This frame is tough as nails just amazing .I crashed 4 times any not one break or broken props the frame prevents damage to your motors and props. I love the way the quad fly's with your rates. I'm sure in time my skill will get better. the stick feel so good i can't believe how much better it feels . You are truely a fpv captain. My Jedi.
Got mine today, just finished assembling it. Great, really thoughtful design! One piece of advice I'd offer to anyone who's gonna build this frame - def tighten the initial 8 screws that sandwich the arms between the top and bottom plates a little at a time, and make sure you leave yourself some wiggle room to shift things around a bit until you get all 8 screws aligned and started. The tolerances are 𝙫𝙚𝙧𝙮 tight - which is great for rigidity and structural integrity (this thing feels like a 𝗧𝗔𝗡𝗞!) but can make that alignment and tightening a little tricky. Can't wait to complete this build!
I'm loving this frame so far. Super easy to assemble. It's my lightest freestyle build yet. Can't wait for WCT23.. have a feeling it's going to pretty epic.
I have been trying to decide what frame to go with next. Bots hasn't dropped yet. Then you just blew my mind with this new frame. Just ordered 2. I was in your trailer at RAMPAGE. Had a you stopped and talked to me and another guy outside. He bought 2 of your quads rite there on the spot. I was jealous. Now I can build my own. Keep ripping my brother!!!
Bro have Sean make some clear plastic inserts for the V in the frame for the camera then run less through it. A lit V flying through the sky would be dope!
Hundo. You nailed it bro. Love the quick arm change design, and the Avata consideration. The press nuts for the stack is brilliant. Camera, and motor protection. The option for the battery to switch up. It needs the Ummagrip pad because of the button heads on the top deck that always dimple my packs.
awesome frame alex this is probably the best innovation in freestyle frames i've seen in a long time. the bottom plate assembly is amazing and next level. Way to go.
These small innovations are really nice. Looks like a step forward. I really dig the press-nut on the stack screws, that should actually help the tune, as well. Good job Alex & crew.
i got my frame today, it looks sweet, the only think i will say is the location of the battery strap holes are great if your running a gopro, but if your not running a gopro its way too far back to run toilet tank and not have it be super rear heavy, a couple extra slits for people not running a gopro would have been a nice addition, another thing is the camera plates, the triangle should mount upside down compared to how it is now, if you impact with the top plate it would actually brace the top plate from shifting backwards and bending screws and standoffs a lot better. also not the biggest fan of all the plastic, but otherwise its looking good and i cant wait to fly it
Just built one of the two I ordered. Holy rigidity 🤯 the frame build is really simple, but well thought out. The attention to small details are indeed a nice touch, can’t wait to fly these frames! Great work Vanover 👍
Press nuts on the stack screws is i think my favorite feature. Really makes mainainence a breeze, and you are less likely to inadvertenly loosen your stack screws when tightening your stack retaining nuts
Awesome looking frame love the simple lines and design, cant wait to see some more review and test videos come up and hopefully someone in Aus stocks it 👍
Scale down to 3 or 3.5 inch... And scale up to a 7 inch... Base can stay.. Just need different arms... If thickness changes a bit thinner for 3 and thicker and or wider arms for 7 inch that would make a complete drone series then...
I've just crashed my 5" drone and broke an arm of its frame. It is a pure pain in the ass to replace a broken arm on it! Your frame is pretty well designed and looks freakin durable! If I only had a frame like yours, it would be so easy to fix it!
Awesome frame! Recommended motors props etc on the site where you buy the frame would be a cool addition. As well as your full current configuration you fly. Peoples wanna know ;)
Man, this is a really good looking frame! Such a simple and clever design! I really love the carbon fiber camera mounts. Only buying frames with those. And the press nuts for the stack - awesome! And you also answered all of my "why"s just right after it appeared in my head while I was watching. Gonna buy this one for sure! I wish you had a distributor in Europe.. With all the taxes and shipping costs it's going to be something around 120-130 euro to get it here now.
Very nice. This is the first frame I've been excited about since I started using the Switchback. I see this frame as an excellent platform for so many builds. I have been using the Switchback as a platform for my racing, freestyle, and even a 7in long range. The problem is the Switchback is built for one thing, racing. I have been forcing it to work because its the closest frame I found to what I wanted,... until now. You've really hit that balance of weight/strength/reparability. I hope you offer 7in arms for this at some point cause I've been wanting a 7in freestyle rig and I think this would be the best frame I've seen for that. I really like that you took into consideration that every frame fails, and designed it so when it does, it's likely to fail in a "good" way. I looked at the link you provided for the prints and even a few of those stood out as being designed by someone who knows what they're doing the bumper on the front specifically.
Love it. Now... what´s the most flight time I could get in just hover mode ? With the best and fanciest battery you know ? Just curious. I´m obsessed with endurance.
Congrats on the release, this frame looks awesome. Any chance a big Air Unit fits in the back? And just an idea but shouldn't the camera plates be more robust in a frontal crash mounted upside down with the diagonal strut of the V piece going from front top to back bottom?
Have u compared stand off design ? I like the hex style stand off on the apex . Easier to hold from spinning when tighten screws , also ant mounts and camera mounts if used tpu the hex design holds prints in place better . Also feel they might be a tad stronger then a standard round gnurl
It’s ATek approved. Lol for realz tho I flew one of the first proto types for a while and it was butters.
I can imagine the carbon starting to cry when it realized it was going to you. haha
I approve as well.
I'm talking to the Zimmer company about having them build a new frame for me. Should be exciting 🙂
Nice design features./ and U included back middle standoffs.. Smart man.
Yup! When I do my first build next year this is my top frame pick now.
necessity is the mother of all inventions, great frame!
This frame is tough as nails just amazing .I crashed 4 times any not one break or broken props the frame prevents damage to your motors and props. I love the way the quad fly's with your rates. I'm sure in time my skill will get better. the stick feel so good i can't believe how much better it feels . You are truely a fpv captain. My Jedi.
Good job Alex!
Oh hi Winston!
Beautiful Frame Alex.
Nice frame dude, many good idears in there.
Baller!!
Great job on the frame luv it 😎👌🏽
Dude that’s a sexy frame🔥
Can’t wait to check it out!
If something is Vanny approved I trust it. His no BS, all proof history speaks for itself.
yessss!! Ive been hearing about this frame lately! I can't wait to try it out!
Building this one for sure.
With an ultra too my Homie.
Finally! 😍🔥🔥🔥
Got mine today, just finished assembling it. Great, really thoughtful design! One piece of advice I'd offer to anyone who's gonna build this frame - def tighten the initial 8 screws that sandwich the arms between the top and bottom plates a little at a time, and make sure you leave yourself some wiggle room to shift things around a bit until you get all 8 screws aligned and started. The tolerances are 𝙫𝙚𝙧𝙮 tight - which is great for rigidity and structural integrity (this thing feels like a 𝗧𝗔𝗡𝗞!) but can make that alignment and tightening a little tricky. Can't wait to complete this build!
That little piece that holds the arms in when changing the bottom plate is ingenius. Great work, Alex!
I built this frame last month. It’s awesome!
Looks good!
I'm loving this frame so far. Super easy to assemble. It's my lightest freestyle build yet. Can't wait for WCT23.. have a feeling it's going to pretty epic.
I am so excited to buy one!!! Thanks Alex!!
Great work Alex🙌 Everything is well thought out and those little innovative details of the bottom plate are next level🔥
love your stuff man you're a huge inspiration!
Nice design
Just got this frame and starting the build this weekend!!! So stoked
I have been trying to decide what frame to go with next. Bots hasn't dropped yet. Then you just blew my mind with this new frame. Just ordered 2.
I was in your trailer at RAMPAGE. Had a you stopped and talked to me and another guy outside. He bought 2 of your quads rite there on the spot. I was jealous. Now I can build my own.
Keep ripping my brother!!!
5:26 Ivan Miranda would be proud
Super clean design ^^ I think It's a win on all fronts modularity ,repairability, packaging.
I like it vanny. I’ll be buying one that’s for sure
The bank account balance is going to go down! It's a crazy frame😇
The frame looks very appealing, will put it on my "to buy" list.
Great!
Oh! Watchin!
Bro have Sean make some clear plastic inserts for the V in the frame for the camera then run less through it. A lit V flying through the sky would be dope!
Intriguing design....good stuff👊👊😎👌🎉🎊🎉🎊👏👏👏
Very nice frame Alex 👌 great job
Hundo. You nailed it bro. Love the quick arm change design, and the Avata consideration. The press nuts for the stack is brilliant. Camera, and motor protection. The option for the battery to switch up.
It needs the Ummagrip pad because of the button heads on the top deck that always dimple my packs.
Congrats on the frame release. Looks like a tank.
I'm definitely gonna put this one in my wish list Christmas is just around the corner.
Beautyful...it looks very solid
Great design Alex. Exited to try it out :)
I'm impressed well done Alex.
Nice frame 😍
Congratulations on your new frame. Looks very well thought out. 👍🤓
You are my favorite freestyle pilot but will racing be back? It would be a dream to see a DVR
awesome frame alex this is probably the best innovation in freestyle frames i've seen in a long time. the bottom plate assembly is amazing and next level. Way to go.
Love the look of this!
For sure gonna get one, great design!
These small innovations are really nice. Looks like a step forward. I really dig the press-nut on the stack screws, that should actually help the tune, as well. Good job Alex & crew.
Nice preview video 🙌 the frame looks durable 🔥
I really like the innovation!!
Can’t wait to check one out!
Just received my frame great work there its awesome
M8 it looks really good and thought effort and experience into the perfect frame 👍🏻👍🏻
I want it.
Nice!! At first I saw this frame, and didn't think much of it.. But now that you explained the details, I'm much more intrigued. Super cool design!!!
Great frame vanny! Can't wait to try it out
Live the innovation
i got my frame today, it looks sweet, the only think i will say is the location of the battery strap holes are great if your running a gopro, but if your not running a gopro its way too far back to run toilet tank and not have it be super rear heavy, a couple extra slits for people not running a gopro would have been a nice addition, another thing is the camera plates, the triangle should mount upside down compared to how it is now, if you impact with the top plate it would actually brace the top plate from shifting backwards and bending screws and standoffs a lot better. also not the biggest fan of all the plastic, but otherwise its looking good and i cant wait to fly it
Just received your frames and motors.
Wow this frame is unbelievable.
You are the man!!!
Keep ripping my brother.
Lovely frame, interesting design man!
Show us the frame resonance!!
Looks 👀 pretty well thought 💭 out 👊
Sweet frame! I should have gotten one while i was down there at WCT this year. I the the press nut stack screw
Toilet TANK! Cool frame, glad the interchanging of arms is quick and easy! Everyone is dropping frames, I actually really like your design!
I’m liking it! Just when I thought I was finished buying new frames! 😏
Just built one of the two I ordered. Holy rigidity 🤯 the frame build is really simple, but well thought out. The attention to small details are indeed a nice touch, can’t wait to fly these frames! Great work Vanover 👍
Looks perfect! When my current hyperlite freerange frame gives up I will definitely be purchasing a vannystyle
Looks awesome! First frame I've seen that makes me think about replacing my apex frames with. 🤘
Looks like a ZMR250.
Gotta love a really nice split deck man! I am going to have to give this a shot at some point.
Looks like an awesome Frame, love the fact that you show us a green used quad haha. Good work Alex!
omg what a nice frame. i need this shit
❤
Awesome frame Alex . I’ll definitely getting one👊🏻
I might have to get pick on up!
Nice platform man!
I've been flying 2 of these since release as my everyday quads. I have broken 1 arm and I fr go hard. Much tougher than the apex.
Really nice looking frame Alex I would really like to review one of these might have to pick 2 or 3 of these up
Press nuts on the stack screws is i think my favorite feature. Really makes mainainence a breeze, and you are less likely to inadvertenly loosen your stack screws when tightening your stack retaining nuts
I dig it man!! 🤘🤘
Nice frame design. Keep up the good stuff
Awesome looking frame love the simple lines and design, cant wait to see some more review and test videos come up and hopefully someone in Aus stocks it 👍
Scale down to 3 or 3.5 inch... And scale up to a 7 inch... Base can stay.. Just need different arms... If thickness changes a bit thinner for 3 and thicker and or wider arms for 7 inch that would make a complete drone series then...
I've just crashed my 5" drone and broke an arm of its frame.
It is a pure pain in the ass to replace a broken arm on it!
Your frame is pretty well designed and looks freakin durable! If I only had a frame like yours, it would be so easy to fix it!
Oh damn it’s a need!
Definitely my next Frame 💯👀❤️
Scam
Awesome frame! Recommended motors props etc on the site where you buy the frame would be a cool addition. As well as your full current configuration you fly. Peoples wanna know ;)
Man, this is a really good looking frame! Such a simple and clever design! I really love the carbon fiber camera mounts. Only buying frames with those. And the press nuts for the stack - awesome! And you also answered all of my "why"s just right after it appeared in my head while I was watching.
Gonna buy this one for sure!
I wish you had a distributor in Europe.. With all the taxes and shipping costs it's going to be something around 120-130 euro to get it here now.
So sick seeing the frame come to life! Hyped you developed a lightweight basher🔥🔥
Very nice. This is the first frame I've been excited about since I started using the Switchback. I see this frame as an excellent platform for so many builds. I have been using the Switchback as a platform for my racing, freestyle, and even a 7in long range. The problem is the Switchback is built for one thing, racing. I have been forcing it to work because its the closest frame I found to what I wanted,... until now. You've really hit that balance of weight/strength/reparability. I hope you offer 7in arms for this at some point cause I've been wanting a 7in freestyle rig and I think this would be the best frame I've seen for that. I really like that you took into consideration that every frame fails, and designed it so when it does, it's likely to fail in a "good" way. I looked at the link you provided for the prints and even a few of those stood out as being designed by someone who knows what they're doing the bumper on the front specifically.
Good Job,.... Bro...!!!
Yeah buddy!!!
My favorite part and, now I wish I did it on my frame is the press nuts on the stack screws. Such an obvious feature that every frame should have
Just those stack screws are worth it. Looks pretty awesome. But now the question, will this be available in Europe (Germany), too?
Love it but can’t seem to ship it to Canada from your website!
Love it. Now... what´s the most flight time I could get in just hover mode ? With the best and fanciest battery you know ? Just curious. I´m obsessed with endurance.
Congrats on the release, this frame looks awesome. Any chance a big Air Unit fits in the back? And just an idea but shouldn't the camera plates be more robust in a frontal crash mounted upside down with the diagonal strut of the V piece going from front top to back bottom?
Such a beautiful frame! Vanny do you run a 20° or 30° Session mount? Also what antenna mount is that? Thanks home. Big Fan!
Very cool frame, Alex.
Nice concept.
Would it be possible, to scale down the whole thing, to a 4 incher?
Watch the whole video because there is a lot of good frame tech here.
spam you too
@Telegram Me👉👉@CAPTAIN_VANOVERoffers
Have u compared stand off design ? I like the hex style stand off on the apex . Easier to hold from spinning when tighten screws , also ant mounts and camera mounts if used tpu the hex design holds prints in place better . Also feel they might be a tad stronger then a standard round gnurl