruise control RVV does not appear in the menu in the engine computer, can you help me, what do you recommend me to do, is the vehicle not supported?
@@bnyo it's not an option in that SW, you could try fitting a newer 1.4 ECU where it was possible, but then it will also use a different bsi so might not be so easy to do that
😮@@StevenLewis-HDI-Tuning
Hey Steven, good work.
i have Peugeot 207 from 2007.
1st changing is done. (Present)
In the 2nd part ecu, after changing to present, the updating is failed. Any idea? Tips
Are you in the correct ecu type?
@@StevenLewis-HDI-Tuning
İt works now. İ downgrade the diagbox software and it is now present. Cruise Control works. Tnx
Hey Selim i have a Peugeot 207 2008 and on BSI i Can activate it but on thé ECU doesn't work ( absent) i have diagbox v7.57 / ECU J34P kfv engine thanks you for helping me
@@dzcars9434 if the option is not there it's not possible on that ecu software version
@@dzcars9434 Hi, excuse for late respons. I succeeded with version 7.02. Try with this. Higher version kept crashing when activating ECU, lower version its activated.
Do you have the plugs behind the brake and clutch?
Hello all, I've retrofitted cruise control into my 207 auto and it instantly turns off after switching it on the only issue I can see is that it thinks the clutch is constantly pressed. Will I have to add a clutch sensor or how do I get around this? I have configured it in BSI and engine
Try fitting the correct double brake switch
@@StevenLewis-HDI-Tuning it's already got a double brake switch is there a different variant?
@@kyleprueitt6592 did you set clutch switch not present in engine ecu configuration? Not sure if that's an option on this one.
@StevenLewis-HDI-Tuning yes not made any difference, might it be worth putting a switch on there just to trick it?
@@kyleprueitt6592 do you have the right setting for the stalk, is it cruise with speed limit rvv or just cruise on its own? You've turned it on in the bsi too?
Hi Steven,
anywhere i can chat with you had a query on cruise control..
Its not a service I offer, only made this video to help people but I don't do further advice or special advice on this.
Hi Steven, i try do do everything you said but after i log in to engine managment and after going further i get this error : Acess to the authentication server is not possible, please try later. What should i do? I have 9.91 digibox
Thanks
Try diagbox v7.02 or 7.57
Thank you for your reply. I have 2014 peugeot partner, now installed the v 09.129 and same problem. BSI step no problem. But after entering ECU and Manual configuration i have 3 options :
ECU downloading, Injectors classification and Cinfigurable vehicke speed governed. I entered all 3, no chance. So i kinda cannot enter BSI alteady on 2 programs 🙁
I have edc17c10
@@denismackevics9371 yeah so go to an old version it will allow you to do it ;)
Thank you, will tey. Where can i get the old version? :( Because this one my friend installed for me. The 2022-2023 version :) Thank you for your help
Hey man nice video would like to know if we can update bsi even this china clone ok?
Yes
@StevenLewis-HDI-Tuning thanks brother. Can you send me link for the item in aliexpress
My ECU is not telling diag box what type of ECU it is so I cant activate CC in the ECU : .(
Did it detect the VIN of the car at the start? Usually if it doesn't know the ecu type you simply select it manually.
@@StevenLewis-HDI-Tuning It did get the vin and it wants me to chose the ecu type so I guess Ill have to pull out the ecu
Will this work with KKL cable?
Only actia lexia cable full chip version
Does it need an account online and tokens?
no
how to do this on edc17c10?
Its the same
I have a 207 1.6 HDI 8V with the EDC17c10. I can code the BSI but not the ECU with Diagbox 9.15 because it wants to "phone home" first. Does it work without internet connection in the older Diagbox versions?
Windows xp only...
For pp2000 you need xp, diagbox works on windows 10
I brought the thing using your amazon link (some cables and CD). I put the CD into the PC and there is a "Lexia 3" for citroen, and pp2000 for peugeot, but none of them work
So, which other diagbox is needed?
I found the diagbox on the second CD🤦♂️
I have noticed that my windows was updated to the 11 version, then i have installed 10 and currently i am running the instalation for the diagbox.
anyone knows what to do if im stuck at driving assistance? It wont load any further 🥲
You mean the software is stuck? Try a better computer maybe
@@StevenLewis-HDI-Tuningits a gamer pc, ive installed it in a ssd for better performance and it still wont load