Great video, Vince!!!! This coming from a 30 year veteran of finishing drywall. Pre-filling gaps in seams ahead of time IS crucial. Critique? 2 of them (you knew it was coming) 1. Instead of "dry" running over screws, i always had the mud going. Find a flaw? Correct it while mudding using the techniques demonstrated here. 2. Remove that god-awful sticker from the side of that mud pan!!! LOL! Hyde, I've found, have the best 6" knives with the slightly rounded BRASS-headed handle. Steel can gouge and form edges that could cut the user. Just a heads up to those ppl who may be rushing out to get a finishing knife with any metal-tipped handle. Thanks for the video and God bless! 😁
You da man @me again Same way I've come to do my muddin'. Also any major gaps like the one showed at the beginning, or any outrageous corners get filled and or skimmed before laying the tape and corners. Makes for a quick and painless tape job. 👍 and VCG you're a beast!
@@MostlyPeacefulCombatVet A brass- headed handle is also great for circling/marking flaws in the dried mud work. You probably already know that, though. 🍺
@@meagain6028 for sure. But not everyone does so it's great to have the pro's of the very cool gang sharing info such as that! Everyone appreciates that! 👍👍
Hey Vince! Ryobi guy here again reppin green team. I hang/finish drywall 8 days a week, use the new brushless makita drywall screw gun with the push drive feature, and a makita impact driver to remove any misses or get in to corners / angles that the countersink collar on the screw gun can not get into all the way. Always wack the open holes left from misses with a ballpeen hamner, or butt of the knife as you showed, so the perforated edges dont require 3 freakin coats to make em vanish. However, my pro tip, humble as it is, Using a ryobi 18v 3/8 stapler to tack up Quarter bead. Learned it from working with a guy whos probably the fastest/tightest/ hanger, finisher I've met. Couple weeks ago we hung 2 rooms, two closets, a small hallway and partition, 38 sheets, to code, in 6 hours. Just him and I, and im definitely not a record beater in that field, but he showed me that trick. Staples grab the meat of the hung rock corners, and the ryobi staple gun adjusts easily to sink them in a little more so theres no need to sit there screwing off. I know somebodys probably like,' what about the bead crimper that affixes corner beads in place by pressing divets off the bead into the rock?' Well, in short, they fail over time. Getting bumped, knocked, or normal wear and tear over time will def separate the bond, so theyll be there, but split seams will eventually pop up behind them, and or loosening that will lead to a crack right behind the bead.
I am hoping/requesting you guys do a show comparing all the new drywall screw guns, because I've noticed pretty much all the big name brands have put out newer models, with new features, From Makita and Milwaukee to Ridgid and Ryobi. ( Not sure if dewalts upgraded their gun to a newer model with push drive like the others), is the Milwaukee better than the makita? Is the ridgid official? Is the ryobi worth the 100 bucks for a homeowner/small project
Amazing Video! As a former GC and teacher I always tell my people be nice to the trade that follows you and ask questions on how you can set them up to make their job easier. The number one thing that I’m always on at newbie’s to do is keep your work area clean. It stops you from loosing tools in garbage and allows finishers a better/easier environment to their work in.
Man I’m 28 years old this year and have been doing construction for 12 plus years and you are still teaching me things. I appreciate you and your guys and your videos. Thanks for the hard work
Been a finisher for 25 yrs. Chip and fill is definitely important. I prefer stainless knives, they last longer and don't rust. Set screws with a screwdriver, doesn't screw up the paper or pop later. Also, a finisher coats rows of screws, not individuals and will pull the fill tight. Apparently Vince likes to sand... 😜
As a former finisher, another tip when it comes to ones knives is I’d tell all newcomers to make a mark in the handle and this mark ALWAYS faces the wall. Ensures a proper break in which can take a while depending on size of and material the blade is made from. Always hated breaking in a new knife, lol. Another fun video, Vince. Appreciate you all. Stay safe.
Agreed, Jason. At some point one can just tell by feel of blade on wall or looking at blade but the mark was how I was taught when I first started. It’s a tried and true method. I steered clear of the stainless blades. Plain old high carbon steel in my “6 and down (I hardly used a 6” preferring a 5 and sometimes 4”) and I used the blue steel on 8”s and above. End of day, wash with brush and water in 5 gallon bucket, spray them with Wd and let em air dry over night. They lasted a long, long time. Much luck in your endeavors. Stay safe
All the people saying the video should have been 2-3 minutes, I think the video was a bit long but he explains a lot which I managed to follow. As a carpentry apprentice watching these videos is really helpful to me, no matter the length. If it suit you it suits you, if it doesn’t, it doesn’t. Great video man!
I'm a commercial Carpenter. Some of our finishers put a couple drops of Dawn dish soap in the mud before they mix it up. They say it helps reduce the little bubbles and makes for a smoother finish.
Superdan187211, we do that with mortar as well, the soap acts as a plasticiser. Makes the mixture more workable and due the water retaining properties, less likely to hair line crack upon drying. Great videos, just rang the bell.
clear dish soap is old school but its used because they have a hard time getting there consistency right if your using boxes ect it helps too but bubbles come from your mixture and moving to fast slow it down
thank-you, after 3 generations of passing down knives, finally bought myself an entire set of Hyde flexible stainless steel 1-12" and cant be any happier. appreciate the tip, learned this one early on when finishing and not being able to find a hammer around, using the rear of the knife and splitting it in 2 using the cheap rubber or plastic handle, NOT full tang ones.. whole world of a difference
I feel like I was getting yelled at the whole time by my angry uncle while making some updates at his place. This is the sort of instruction I respond well to. Thank you.
Where I’m from they call em “paisa tricks” and I don’t mind em at all. If it gets the job done and the final outcome is cherry then I’m all for it. Again thanks Vince!
Hey Vince. I worked as a metal stud framer and sheet rocker for a bit. We had a name for guys like you. Miracle workers. They would come behind an apprentice and make them look like pros. Thanks for sharing.
Doing mostly remodeling and repairs now, l tape my own patches and small rooms but l am not going to break any speed records so bigger things l sub, one guy put dishwashing soap in the mud and man he got a hell of a finish. I would eyeball the work now l will use your method, you can always learn, thanks boss.
Wow great tips, 68;yrs old , bored drywalling a 30x12 ft room in my garage I made. Will use those tips, already did the screws being out.. a few lol. First coat was actually va thumbs up from my buddy who drywalled a few yrs
I carry a T handle phillips bit tipped screwdriver. Faster to fix those protruding screws with about a 1/4 turn than fumbling with drill. No breaking paper from going too deep. Also found the Rigid 'strip' screw gun was best investment i made. Guaranteed for life. Tip: Order bits through customer service at Home Depot and they are much cheaper than buying off shelf.
This is a great tip, I hate how the back of the handle gets all gouged from screws and nails. I just want it to look like new, it takes at least two hour to clean all my tools but they still don't look new, just refurbished, and poorly at that because of the large amount of effort that goes into cleanup and me getting numb hands. I'll try and apply this next time I'm doing drywall work (which is constantly, Im never happy with my house and just keep making new walls and tearing down existing ones)
As a thirty-year home improvement contractor, I must admit I was yelling at the monitor. Pretty much like you called it, but finished watching out of curiosity and by the end, I agree with you. This is for people to learn from. Great tips and I love your everyman kind of style. I will be looking at all of your videos soon just to find any tricks I don't know already, I am sure there are many. Keep up the great work, ignore the negative crap and keep helping those who need it most.
Love the video! I am one of those drywall finishers/repairsmen that knew this stuff, but excellent guide for those who don't know this stuff. I live in a very DIY'er area and may pass the video on to people. I use some Kraft brand stainless steel taping knives not found at Home Depot / Lowe's. The tool is just one solid piece of metal, no separation between the handle and blade. The knives don't rust or corrode and clean up is a breeze. 👍
Philly finishers in the house. Prep is cheatcode to finish work. Dont be lazy and you'll be respected for your finish work. Vinny! Killed it again brother
Following a McDonald’s sausage and biscuit breakfast (to coax me out of bed at 4am), my dad would drive 12yo me down in his old, dusty Blazer to the job site on some weekends when he needed to work. I would spot nails and run corners for him. I learned exactly these things by watching him. Didn’t use a screw gun, just a good quality knife with brass-end handle. When I saw the knives in this video, I immediately knew what this was going to be about. Didn’t really realize those were some real pro tips until now. Thanks dad LOL
I want a Vince University where every instructor has this level barely controlled anger/energy/enthusiasm as they teach the next generation of humans how to navigate life. The new Spartans baby!
"YOUR TOO GOOD"! YOUR ADVICE WILL DEFINATLY SAVE ALOT OF PEOPLE'S TIME YOU GOT A GREAT WAY OF DEMONSTRATION AND KEEPING OUR ATTENTION THANKS AND KEEP MAKIN YOUR VIDS
As a 30 yr finisher that has spent countless hours screaming at my phone, at other drywall "how to" videos...this is great advice!...great video, kudos sir!, For actually knowing what you are talking about!...listen up kids
I've seen the guys do this on jobs for 23+ years as an HVAC man and never really thought about it. Interesting to hear this kind of stuff I've only had to do a small amount of finishing for duct penetrations and whatnot. It takes some skill to make it look decent.
Very helpful... I didn't even know about the blunt handled knife. I was always using the butt of my utility knife to press/twist the paper tassels back into the hole. And I always wash my tray and knife often to prevent dried bits from making my life miserable.
I didn't learn anything that I didn't know but that's not what your video was about I appreciate your uploads and yes let's ring that Bell for freedom in 2020
Another tip, if you haven't discovered it already, is to slightly sand the sharp corner edges of the blade so that when you're applying pressure you don't accidentally scrape and mar the surface paper, or leave sharp scrape marks in your mud. I worked with some drywallers too and learned some tips from them, including this one. My own tip, if you should find yourself without a decent knife like if you're pre-prepping and your stuff is in the truck and you don't want to do the walk up and down the stairs just yet lol, a sturdy plastic screwdriver handle works nicely too.
For residential jobs, three things work best for me: 1) tapered blade, Richard, 2) fill and scrape instead of sanding and 3) use only taping mud for finishing, as finishing mud works great but leaves a soft base for paint which dents and chips easy. Last thing I want is an unhappy client, so the finished job should look great for years, not months.
@@nspetlover I have used various types and it seems each pre-mix box has different consistencies, so I will change brands if I can. I rather get stiffer mud and thin it, than get wetter mud, which one would have to add powder to thicken.
I wish I saw this yes ago before I had to figure it out on my own. And that was like the best idea ever.jejejeje I was showing it off to my coworkers like I was the man..non knew this neither...thanks for sharing..
You’re killing me smalls! Quit showing all of my tricks of the trade! I’m gonna lose business. LOL But seriously...Great video. I’m a finisher with 25 years experience. It’s a family trade from way back in 1900. You were pretty right on...except for one thing. Please don’t call it Spackle. Painters use spackle. We use mud. 😁
Thank you for this, I’m in the investigative process of purchasing drywall knives. There is so much out there and a simple thing like missing the steel end of the bud of the knife is something I would’ve totally missed and not considered if not for your video thank you.
You are one cool Cat! Apprentices will not fall a sleep the way you teach or coach whatever way you want to call it. Your keeping there eyes on the PRIZE, way to go. Great video
Good job brother, I finished drywall every single day for years and I do know this but I still clicked the video to try and learn something new. You are well spoken and offering solid advice
When I’m first coating my screws I’ll carry around a screwdriver to get the clickers. Some tapers smash them in but then it takes away the hold from that screw.
Exactly. It ruins the paper and crumbles the drywall. The hammer end of some knives is for use on drywall ring nails, not screws. And this video is actually a good illustration of why a person should NOT hammer screws. It took him about 8 hard whacks to get the screw embedded deep enough, when one turn of a screwdriver would have done it better and quietly.
@@northpolltv6598 the screw wasn't in the stud so turning it wouldn't do anything you have to get it out or hammer in. Most guy don't waste time trying to unscrew it so they just hammer it. It's quantity not quality anymore.
Good tip Vince. See, I learned something new today. Now I have to run out to the garage and see what kind of mud knife I have. Thanks for sharing your secret sauce.
Work at an apartment complex, and do drywall repairs sometimes. Always kept trying to re sink them in, or sometimes had to leave as is . This is very helpful thank you. 🤯
Hey Vince, Im not a pro at anything, but pretty dam good at everything !..your vids are great and i watch them frequently for your up to date advice/tips and tricks of the trades... Keep up the kool vids man !
Thanks man. Updating my house while Corona has brought this great country to a halt. I suck at drywall. I own the wrong tool. I'm starting the tape job over and I'm using your tips.
I’m 1 year into finishing and have already contacted a level 5 finish.....if you can color inside the lines you can run bands ....cool video dude you got my sub!!
Great little pointers for the weekend warriors that take on their own messes, and aren't sure of the what's and the why's!!! Yeah maybe it was a bit long of a video to some but he explains everything he has done and is doing and that's what some people need to muster up the courage to drywall & plaster!!! I know for myself the first couple times I tackled bigger projects I was nervous that I'd make a bigger mess, so having him detail everything will help more than hinder!!! Thanks for the video my friend...keep up the good work!!
This dude is so long winded. He takes 20 min to give 30 seconds of info. Drives me nuts. I always want to watch his videos but jesus I wish he would get to the point.
@@andjunglepunkthirteen760 what's that got to do with learning proper communication skills, if you expect to teach others. arrogant "yeeah, dat's jus d' way ah m" attitude don't cut it if you can't be taught.
Man!! Way to go. Thank you for opening my eyes. I'm a DIY'er not a professional by any means. I always thought that the steel rounded end in the spackling knife was to protect the tool when falling and to making look fancy 😁😁😳😳, You got a loyal subscriber and follower. Saludos 🧨
Thanks Vince! Learned something new after all these years! My middle brother was a construction contractor & he recruited me to help ripout his 1920s old lathe plaster walls and hanging new drywall back in the late 70s -- stairways & ceilings were the "fun" part for me (I jest). He's 5'11" and I'm 6'2" so essentially a full military press/sometimes one-handed and on tiptoes for me and my brother on the ladder (smart guy). Thanks for sharing!
On my best day hanging Rock on a Job in MANHATTAN I installed 108 4X12 5/8 boards in 8 hours it was one big wall 35 ft high double layer 5/8. I taped it too ,it's documented somewhere on You Tube Again a excellent instructional Video Great job 👍👍👍
Thanks Vince. Not only was it informative but as I come from a dramatic Philly family, listening to you was like listening to my Uncle Tom or Cousin Bert! Thanks and God Bless. Now go say a Rosary and drink a beer!!!
Lol what? I only subscribed because of his personality. Plus there's the awesome production value of diy videos that aren't filmed portrait on a flip phone.
Great video, Vince!!!! This coming from a 30 year veteran of finishing drywall. Pre-filling gaps in seams ahead of time IS crucial. Critique? 2 of them (you knew it was coming) 1. Instead of "dry" running over screws, i always had the mud going. Find a flaw? Correct it while mudding using the techniques demonstrated here. 2. Remove that god-awful sticker from the side of that mud pan!!! LOL! Hyde, I've found, have the best 6" knives with the slightly rounded BRASS-headed handle. Steel can gouge and form edges that could cut the user. Just a heads up to those ppl who may be rushing out to get a finishing knife with any metal-tipped handle. Thanks for the video and God bless! 😁
Thanks me again!!
You da man @me again
Same way I've come to do my muddin'.
Also any major gaps like the one showed at the beginning, or any outrageous corners get filled and or skimmed before laying the tape and corners. Makes for a quick and painless tape job. 👍 and VCG you're a beast!
@@MostlyPeacefulCombatVet A brass- headed handle is also great for circling/marking flaws in the dried mud work. You probably already know that, though. 🍺
@@meagain6028 for sure. But not everyone does so it's great to have the pro's of the very cool gang sharing info such as that! Everyone appreciates that! 👍👍
@@MostlyPeacefulCombatVet have any recommendation buying brass knife link?
Hey Vince! Ryobi guy here again reppin green team. I hang/finish drywall 8 days a week, use the new brushless makita drywall screw gun with the push drive feature, and a makita impact driver to remove any misses or get in to corners / angles that the countersink collar on the screw gun can not get into all the way. Always wack the open holes left from misses with a ballpeen hamner, or butt of the knife as you showed, so the perforated edges dont require 3 freakin coats to make em vanish. However, my pro tip, humble as it is, Using a ryobi 18v 3/8 stapler to tack up Quarter bead. Learned it from working with a guy whos probably the fastest/tightest/ hanger, finisher I've met. Couple weeks ago we hung 2 rooms, two closets, a small hallway and partition, 38 sheets, to code, in 6 hours. Just him and I, and im definitely not a record beater in that field, but he showed me that trick. Staples grab the meat of the hung rock corners, and the ryobi staple gun adjusts easily to sink them in a little more so theres no need to sit there screwing off. I know somebodys probably like,' what about the bead crimper that affixes corner beads in place by pressing divets off the bead into the rock?' Well, in short, they fail over time. Getting bumped, knocked, or normal wear and tear over time will def separate the bond, so theyll be there, but split seams will eventually pop up behind them, and or loosening that will lead to a crack right behind the bead.
I am hoping/requesting you guys do a show comparing all the new drywall screw guns, because I've noticed pretty much all the big name brands have put out newer models, with new features, From Makita and Milwaukee to Ridgid and Ryobi. ( Not sure if dewalts upgraded their gun to a newer model with push drive like the others), is the Milwaukee better than the makita? Is the ridgid official? Is the ryobi worth the 100 bucks for a homeowner/small project
I'm a master residential and commercial Carpenter 35 years experience , You did a excellent job on this video concise, instructional to anyone 👍👍👍
Thanks Paul, we appreciate it!
Amazing Video!
As a former GC and teacher I always tell my people be nice to the trade that follows you and ask questions on how you can set them up to make their job easier.
The number one thing that I’m always on at newbie’s to do is keep your work area clean. It stops you from loosing tools in garbage and allows finishers a better/easier environment to their work in.
I did drywall for more than 40 years. I appreciate your video.
Man I’m 28 years old this year and have been doing construction for 12 plus years and you are still teaching me things. I appreciate you and your guys and your videos. Thanks for the hard work
Been a finisher for 25 yrs. Chip and fill is definitely important. I prefer stainless knives, they last longer and don't rust. Set screws with a screwdriver, doesn't screw up the paper or pop later. Also, a finisher coats rows of screws, not individuals and will pull the fill tight. Apparently Vince likes to sand... 😜
As a former finisher, another tip when it comes to ones knives is I’d tell all newcomers to make a mark in the handle and this mark ALWAYS faces the wall. Ensures a proper break in which can take a while depending on size of and material the blade is made from. Always hated breaking in a new knife, lol. Another fun video, Vince. Appreciate you all. Stay safe.
Thank Tim we appreciate the feedback!!
Not a fan of the S blade lol Good idea. I must look at my knife 50 time a day to 9 sure I'm holding them right
Agreed, Jason. At some point one can just tell by feel of blade on wall or looking at blade but the mark was how I was taught when I first started. It’s a tried and true method. I steered clear of the stainless blades. Plain old high carbon steel in my “6 and down (I hardly used a 6” preferring a 5 and sometimes 4”) and I used the blue steel on 8”s and above. End of day, wash with brush and water in 5 gallon bucket, spray them with Wd and let em air dry over night. They lasted a long, long time. Much luck in your endeavors. Stay safe
Yep, that's a good tip, I always mark the handle and use only side for better break in, and never use stainless knifes are to stiff.
I sand new knives edges. Not too hard, just enough to take the burrs out and any imperfection on the edges
All the people saying the video should have been 2-3 minutes, I think the video was a bit long but he explains a lot which I managed to follow. As a carpentry apprentice watching these videos is really helpful to me, no matter the length. If it suit you it suits you, if it doesn’t, it doesn’t.
Great video man!
Thanks Nik we appreciate it!
I'm a commercial Carpenter. Some of our finishers put a couple drops of Dawn dish soap in the mud before they mix it up. They say it helps reduce the little bubbles and makes for a smoother finish.
Never tried that, guess the guys around here didn’t want to share every secret!! 🤣🤣
Superdan187211, we do that with mortar as well, the soap acts as a plasticiser. Makes the mixture more workable and due the water retaining properties, less likely to hair line crack upon drying. Great videos, just rang the bell.
I've also seen liquid laundry detergent from time to time over the years
Real talk, I do this. Only downside I've found is that mud spoils alot faster. Just something to consider
clear dish soap is old school but its used because they have a hard time getting there consistency right if your using boxes ect it helps too but bubbles come from your mixture and moving to fast slow it down
thank-you, after 3 generations of passing down knives, finally bought myself an entire set of Hyde flexible stainless steel 1-12" and cant be any happier.
appreciate the tip, learned this one early on when finishing and not being able to find a hammer around, using the rear of the knife and splitting it in 2 using the cheap rubber or plastic handle, NOT full tang ones.. whole world of a difference
I feel like I was getting yelled at the whole time by my angry uncle while making some updates at his place. This is the sort of instruction I respond well to. Thank you.
You Had Me At Bigfoot Podcast
That good
Yeah, I was yelling back calling him a scab ! 😂🤣😂
And it helps that it's 1 minute of content in a 10 minute video.
I can relate
This is what you need!
Tips And Tools. Yes sir, I really like the direction you're taking this channel Vince-cent! Much love brother.
That hammering tip with the back end is awesome never tried that. Thanks Vince!
Thanks Michael!!
Where I’m from they call em “paisa tricks” and I don’t mind em at all. If it gets the job done and the final outcome is cherry then I’m all for it. Again thanks Vince!
Vince, always enjoy watching your videos!
Thanks Steve, we appreciate it! 👍🏻
Hey Vince. I worked as a metal stud framer and sheet rocker for a bit. We had a name for guys like you. Miracle workers. They would come behind an apprentice and make them look like pros. Thanks for sharing.
I appreciate you brother. Key west builder and finisher. Nothing but love my friend.
Thanks Steven, we appreciate it!
Doing mostly remodeling and repairs now, l tape my own patches and small rooms but l am not going to break any speed records so bigger things l sub, one guy put dishwashing soap in the mud and man he got a hell of a finish. I would eyeball the work now l will use your method, you can always learn, thanks boss.
I see guy use dish soap when they are using a banjo to tape.
@@jasonswoger410 Some of them are really talented, my famous line is l tape like a Carpenter.
Never use soap eventually you have to sand that mud and let me tell you soapy dust in the eyes is not worth the slick mud ...just my own experience.
not enough guys like you ... Pay it forward Well done !!
Thanks Mike we appreciate it!!
Love how you present your commentary. Makes me think of my time in the Military when being given a class.
yeah, similar style for sure
Wow great tips, 68;yrs old , bored drywalling a 30x12 ft room in my garage I made. Will use those tips, already did the screws being out.. a few lol. First coat was actually va thumbs up from my buddy who drywalled a few yrs
I carry a T handle phillips bit tipped screwdriver. Faster to fix those protruding screws with about a 1/4 turn than fumbling with drill. No breaking paper from going too deep. Also found the Rigid 'strip' screw gun was best investment i made. Guaranteed for life. Tip: Order bits through customer service at Home Depot and they are much cheaper than buying off shelf.
Solid tips we appreciate it Roger!
I could just bang them in with the handle faster than fiddling with a screw driver
I have the desire to do the work but not the skill or knowledge. This man gave that to me. Thank you sir.
I just use my forehead to wack in those high screws. Over the years you don’t really feel it anymore.
Oh snap! I've been hitting my head against a BRICK wall instead of drywall--No wonder the screws won't go in! Thanks for the tip
This is a great tip, I hate how the back of the handle gets all gouged from screws and nails. I just want it to look like new, it takes at least two hour to clean all my tools but they still don't look new, just refurbished, and poorly at that because of the large amount of effort that goes into cleanup and me getting numb hands. I'll try and apply this next time I'm doing drywall work (which is constantly, Im never happy with my house and just keep making new walls and tearing down existing ones)
I just hang my coat on them
lol
@karl haha you got that right
I hope this channel gets massive! It’s about time someone made videos about the trades that are worth watching! I dig it.
Thanks Brandon we appreciate it!
As a thirty-year home improvement contractor, I must admit I was yelling at the monitor. Pretty much like you called it, but finished watching out of curiosity and by the end, I agree with you. This is for people to learn from. Great tips and I love your everyman kind of style. I will be looking at all of your videos soon just to find any tricks I don't know already, I am sure there are many. Keep up the great work, ignore the negative crap and keep helping those who need it most.
Thanks Guitar we appreciate it, you aren’t much of a snob at all!! 🤣🤣
Awesome presentation. Love your delivery!
Content is great!
Love the video! I am one of those drywall finishers/repairsmen that knew this stuff, but excellent guide for those who don't know this stuff. I live in a very DIY'er area and may pass the video on to people. I use some Kraft brand stainless steel taping knives not found at Home Depot / Lowe's. The tool is just one solid piece of metal, no separation between the handle and blade. The knives don't rust or corrode and clean up is a breeze. 👍
Great choice in tool, I use the Kraft brand as well but solid stainless steel with the orange and black rubber grips
Philly finishers in the house. Prep is cheatcode to finish work. Dont be lazy and you'll be respected for your finish work. Vinny! Killed it again brother
Thanks Mike we appreciate it!!
This guy is like the WWE of drywall!
Following a McDonald’s sausage and biscuit breakfast (to coax me out of bed at 4am), my dad would drive 12yo me down in his old, dusty Blazer to the job site on some weekends when he needed to work. I would spot nails and run corners for him. I learned exactly these things by watching him. Didn’t use a screw gun, just a good quality knife with brass-end handle. When I saw the knives in this video, I immediately knew what this was going to be about. Didn’t really realize those were some real pro tips until now. Thanks dad LOL
I want a Vince University where every instructor has this level barely controlled anger/energy/enthusiasm as they teach the next generation of humans how to navigate life. The new Spartans baby!
🤣🤣👍🏻
"YOUR TOO GOOD"! YOUR ADVICE WILL DEFINATLY SAVE ALOT OF PEOPLE'S TIME
YOU GOT A GREAT WAY OF DEMONSTRATION AND KEEPING OUR ATTENTION
THANKS AND KEEP MAKIN YOUR VIDS
Thanks Kristine, glad you found the video helpful! 👍🏻
@@VCGConstruction
“Your welcome”.
As a 30 yr finisher that has spent countless hours screaming at my phone, at other drywall "how to" videos...this is great advice!...great video, kudos sir!, For actually knowing what you are talking about!...listen up kids
I like the delivery. It’s not boring. Thanks for the info.
Thanks Mark we appreciate it!
I've seen the guys do this on jobs for 23+ years as an HVAC man and never really thought about it. Interesting to hear this kind of stuff I've only had to do a small amount of finishing for duct penetrations and whatnot. It takes some skill to make it look decent.
As much as I don't like the 99% of people videos, this one is honestly one I now use almost every time I mud and I think of this video, so thanks bud
Thank you for taking the time to make this video. I learned a lot!
Thank you VCG CONSTRUCTION the way you teach is on point👍
Thanks Mr. !!
Great video, Thank you for your willingness to share with the rest of us
Thanks Matt we appreciate it!!
I’m a DIY and know nothing about drywall
This video really helped out and was very useful.thanks !!
Very helpful... I didn't even know about the blunt handled knife.
I was always using the butt of my utility knife to press/twist the paper tassels back into the hole.
And I always wash my tray and knife often to prevent dried bits from making my life miserable.
I figure if I watch enough of your videos I could build my own house start to finish! Love it!
Stay tuned!! Thank you Kenyon
For we DIY's that do this once a year, these tips are very useful/thanks.
Who would not like and appreciate this video? You helped me a lot. Thanks Vince and the Very Cool Gang
Thanks for the video Vince. Great “tip” about the end of the knife.
Thank you Casey!
I’m an auto body tech. I guessed about the hammer head end. But didn’t know what the proper use was. This is a great tip for us home owners.
Thanks for another great video Vince! I usually hate spackleing, I gotta try the secret sauce
Let me know how they work out!!
I didn't learn anything that I didn't know but that's not what your video was about I appreciate your uploads and yes let's ring that Bell for freedom in 2020
Another tip, if you haven't discovered it already, is to slightly sand the sharp corner edges of the blade so that when you're applying pressure you don't accidentally scrape and mar the surface paper, or leave sharp scrape marks in your mud. I worked with some drywallers too and learned some tips from them, including this one. My own tip, if you should find yourself without a decent knife like if you're pre-prepping and your stuff is in the truck and you don't want to do the walk up and down the stairs just yet lol, a sturdy plastic screwdriver handle works nicely too.
Awe man.. I thought sanding the tips was my trade secret. I guess I should have got that one copyrighted. 🤣🤣🤣
This video was made for me, today was my first day doing this drywall work, thanks 😊
For residential jobs, three things work best for me: 1) tapered blade, Richard, 2) fill and scrape instead of sanding and 3) use only taping mud for finishing, as finishing mud works great but leaves a soft base for paint which dents and chips easy. Last thing I want is an unhappy client, so the finished job should look great for years, not months.
what kind of taping mud do you recommend?
@@nspetlover I have used various types and it seems each pre-mix box has different consistencies, so I will change brands if I can. I rather get stiffer mud and thin it, than get wetter mud, which one would have to add powder to thicken.
Your attitude and disposition is very Philly. Much love. Thanks for the vids.
I wish I saw this yes ago before I had to figure it out on my own. And that was like the best idea ever.jejejeje I was showing it off to my coworkers like I was the man..non knew this neither...thanks for sharing..
Thanks Don we appreciate it!!
Me too, I had a hard time figuring it out alone, and now I find this video with even more things I didn't know
Keep doing what you’re doing! I benefit greatly from these videos!! You are appreciated!!!
Thanks George we appreciate it!
You’re killing me smalls! Quit showing all of my tricks of the trade! I’m gonna lose business. LOL But seriously...Great video. I’m a finisher with 25 years experience. It’s a family trade from way back in 1900. You were pretty right on...except for one thing. Please don’t call it Spackle. Painters use spackle. We use mud. 😁
👍🏻🤣 thanks Brian I appreciate it!
Thank you for this, I’m in the investigative process of purchasing drywall knives. There is so much out there and a simple thing like missing the steel end of the bud of the knife is something I would’ve totally missed and not considered if not for your video thank you.
Like watching Randy Macho Man Savage do a commentary on drywall....
😂 lol lol lol LOL LOL
He’s Itrowelian , he has to talk
Hahaha ohhh yeahhhhh!!!
😂🤣 ohhh yeahhh drywalling
FREAK OUT... Ronnie Garvin myyyyaaaaaaaaan... Oh yeeeeeahhh.. the prophet myaaaan... he done told me... oh yeeeeeeaaaahhh
OOOOOHHH YEAHHH!!!
You are one cool Cat! Apprentices will not fall a sleep the way you teach or coach whatever way you want to call it. Your keeping there eyes on the PRIZE, way to go. Great video
Durasoft stainless ,man 20 years ago I felt guilty buying them,but 20 years later I'm glad I did
Dustin Pomeroy best knifes in my opinion. Been using them 27 yrs. and a wallboard 6” stainless
Thanks Vince. Drywall repairs have always been my Achilles heel. I appreciate the video
This was like watching Sylvester Stallone do his first commercial, while in high school, while under the influence
Totally agree!
Coincidentally, I’ve found being under the influence of a few beers makes watching this guy much easier.
Yo, Sheetrock!
You’re the man, Vince!! Thank you for such great videos.
At first I was like "he doesn't know what I know" but then I was like "I didn't know that" great job
😂😂👍 Thank you!
Good job brother, I finished drywall every single day for years and I do know this but I still clicked the video to try and learn something new. You are well spoken and offering solid advice
When I’m first coating my screws I’ll carry around a screwdriver to get the clickers. Some tapers smash them in but then it takes away the hold from that screw.
That's the way!
Exactly. It ruins the paper and crumbles the drywall. The hammer end of some knives is for use on drywall ring nails, not screws. And this video is actually a good illustration of why a person should NOT hammer screws. It took him about 8 hard whacks to get the screw embedded deep enough, when one turn of a screwdriver would have done it better and quietly.
Technically if you RIP the top paper ( too deep) the hold is comprised. We would typically remove it and try again.
@@northpolltv6598 the screw wasn't in the stud so turning it wouldn't do anything you have to get it out or hammer in. Most guy don't waste time trying to unscrew it so they just hammer it. It's quantity not quality anymore.
I was at Home Depot recently and I was considering which knife to buy. Now I know!!! Thanks for a great video.
Good tip Vince. See, I learned something new today. Now I have to run out to the garage and see what kind of mud knife I have. Thanks for sharing your secret sauce.
Thanks William Logan!!
Work at an apartment complex, and do drywall repairs sometimes. Always kept trying to re sink them in, or sometimes had to leave as is . This is very helpful thank you. 🤯
Thank you so much..now I Will know things my son and boyfriend won’t know Cheers
Thank you for sharing your skills god bless your heart an take care
Hey Vince, Im not a pro at anything, but pretty dam good at everything !..your vids are great and i watch them frequently for your up to date advice/tips and tricks of the trades... Keep up the kool vids man !
Thanks Sean we appreciate it!
Thanks man. Updating my house while Corona has brought this great country to a halt. I suck at drywall. I own the wrong tool. I'm starting the tape job over and I'm using your tips.
You could cut it down to whatever you want, I need tips and tricks like yesterday!
I’m 1 year into finishing and have already contacted a level 5 finish.....if you can color inside the lines you can run bands ....cool video dude you got my sub!!
Thanks for putting this out on the internet.
I like this guy. He is entertaining and I learned something new.
Great little pointers for the weekend warriors that take on their own messes, and aren't sure of the what's and the why's!!!
Yeah maybe it was a bit long of a video to some but he explains everything he has done and is doing and that's what some people need to muster up the courage to drywall & plaster!!! I know for myself the first couple times I tackled bigger projects I was nervous that I'd make a bigger mess, so having him detail everything will help more than hinder!!! Thanks for the video my friend...keep up the good work!!
Weekend warriors or trades who need to do our own patches because we had to cut into the wall for a service or simple remodel.
Vince you are good man :: not just cus you know what you’re doing// also cus you share what you know 💪🏽
Thanks David, I appreciate that!
I know Drywall very well! I know so much about it, to know that I will call a drywall finisher to do it for me, cause that shit is an art form.
Yessir
Not really. Practice, and repetition makes perfect.
I'm a commercial electrician. We desecrate dry wallers work all the time and it's nice to see that someone is there to teach us how to correct it
🤣🤣👍🏻
This dude is so long winded. He takes 20 min to give 30 seconds of info. Drives me nuts. I always want to watch his videos but jesus I wish he would get to the point.
@@andjunglepunkthirteen760 what's that got to do
with learning proper communication skills,
if you expect to teach others.
arrogant
"yeeah, dat's jus d' way ah m"
attitude don't cut it if
you can't be taught.
Entertainment (and useable info!)... Gotta love it!
Great video, new to the channel today. Thank you for the tips!
Man!! Way to go. Thank you for opening my eyes. I'm a DIY'er not a professional by any means. I always thought that the steel rounded end in the spackling knife was to protect the tool when falling and to making look fancy 😁😁😳😳, You got a loyal subscriber and follower. Saludos 🧨
Thanks Rafael we appreciate it!!
Thanks Vince! Learned something new after all these years! My middle brother was a construction contractor & he recruited me to help ripout his 1920s old lathe plaster walls and hanging new drywall back in the late 70s -- stairways & ceilings were the "fun" part for me (I jest). He's 5'11" and I'm 6'2" so essentially a full military press/sometimes one-handed and on tiptoes for me and my brother on the ladder (smart guy). Thanks for sharing!
Thank you Andrew!
What tunes did you listen to whilst working??
Perfect example of why I hate most contractors: they’re better at yapping than working.
50 years in construction and I've noticed the same thing. I mean I don't hate them.
And yet you came here to yap about them instead of working
LMAO
Get to work you f****ng lazy white boys.
Being a contractor is being a salesman bud,that's why he's able to hire people.
Tell me about it. As a superintendent , I have to deal with these knuckleheads who think they are God's gift to construction.
Drywalling my own house for the first time I found this very helpful
Carry a 5 in 1 for the dirty work. No use in dinging the edge of a stainless knife over a screw set.
On my best day hanging Rock on a Job in MANHATTAN I installed 108 4X12 5/8 boards in 8 hours it was one big wall 35 ft high double layer 5/8. I taped it too ,it's documented somewhere on You Tube Again a excellent instructional Video Great job 👍👍👍
Thanks Vince. Not only was it informative but as I come from a dramatic Philly family, listening to you was like listening to my Uncle Tom or Cousin Bert! Thanks and God Bless. Now go say a Rosary and drink a beer!!!
Glad to see a pro trying to help us weekend contractors haha
Drywall finishers are like the body men of construction👍🔧 all in the prep.
That’s right!!
Thanks! Just finished drywalling my shed, about to get into taping and muddling.
Marshal town equipment baby
I had to subscribe.
You are not just knowledge, you are the best teacher.
What's with all drills on the wall?
That's funny he said Union guys where fast ...but enjoyed the vid
Yep, we are.
cause they use all tape tech tools and dont give a shit lol
Union guys are almost always useless. Break them up so they aren't standing around huddled up with a coffee in their hand.
Thanks brother great tips stay safe
omg dude you are super cool.......spakleltastic
Great tips and tricks! Love the enthusiasm!
Thanks Benny we appreciate it!
Dial back the hype and noise and you’ll gain subscribers. My 02.
He has 77k subscribed...
Lol what? I only subscribed because of his personality. Plus there's the awesome production value of diy videos that aren't filmed portrait on a flip phone.
Not everyone can customize their personality for money. People are who they are, this guy is charismatic.
0.02?