HVAC Service Call: Smoke in Store.
Вставка
- Опубліковано 20 жов 2024
- HVAC Service Call: Smoke in Store. This situation could have ended badly!
Hit me up at hughesmanhvac@gmail.com
Check out the Misfits of HVAC Podcast
/ @misfitsofhvac
misfitsofhvac@gmail.com
I don't usually rag on other companies, but this is an exception and there's no excuse for it. I'd make it known in the write-up that the previous company bypassed the safety.
I mentioned it for sure
Good lord....safeties is 100% non negotiable for bypassing....i dont care how cold it is...never gonna happen....that is a disaster waiting to happen.....nice job Ryan
Thanks Jason, thanks for watching man!
That unit has been hacked in every bad way, lucky the building didnt burn down. Total hackery.
Agree 100%
I've never seen an upside down limit switch before 😂 barking mad ! Immediately dangerous.
Definitely 👍
Good thing you got video. Something tells me that there will be more to this. Like who worked on it previously.
I think so too, thanks for watching
This customer probably didn't call a different company today...
I think it might be necessary to have the owner pull the service history on this unit. The company that performed this “work” needs to be held accountable for it. Some city inspector’s office should be notified if appropriate. That company should be fined and told that further violations will cause them to lose their business license.
This is really a dangerous situation.
Extremely dangerous, totally agree 👍
Good job Ryan, need to issue a BOLO for the Hack installer and the vandal who worked on those units.
👍
Great job Ryan. You should never bypass any safety device unless for testing purposes. Leaving it bypassed leaves you with a whole hell of hurt. Safety is paramount and if it works is secondary.
👍
Dang. That was dangerous
Yes
Omg this was a close call! 😮 this was a good one! No air flow and no limit means it's an oven 😂
Thanks for watching!
What a find !
👍
That’s just the new wireless limit switch
😆
Excellent. Interesting.
Many thanks!
Good one Ryan
Thanks Greg
Might want to see if a wiring harness is available. If not, I'd say they need to replace it. I mean blower motor, possible heat exchanger failure, wiring damage and limits, that's half the unit.
Yeah, I submitted my report and will see what happens.
Great job Ryan you are so thorough
I appreciate that!
Good stuff Ryan. Just dealt with a unit that caught fire because someone had bypassed safeties all I had to do was go take pictures, total loss.
👍
Good find! Last guy out has got some splaining to do.
Thanks for watching pat
Wow. Can’t believe people sometimes 🤦🏼♀️
👍
Who in the heck would bypass a safety. Then walk away and say "it will be alright", No excuse
👍
Please change all those wires. If they got that hot and not yet short, the plastics get very brital and isolation on "still good" wires will flake off soon.
We quoted a new wiring harness
We always drill holes on the outside of the economizer, with no reason to run the wires like that. Much less bypassing limits
Yep
You could have cooked Thanksgiving dinner in that oven, wow everything needs reworked ,I’m surprised that drain pan didn’t melt away, I say new unit is an excellent option.
🍗
That’s crazy, I had one job once we came behind the people that installed it, the one 3T RTU had a main limit bypass with a lil popper 😅. One other 10T had a hole in the condenser from a screw when they put on the hail guards. And they left the manual on top of the burners so when it fired it burned all of the wiring in that compartment
Hmmm... cooked motor, possible comprmised exchanger, comprimised wiring, comprimised condensate pan...... The entire thing baked itself..
If that was my unit it would be getting replaced and i would be going after whoever jumped the limit for replacement value plus.
👍
Scary that there are people out there that do stuff like this.
Yep 👍
Nice work Ryan.
Thanks!
Nice work man. Good video👍🏻 You ever see anything like that before? I never have.
I have not, thanks for watching
Wow! I do not know how anyone could think it was a good idea to bypass a limit or any other safety.
i would replace the wire, that insulation is compromised, the way it was creaking and cracking it exceeded its rating, 90C is 194F and a new insulation pad.
I agree, I’ve filled out my report and also have the video. Appreciate the input, thanks!🙏
Surprised if any of the wires in the blower area are good insulation wise
Probably not, they were hard and brittle.
What’s your opinion on the plastic pulleys on VFDs? Have been bypassing vfds due to unavailability and after bypassing we change the pulleys to steel since bypassing gives to much torque on startup and blows them apart. All this nonsense just to meet efficiency standards. Carrier going downhill
Not a fan of the plastic pulleys either
Looks like what we call Chuck in a Truck was there. Is was a service tech that trained when I started would call them. Plus filter change in December and did not cut the heat off. SMH . Good luck with that unit.
👍
Some tech, somewhere has some explaining to do!
👍
Bring back the melted filters to your shop and show your guys
👍
Great Video. Thank you for sharing. May I ask, what is the same and different between roll out switch and high limit switch ?
Roll out switches are typically manual reset so they have a little button you need to push if it trips otherwise it will not close again by itself. High limits on the other hand tend to be automatic reset because they can be tripped by dirty filters, low airflow, etc but they will automatically reset and the unit will light back up. They should not trip during normal operation with clean filters, so if a unit is cycling on limit (running until it hits high limit then shuts off then lights up when limit recloses) there is usually a problem to fix somewhere.
Thats why you dont bypass safeties...
Exactly 👍
I wonder if the whole unit needs to be condemned and replaced
i know i would as it would be cheaper to replace than sit there and rewire and replace 90%of the unit
👍
That ac you looked at with the plug pulled looked like a single circut system
Start for fire burning smell on the wires check in see if there all connected you can’t not let the customer turn on the unit for safety reasons
👍
Need to replace the unit
👍
Wowser….😳😳😳🔥
👍
What are the chances that the person who did all that managery is watching this video……..
🙏
Where u located?
Those machines have fixed orifices. Pick yourself up a mini Guage so your not bringing up a whole hose.
These units have txv’s
I would be surprised ,if you do not have that limit in your van.
Me too
2:00 no wires at the limit ?
Yes someone bypassed it
What did it smell like? 😆
😂
one question Why didnt the duct smoke shut down the ac?
well if the disabled safety is any indication i'd have to assume either bypassed or not equipped also that fire department needs to go back to training as it took them 3 times of coming out to shut the unit down
It may have, the alarm company and fire department were both there before me and it was shut off by the time I showed up.
That return smoke detector sampling tube is backwards.
I think it got hot
Me too, this unit has since been replaced
121 thumbs uP
👍
Replace the whole unit. it can't be trusted after that.
Agreed! This unit has already been replaced. Thanks for watching!
Owes inspect the job
👍
Replace the unit!!!!!!!!!
We did
Them Raheem is much better
👍
Are group will do the job and take off and not do the job the right way
👍
that is crazy!
Thanks for watching
Nice vid ... Thx
Thanks Eddy!
i feel patronized
?