Auxiliary Lights wiring using a Relay
Вставка
- Опубліковано 26 лип 2024
- Best Auxiliary lights
amzn.to/3cP1Wpc
amzn.to/3bU6YzL
amzn.to/2TnVldN
4 Pin Relay ROOTS amzn.to/36g4XfP
You can reach me here
Instagram
/ vishalahinave
Facebook :
/ vishal.ahinave9
Facebook Page :
/ imvishalahinave
Visit my Amazon StoreFront
www.amazon.in/shop/vishalahinave
#Pulsar220 #AuxiliaryLights - Авто та транспорт
Best auxiliary light installation video. Great example of less is more. God bless you man!
You delivered the information perfectly. No _annoying_ music, no unnecessary editing. Just perfect. Subscribed.
First of all kudos to the detailed beautiful video you've made. And thank you so much for making such videos. Lovely.
It's great video bro. Very clearly you expline each an every section. Thank you 👍👍💯
You've explained it so well and made it so easy for us. Thanks man!
This is a different approach for installing relay to aux light. Most of the videos on UA-cam have the No. 30pin connect direct to the battery. I feel its convenient as we don't connect any wire to the battery be it from relay or auxlight.
THANKS MAN
You're just awesome dude, I always like your videos, keep it up bro.
🔥🔥😍 amazing 220f lovell
Very informative demo video of DIY installation of auxiliary light, I will try to my Vehicle but as for the info I will directly connect it to my Car Battery. Thank you for the informative DIY Video 👌👍👏
Expecting more videos on ur 220 bro ur videos are awesome keepit up bro
Great bro you make quality content really appreciate for your effort.
super bro perfect clarification
Awesome video man really good tips
Very nicely explained video, Thanks Bro
Thanks alot brother
It wAs so clear and understandable ☺️
You earned my subscribe ☺️
Super bro
One of good detailed video i have seen
Thank you for the knowledge
Very nice..😍😍😍
Fantastic video bro!
nice video and explanation
Thanks sir for the great & clear tutorial. Ride safe..👍
Excellent, thank you.
great video will try it tomorrow
Awesome
Send me another video of connection of 2 lights to motorbike...i like this one
Using a relay will reduce the heat in stock wiring... I'm using H7 55W hid kit in bike, previously I'm connected it to the stock wiring. After 1/2 hour of usage the wires getting hot.. after I'm change the entire headlight wiring and put the relay to ignite hid ballast.. now the hid's warming up quickly... I'm also using Fog light in another relay..
Relays are really useful
Very informative video. Why did you not connect fuse ? Was that not necessary?
Thankyou bro
Nevere realised that the speedo could ever 'misbehave' . I wonder how that works.
In case you connect the wires to the wrong pin of ignition coupler, speedometer turns on without key.
Great video 👍👍 ! I use Thimson Heavy Duty Relay Wiring Harness for my Auxbeam 72W 12inch LED bar for my Gixxer ! In one H4 Socket I connect my Bike's Headlight which is also Nighteye LED & in other socket I connected Auxbeam LED bar using spade connectors (Positive in Highbeam & negative in Ground) ! So whenever I use passing light or Highbeam switch, the high beam switches on including my Auxbeam LED Bar !
What is the use of relay ? Will it consume less battery ?
@@Chinmay.__ It will keep the battery healthy
wow man!
what an explanation... great,
so good as I was finding,
great job...
nice info at last also
loved it,
subscribing your channel as snapdragon... keep it up bro
bro If I use 12v 15A relay, then?
there is only 12v 15A relay available, No 12v 40A is available.
Yes you can use.
thanks bro, but will it improve the light intensity or I have to search for a 12v 40A relay
Can we attach both the switch wire to 85 and 86 and 30 wire in ignition switch
Yesterday my bike pulsar 150 caught fire wiring busted , now will be installing a new wiring harness and will be installing aux light with relay setup
Very well explained👍
Bhai fuse kaise lagate hay
Mujhe apni car ki fog light k liye lagana hay
Fuse optional hai, car me 12v source direct battery se lena ignition se nai aur battery to switch me jo wire hai usme fuse connect karna 2 relay pins use karke fuse ka holder bana sakte hai
bhai bahut jyada battery consume karte hai ye dono light inhe start me hi on karna padata hai warna battry low hone ka dar rahta hai..
Depends on the condition of battery and type of wiring.
What if the light has 2 modes like high beam and low beam
0:50 if I want to install fuse , where I need to install it in the diagram
Pulsar 220 led flashing brake light video upload plz
*Bro, I have installed two 20w fog light and two strobe flashing light at rear on swingarm on my P220F BS4 ABS and I have get power supply from ignition, not directly from battery but my question is my bike is new and I have installed them without rely so would it affect battery life or voltage in future ? I haven't faced any issue so far.*
Add relay for fog lights, it will increase life of the lights and keep the battery safe. Let the strobe lights work on ignition.
Bro. First thing first, your video details everything. I really liked the way you explained and the most important is the last screen with tips. All i would like to know is why should we ground the -ve wire and why not we connect it to battery 🔋-ve terminal?
You can ground it anywhere, battery's negative pole or on the body.
Thanks a lot for your response bro.
After the lockdown I'll visit your place to get it done, I don't trust myself when it comes to electricals...😅
Aao haveli pe
hahaha😂😂
If there is a 12v battery wire socket is available in wiring. Kit. Then we can connect 30 to that. In yamaha RX ?
Yes you can
Hello. I'm usser pulsar 220 f from indonesia,
Bro is relay needed for hjg mini fog light?? 20watt each mean total 40watt i want to install in my mt 15 it has 4ah 12v battery so is it necessary to fit with relay?
You can fit without relay or with relay, mini fog light consumes less power.
Do the same fog lamp to RR 310
Can I use 70amp 4 pin Minda relay for fog light??? For my bike
Yes you can
@@vishalahinave thanks bro
I already have a connection from the ignition coupler, so would there be a problem with the connection from the ignition coupler to install the fog light?
Would it be a problem to have two connection wires together in the positive of the ignition coupler?
Depends which lights you have installed
@@vishalahinave honda dio bs4 scooter me pass light switch install kya so ignition couplers k positive se connection liya tha. Agar me or ak connection ignition k positive se leta hu to kohi problem hogi?
How much maximum wattage can use for motorcycle 12v battery friend?
I tried pair of 48watts, was working fine.
Diagram for headlight relay please 😋😋
Is 10A fuse fit for 54w lights?
Yes
Where can I get these relay thimbles?
In spare parts store
can you also add a fuse?
Yes you can
Hi bro is there any need for fuse because mine is 120w
Yes you can add fuse to wire which goes from switch to battery/ignition
@@vishalahinaveActually Iam planing to install like what you have done, is it ok for 120w bro?
Yes no problem at all
@@vishalahinave Thanks bro👍
Bro maine try kiya lakin bike ki battery low ho gayi hai
Vishal its Confusing 😎
Refer to the diagram.
Music name please
Buddha kontekst & Joakim Karud dreams
@@vishalahinave Thanks a lot vishal bhai🙏🏻😍
Try to come in front of camera 🎥 and talk it would be more interesting