Kenmore Washer Repair - How to replace the Shock Absorber
Вставка
- Опубліковано 22 сер 2016
- Need help replacing the Shock Absorber (Part wp8182703) in your Kemore Washer? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Fix Part Number: FIX11745030
OEM Part Number: wp8182703
Why you might need to replace the Shock Absorber:
1. Noisy
2. Shakes and Moves
What tools you need for this repair:
• Adjustable Wrench
• Small Flat Blade Screw Driver
• Socket and Ratchet
• 7mm Nut Driver
The information in this video is specific to Kenmore, Whirlpool, and KitchenAid. To find a shock absorber specific to your model, visit www.fix.com
Not what you’re looking for? For more washing machine repair help click here: www.fix.com/parts/appliance/w...
Where you can buy this part:
www.fix.com/parts/washer/kenm...
Connect With Us!
/ fixdotcom
/ fixdotcom
plus.google.com/+fixdotcom
/ fixdotcom
Visit our blog: www.fix.com/blog/
Don’t forget to comment below and subscribe to our channel! - Навчання та стиль
I wish Sears made the front panel easier to remove to clean the pump motor filter basket. Which should be done every so often, some of the newer model have a access door but I still love my washer 20 plus years old.
my front shocks just went bad and the machine vibrated violently off its concrete base on the floor! it was on its side when i raced down to the basement.. i bought my machine in 2005 at Sears and i guess i could buy an replacement but somehow i still love my Kenmore Elite.. it seems like such a solid machine!
Thank You Sir, u explained the process perfectly. $35 for new shock absorbers. Washer machine works perfectly now. U da man!!!
Thank you , shocks and door lock replaced , your instructions were perfect, again thank you
Huge help. Thanks!
Clear instructions. Thank you! I would recommend replacing all four at the same time (I am not a professional).
Absolutely
Thank you for the visual
I will be replacing the shocks on my mom’s 18 year old Kenmore Elite HE3t.
Awesome thank you
Thank you.
I have an he5t are they pretty much the same size for they shocks and where can I get them?
Can you access the two rear shocks once the front lower panel is removed? Thanks.
I was able to but lots of cussing and swearing…
Awesome video, thanks a ton, much easier than I thought. So, the next question is how do I tell which shock is bad of the four?
Replace them all if your washer is older like mine. 15 years. The from left was moving in the slot on the frame and making a lot of noise. I replaced it and the noise was gone but the vibration was still there. It needed all four.
You mention on the video to turn the mount "COUNTER" clockwise, but you actually turn the mount clockwise to remmove.
He does turn it counter clockwise to remove , pay attention closely... dee,dee,dee