There is a catch actually. That while working with something that have a rotating part it can actually tear the glove a bit, pick up a thread and pull your hand towards it. Had and accident with some guy and an angle grinder (he got REALLY BAD CUT on his hand). So its wise to either wear nothing or use gloves with two pockets, one for four fingers and second for the thumb that guys on the steel mills use and probably have its own name even. They arent comfy at all yet you can drop them very fast in an emergency
Man I miss this UA-camr. Your videos are so informative as a mt07 owner for 4 years and now wanting to do a lot of performance mods to make the bike interesting again. I wonder why you went awol
The usage of Johntron and Iron Man. Subscribed. Pure genius. Also, for anyone that wants a quickshifter but doesn't want to buy a tuner or quickshifter, just let off the throttle for a split second and shift. Works best when accelerating harder. It's quite clunky at low speed and harder to master. Also, you can quick downshift. Blip your throttle just a tiny bit as you gently push down on the shifter. You can even clutchless shift into neutral. Bonus points for coasting to a stop and throwing down your kickstand and never putting your feet down.
It seems pretty fiddly. I installed a HM Quickshifter to my MT07 and didn't need to flash the ECU. Plus they come with custom rods which was the right length for my bike. It has a little control unit which sits under the seat where you can change settings too. Seems to be a better solution although a bit more expensive! Nice video though.
First thanks you for this video!! I've been waiting this video since i have my flashtune installed, now i can really decide shold i get this quickshifter on my fz-07 or not
Nice to see a new vid! 👍🏻 so why don’t you rev match gearing down ? Ik someone with a quick shifter that gears down... finally getting some nice weather in Ontario, I’m bout 2 1/2 3 hours from Toronto ✌🏻
Thanks! Im not sure what you mean but, the MT-07 doesnt have electronic throttle, so it wont be able to blip the throttle on downshifts. I have to do it manually by hand (and I do rev match, for some reason its really quiet on video. Otherwise my rear tire would be skidding all over the asphalt). And the weather is finally getting better 😎 Thanks for the comment!
Quickshifters are basically the same as you would clutchless shift your motorcycle. Instead of blipping your throttle by hand, quickshifter does that automatically. There is 0 damage in the long run. To reassure check out this vid on clutchless shifting a bike and the effects it has bit.ly/2H3lWH9
I also have a quickshifter on my MT07! i wanted to ask you how hard do you have to push on the lever for it to change gears,i found out that with my setup i have to shift with quite some force for it to engage the next gear,have you had similar problems? i saw your kill times posted,maybe i'll try those! love your videos btw!
Hmm quick shifter shouldn’t decide how hard you have to press to shift. I had similar issue on my mt10 however, if your shift lever is too low instead of ur foot lifting it you will be pushing it. So my only advice is to lift up the shift lever by spinning shift rod and that might fix it
I never upshifted without the clutch before installing this. I occassionally get missed gears and it doesnt always feel that smooth... almost as if I am just rev matching manually. No need to lower the minimum rpm, activation, or next shift delay?
The main con for me is simply : With a bit of training you can achive the same with clutchless shifting ! RoyalJordanian did a video about it, he's even faster this way on the Nuda than with his quickshifter equipped S1000R haha !
Shifting from 1st to 6th isn't being faster than a quickshifter. It's a useless feature. I was someone that thought that quickshifters were useless for the road, until I tried one on my bike It's fun
Is it truly worth it? Does the bike really even need it? I mean, it's an FZ07 not exactly a racing bike or a track bike. Don't get me wrong i love my FZ07, but there are at least 3 other components I'd spend money on first. New mirrors, new exhaust, fender delete kit. But i like the video. Thanks for all the info :)
Hi! Did you end up adjusting the kill times in the end or kept the default? I also noticed you have flashed QS 1.0 and when I checked it right now says QS 1.1! I also ordered the ftecu qs despite their bad support/availabillity, however i noticed they moved from An old ticket system to An forum, so maybe they respond now :D, Lets see!
Hey, the stock kill times are okay. In certain situations it would jerk, especially if you shifted without accelerating. I also had a problem where my bike would jump down to 4th after quickshifting into 5th which was pretty scary. Most of that got fixed by increasing the kill times. Here is an image of how I have it set up ibb.co/c6TJ427 and its working pretty well. I also have a video coming out on all the settings, I use for the FT ECU but not sure when Ill get it done.
@@TURBOTWINKIE thanks :-), I am looking forward to it :D. I have Read indeed that the 5th and 6th gears can be tricky, some even modified the gears physically. I noticed that the QS v1.0 is a little different from QS v1.1, in QS 1.1 you don't have to specify killtimes per Gear per rpm! I read it uses the internal ECU ticking system to time it perfectly... You should try it :-) (ofcourse keep An copy of the old one), I think v1.1 gets loaded once you download a fresh copy of the stock/unrestricted ecu. Which pcv mapping are you running BTW? With stock or unrestricted version? Is it running fine? Did you do the Throttle body sync? I also would love an video on valve adjustment 🤭
The healtech qs requires you to have a bunch of wires running to your ignition coils and you need to find space for a control box which just adds more clutter imo. Just like healtech you can adjust the timing in every gear and at every rpm, plus it would have been 140 dollars more than ft ecu. I just like when everything is done on the ecu and there no wires everywhere :)
only up. The FZ-07 is cable throttle so it can kill the injectors/spark for a split second. But it can't blip the throttle. You can blip your throttle and push down on the shifter to clutchless downshift. But go easy. It's pretty aggressive and can chirp the rear wheel.
Hi. I installed ftecu flash and quickshifter. I have a problem. When changing gears, the engine shuts down for a long time. 1 second approximately. Do you have any idea what the solution is?
Hmm, I've never encountered any problems, I flashed the bike tenths of times. The only thing I could think of is the kill times are set for too long that is why bike shuts off when you change gears. I dont think thats the problem though. Id contact them directly. Here are the kill times Im running ibb.co/c6TJ427
Well you actually can shift without clutch, up or down regardless if you have a qs. You just dont have to blip, or release throttle when shifting with quickshifter. But yes, MT-07 doesn't have electronic throttle so the quickshifter wont work on downshifts. Hope thats not too confusing :)
nope, not on FZ/MT-07. You can only quickshift up. It's a throttle cable so you can't do it. You CAN clutchless downshift by blipping the throttle and downshifting. You need a bike that is throttle by wire like a FZ/MT-09, R1/MT10 etc.
Hello. I have quickshifter installed on my mt07 with the default sotck values. Activation delay 05ms Next shift delay 0500 ms Sensor type NO The problem is When the gear change is activated, the engine shuts down for approximatelly 2 seconds haw can i solve that? I attach a photo. Thank you
Probably will get mt10. The cool thing is if I get mt10 I can just swap this quick shifter into the other bike and enable autoblip on downshifts :) so kinda works out for me
@@TURBOTWINKIE Keep both. MT10 is very thirsty. So MT-07 as daily and MT-10 for weekends. :) The money/fuel you save completely pays the MT-07. Ask me how I know. :] Nice video btw.
I would like to inform all upcoming customers to look into Woolich Racing Tools or something else, instead of FTECU, it is a shit company. For example, this thread is going on for months now: forum.ftecu.com/discussion/383/problem-quickshifter-mt07/p4 It is not the only example, actually, the FTECU tuning suite is useless, without their products, and only theirs, you're unable to do dyno runs, without spending hours and hours making an custom map. The unrestricted mapping is fake too, it is computer generated and does not work well at all. Also for people thinking, cheap tuning, it is not, I spent nearly 1k now and it is running fine, however an tuner could have done it for me by now.
"make sure to have a parent or guardian watching you" how many kids are installing quick shifters these days.
That's what I was thinking
Just thinking that 😂
Or better yet, Who's kids are riding sport bikes these days??
Calls my mom, hey can you watch me cut this on video call? Gotta stay safe.
and how many kids are riding 700cc hyper naked bikes?
1:52 nice gloves i really believe they help you from getting cut.... Love your videos man
Welp I guess they are better than nothing lol
TURBO TWINKIE i dont think wearing nothing would be Worse lmao
Dayrian 20 I don’t thinks so either
There is a catch actually. That while working with something that have a rotating part it can actually tear the glove a bit, pick up a thread and pull your hand towards it. Had and accident with some guy and an angle grinder (he got REALLY BAD CUT on his hand). So its wise to either wear nothing or use gloves with two pockets, one for four fingers and second for the thumb that guys on the steel mills use and probably have its own name even. They arent comfy at all yet you can drop them very fast in an emergency
Man I miss this UA-camr. Your videos are so informative as a mt07 owner for 4 years and now wanting to do a lot of performance mods to make the bike interesting again. I wonder why you went awol
You might be one of the new who've put one on the MT-07. Mad props!
Fivvc ikhqqtLifted_Above uiuuuyuuu
The usage of Johntron and Iron Man. Subscribed. Pure genius.
Also, for anyone that wants a quickshifter but doesn't want to buy a tuner or quickshifter, just let off the throttle for a split second and shift. Works best when accelerating harder. It's quite clunky at low speed and harder to master. Also, you can quick downshift. Blip your throttle just a tiny bit as you gently push down on the shifter. You can even clutchless shift into neutral. Bonus points for coasting to a stop and throwing down your kickstand and never putting your feet down.
It seems pretty fiddly. I installed a HM Quickshifter to my MT07 and didn't need to flash the ECU. Plus they come with custom rods which was the right length for my bike. It has a little control unit which sits under the seat where you can change settings too. Seems to be a better solution although a bit more expensive! Nice video though.
EnglishBikerDan install a QS in the cb and make a vídeo 😁
@@GGozzMontanelas Unfortunately they're still sold out 😭
EnglishBikerDan is there no aftermarket?
I have Tracer 7 2021, I think it’s same your MT-07, do you have a link to buy your kit???? Many thanks
Any link to buy
The humour made this video I’ll sub just for that
Fellow Canadian here 🤙🏻 will be installing quick shifter in the future on my 21 MT07
Damn the marking game in on point bro 🤙🏼
Spasibo za video! Ochen dohodchivo!
no entiendo muy rapido el ingles, pero me parecio muy divertido todo en conjunto, muy buen video
First
Is it bi-directional i.e for both up and down shifts
Or
Just for up shifts.
Only up, you can only have a blipper when you have an electronic gas, which the 07 does not have
Martin S what you mean electric gas?
@@laddaevolta sorry I mean electronic throttle, so that you don't have a cable attached to your throttle
@@martins4079 thats ride by wire
@@adityarai5367 oh yeah there you go, I couldn't remember
Next step : Quick shifter up and down with auto-blipper.
Here in France we have an expression for all of this : It’s Butter for pigs. Hahaha.
HEs back!!
Thanks for the informative video. What’s your phone holder? I like the clean phone/dash setup rather than on the handlebar!
Good stuff, but I prefer to practice clutchless shifting .. And enjoy having more money for gold and silver :-)
Pro tip - instead of using a dremel buy a pipe cutter from the hardware store. Easier, faster., and cleaner cuts.
hi pro... so 9 video... but it is both shift ( up and down ) right ?
You in Canada? If you are what do you think of a beginner getting a mt 07 as a first bike?
Great thanks for this experience share
Makes me want to get one installed for my gixxer 750!
Finally ！！New Video！
Hopefully more are coming!
Correct my friend simply mark the connection points to be sure of length
Thank you, you are a legend!!
Wow. That's all. Wow!
Are you still able to upshift with a quick shifter if you are off the throttle coasting and just to say to switch up a gear
u really kill me at 3:34 bruh
Eagerly waiting for your video man :)
You are awesome 😎😍😎
Love you so much 😋😎😋
Thank you, really appreciate the feedback!
First thanks you for this video!! I've been waiting this video since i have my flashtune installed, now i can really decide shold i get this quickshifter on my fz-07 or not
I'm really surprised that there is 0 info on this topic online. Glad you found this helpful :)
I wish to have Yamaha MT-07 someday. Hehehe
I got one it will change your life ! Thousand smiles a mile
Nice to see a new vid! 👍🏻 so why don’t you rev match gearing down ? Ik someone with a quick shifter that gears down... finally getting some nice weather in Ontario, I’m bout 2 1/2 3 hours from Toronto ✌🏻
Thanks! Im not sure what you mean but, the MT-07 doesnt have electronic throttle, so it wont be able to blip the throttle on downshifts. I have to do it manually by hand (and I do rev match, for some reason its really quiet on video. Otherwise my rear tire would be skidding all over the asphalt). And the weather is finally getting better 😎 Thanks for the comment!
What is ur kill time for everytime u shift?
Good video man. Quicl question, how have you mounted your phone?
I made a video about it, it’s the one about quad lock :)
Nice bro keep up!!💘
Thanks!
Are there any disadvantages on the long run? Any mechanical issues? Thx!
Quickshifters are basically the same as you would clutchless shift your motorcycle. Instead of blipping your throttle by hand, quickshifter does that automatically. There is 0 damage in the long run. To reassure check out this vid on clutchless shifting a bike and the effects it has bit.ly/2H3lWH9
People say no effect but I don’t really trust it, doesn’t really seem worth it to me
Do you have a link to buy this kit? I have a Tracer 7 2021
how did u put your phone that way on your bike? are there any special phonemounts up the speedmeter?
Watch my mt07 mods video I mention it there :)
Does it also autoblips when shifting down?
Nice!
Im actually a level 1 dealer with FTECU, if you need any help dont be afraid to reach out!
I also have a quickshifter on my MT07! i wanted to ask you how hard do you have to push on the lever for it to change gears,i found out that with my setup i have to shift with quite some force for it to engage the next gear,have you had similar problems? i saw your kill times posted,maybe i'll try those!
love your videos btw!
Hmm quick shifter shouldn’t decide how hard you have to press to shift. I had similar issue on my mt10 however, if your shift lever is too low instead of ur foot lifting it you will be pushing it. So my only advice is to lift up the shift lever by spinning shift rod and that might fix it
@@TURBOTWINKIE Thanks! I'll try that
QQ where did you buy the cellphone holder
I never upshifted without the clutch before installing this. I occassionally get missed gears and it doesnt always feel that smooth... almost as if I am just rev matching manually. No need to lower the minimum rpm, activation, or next shift delay?
Do I need need an ECU flash to use this quick shifter? If so that would void my warranty and cause legal issues here in Japan. So a no.
you did not show
where to connect the quickshifter wires?
what phone mount do you have?
Where can I get this Phone holder? Pretty Nice!
Here bit.ly/2YpMNTZ :)
im trying to fit a quick shifter to my 2020 mt 07 where does the two prongs go one to the ecu plug and the other i have not a clue
Does it work up and down, or just upshifts?!?
the only interesting questions here...did you find out?
The main con for me is simply : With a bit of training you can achive the same with clutchless shifting !
RoyalJordanian did a video about it, he's even faster this way on the Nuda than with his quickshifter equipped S1000R haha !
So true man i think it isn´t worth the money
Shifting from 1st to 6th isn't being faster than a quickshifter. It's a useless feature.
I was someone that thought that quickshifters were useless for the road, until I tried one on my bike
It's fun
Is it truly worth it? Does the bike really even need it? I mean, it's an FZ07 not exactly a racing bike or a track bike. Don't get me wrong i love my FZ07, but there are at least 3 other components I'd spend money on first.
New mirrors, new exhaust, fender delete kit. But i like the video. Thanks for all the info :)
It's a fun mod but it's not necessarily
This would be a mod you would do after all of that
Hi!
Did you end up adjusting the kill times in the end or kept the default? I also noticed you have flashed QS 1.0 and when I checked it right now says QS 1.1! I also ordered the ftecu qs despite their bad support/availabillity, however i noticed they moved from An old ticket system to An forum, so maybe they respond now :D, Lets see!
Hey, the stock kill times are okay. In certain situations it would jerk, especially if you shifted without accelerating. I also had a problem where my bike would jump down to 4th after quickshifting into 5th which was pretty scary. Most of that got fixed by increasing the kill times. Here is an image of how I have it set up ibb.co/c6TJ427 and its working pretty well. I also have a video coming out on all the settings, I use for the FT ECU but not sure when Ill get it done.
@@TURBOTWINKIE thanks :-), I am looking forward to it :D. I have Read indeed that the 5th and 6th gears can be tricky, some even modified the gears physically. I noticed that the QS v1.0 is a little different from QS v1.1, in QS 1.1 you don't have to specify killtimes per Gear per rpm! I read it uses the internal ECU ticking system to time it perfectly... You should try it :-) (ofcourse keep An copy of the old one), I think v1.1 gets loaded once you download a fresh copy of the stock/unrestricted ecu.
Which pcv mapping are you running BTW? With stock or unrestricted version? Is it running fine? Did you do the Throttle body sync? I also would love an video on valve adjustment 🤭
Make sure a parent or guardian is watching you? What kid has bike that and is installing a quick shifter lol?
You should've gonne with the healtech quickshifter. Just a few bucks more expensive but in another level.
The healtech qs requires you to have a bunch of wires running to your ignition coils and you need to find space for a control box which just adds more clutter imo. Just like healtech you can adjust the timing in every gear and at every rpm, plus it would have been 140 dollars more than ft ecu. I just like when everything is done on the ecu and there no wires everywhere :)
Can you use the quicker shifter up and down ?
only up. The FZ-07 is cable throttle so it can kill the injectors/spark for a split second. But it can't blip the throttle. You can blip your throttle and push down on the shifter to clutchless downshift. But go easy. It's pretty aggressive and can chirp the rear wheel.
Do you have to pull the clutch in when downshifting or does it do that automatically ?
FZ 07 has a mechanical throttle, you have to downshift manually :)
you update the link to quickshifter ?
what phone mount is that?
I wanted to hear a fly by with the quick shifter
Interesting that not that Long ago Rossi didn't have a quick shifter on his Yamaha.
Is it slipper clutch or slipper clutch is whole different concept?
Slipper clutch doesn’t come on 07. The mt09 does. If u wanna fit a slipper clutch it will cost you around 1k.
You need a power Commander right? Or is it plug an play
You don’t need power commander. You need to flash your ecu to enable it with ft ecu software and harness
@@TURBOTWINKIE how do you do that?
I’ve made a full video on that. It’s linked in the description
@@TURBOTWINKIE Thank you so much buddy
Which phone mount do you use?
Here bit.ly/2YpMNTZ
Hi.
I installed ftecu flash and quickshifter.
I have a problem.
When changing gears, the engine shuts down for a long time. 1 second approximately.
Do you have any idea what the solution is?
Hmm, I've never encountered any problems, I flashed the bike tenths of times. The only thing I could think of is the kill times are set for too long that is why bike shuts off when you change gears. I dont think thats the problem though. Id contact them directly. Here are the kill times Im running ibb.co/c6TJ427
Quick shifter let’s you shift up without clutch, how about the shift down? Still quick or you need to clutch in for that? 🤔
Well you actually can shift without clutch, up or down regardless if you have a qs. You just dont have to blip, or release throttle when shifting with quickshifter. But yes, MT-07 doesn't have electronic throttle so the quickshifter wont work on downshifts. Hope thats not too confusing :)
What’s that iPhone mount ?
When you quickshift down, does it REV match automatically?
nope, not on FZ/MT-07. You can only quickshift up. It's a throttle cable so you can't do it. You CAN clutchless downshift by blipping the throttle and downshifting. You need a bike that is throttle by wire like a FZ/MT-09, R1/MT10 etc.
Is it possible to install a quick shifter on a 2006 suzuki sv 650?
where you learn all of this
is this suitable for MT 15 ?
That part that has the cables running off it is supposed to be in the middle of those two bars. Not on the very top. 😅
Is it an up and down shifter or juste an up ?
The sensor can be used up and down. But on the mt 07 it can only upshift
Hello.
I have quickshifter installed on my mt07 with the default sotck values.
Activation delay 05ms
Next shift delay 0500 ms
Sensor type NO
The problem is
When the gear change is activated, the engine shuts down for approximatelly 2 seconds
haw can i solve that?
I attach a photo.
Thank you
Does it down shift and up shift without clutch involvement?
Only upshift, need an autoblipper for clutchless downshifts.
omg genius
Where abouts in Canada do you live?
Woah look at the speedo tho sksksksksk
lil trn its kmh, the superior unit
Why the sksksksksk?
That must be fun as fuck not letting off the throttle when shifting lol
Why don't u pos,t new sub btw🔥
Thanks! Nice Video and Info👌, I'd like to try this one👍 sounds every Shifts is sweet !😎
#BeRideBack
is it posible bmw g310r ?
have fun with new transmission XD
please tuck your shoelaces in. excellent vid.
You can already shift without the clutch
Yeah but you have to release the throttle to shift. With this you don’t have to release the throttle at all
Just get the healtech quick shifter a lot easier to install
It’s much more expensive :(
Ochen strannij akcent u tebya.
So thats fuckin ZAEBIS
My dirt bike has a quick shifter
откуда ты? как оказался в Канаде?
ayemossold what?
SO EASY MY GRANDMA CAN DO IT!!!
Dude u gotta invest in a bench grinder
Maybe one day :)
Or you could just switch to a mt09 and get a Yamaha quick shifter 😁
Probably will get mt10. The cool thing is if I get mt10 I can just swap this quick shifter into the other bike and enable autoblip on downshifts :) so kinda works out for me
@@TURBOTWINKIE Keep both. MT10 is very thirsty. So MT-07 as daily and MT-10 for weekends. :) The money/fuel you save completely pays the MT-07. Ask me how I know. :]
Nice video btw.
Английский уровня "родной"))
Ah yes the noisy ass chain rattling away
Where’s the vids!? Lol ✌🏻🇨🇦
Alot of money just to avoid a quick clutchless shift
A lot of money for fun.
I also think this is a little overkill for such a bike, but if you love it…
I would like to inform all upcoming customers to look into Woolich Racing Tools or something else, instead of FTECU, it is a shit company.
For example, this thread is going on for months now:
forum.ftecu.com/discussion/383/problem-quickshifter-mt07/p4
It is not the only example, actually, the FTECU tuning suite is useless, without their products, and only theirs, you're unable to do dyno runs, without spending hours and hours making an custom map.
The unrestricted mapping is fake too, it is computer generated and does not work well at all.
Also for people thinking, cheap tuning, it is not, I spent nearly 1k now and it is running fine, however an tuner could have done it for me by now.
Yamaha shifter same as all the rest but over priced
Or just buy a new street triple. 😁
Hello Buddy this Quickshifter work UPshift but does it also work DOWNshift?