hi fz, i got an idea or forging challenge, not sure you like it or not, which is SANMAI laminate steel plus PARTIAL HEAT TREATMENT (Differential heat treatment), 2 in 1, how about this?😊
Love your videos, love you knives too. So a request... how about a Bowie Knive made out of some of your metal scraps from your other projects. Run that material through your Wootz Steel process, let's see what you come up with. Should be very cool!
I am following you already for a long time and I must confess that I am deeply impressed with your work 😮, I am a hobby knife Maker and I would love to have the possibility to learn more from such Forge Master as You are. Best regards from Austria
Lovely work as always. I enjoy watching you make blades. If I may suggest somehting though, try to have that work rest as close as possibly to the grinding/sanding surface. Getting anything, including clothes or body parts pulled into the gap is not fun (ex metalworker-been there).
next time pull the knive and not push it against your hair at the sharpness test. the idea is not to cause you skin irritations, but to proof the blade perfectly sharp - so going with the direction of grow, and just sliding the knife over it, should get you some nice results and seperate good from truely great edges. the grinding sparks also have caused some slight tempering, so even if you fully hardened it threw (What Alloy? What Oil Temperature? Have you tested hardness?) the additional heat softened it again. Why dont grind it more preshaped, harden it than, and just take of a little bit material but with lesser pressure and rpm, and for best with a cooled system that can run wet?
Unaligned makers mark almost broke my heart... Handle material is G10 I guess.... They are practical, effective, but for me an eyesore for something as classic, as vintage as straight razor.
Nice piece. You are getting better. I prefer my razors to sit tighter in the scales and a slightly more modern look like Ralph austs. I would also show how you sharpen because most of us straight razor guys prefer a progression of stones like the naniwas ending with the 10k or 12k. Then linen leather combination. Other than these details I would love to own a razor in this type of steel. Thank you for making them.
Also your bevel looks perfect. Many modern razors haven’t figured this out and my hart steel blade needs three layers of electric tape to take an edge!
Всё чётко. Что можете сказать по поводу газового горна? (Ваше мнение). Кузнечю на древесном угле и всё раздумываю на счёт газового горна. Стоит или нет? Спасибо.
Soooo ... Crucible steel. Finally you jumped off that fake wootz train. If it stays like that, I will not only subscribe myself but also recommend your channel to others. Also i liked this video of yours, that was my first time doing so. Well done, also nice razor.
If you liked the video don't forget to give us a like and subscribe to the channel. Thank you all for watching this video.
hi fz, i got an idea or forging challenge, not sure you like it or not, which is SANMAI laminate steel plus PARTIAL HEAT TREATMENT (Differential heat treatment), 2 in 1, how about this?😊
موس حلاقة في غاية الجمال ولمتانة ولاناقة. شكرالك
Old school handwork.. respect!
Most Beautifull Video Great Skills #GreatProcess
Always refine work. It's amazing. 🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤🖤
Thanks
Beautiful work. The finish on that blade is incredible.
Дуже цікаво, захопливо, так тримати
Love your videos, love you knives too. So a request... how about a Bowie Knive made out of some of your metal scraps from your other projects. Run that material through your Wootz Steel process, let's see what you come up with. Should be very cool!
Всегда лайкаю не смотря на итог,ни разу не пожалел
Hey 👋 man how you doing bro nice!.job keep up the good work buddy 👍 blessings
Pretty video. Calm, relax, no music. Fine 🙌
Thanks
Hello mister beautifully made well done
Nicely done
Good job👍👍👍
Thanks
Гарна робота 🪒 Супер.
👍🤝💪
I love all of your content! Thanks for making my day
Incredible work as always
wow really sharp 😉😉
😉
Beautiful - Thank you
Would love to see a bowie knife in wootz steel, shaped something like the SOG Tech Bowie.
Tertemiz iş Usta. Tebrikler.👍👌👏👏🙌
Keren skali pisaw nya
Une belle réalisation artisanale. Magnifique, 👌
Thanks
Yay more wootz! :D
Шикарная бритва получилась!) Жаль,что мы ушли к станкам..👍
I am following you already for a long time and I must confess that I am deeply impressed with your work 😮, I am a hobby knife Maker and I would love to have the possibility to learn more from such Forge Master as You are.
Best regards from Austria
Thanks
Nice razor! When using the strap, don't turn the razor over the edge, turn it over the razor back, otherwise you may not get a perfect sharp razor.
Top mano ❤
Magnificent 🖖🍻😺
Thanks 👍
Good job 👏
Thanks
Шик блеск красота 👍👍👍
Love it dude. Inspired me to make one.
Thanks
Гарна робота!🔥 Дякую за цікаве відео!👍👍👍
🤝💪
A Jambiya knife made from that crucible damascus steel would be epic imo
What is your secret for to have a blue / Green lame ?
I love these colors ❤
🔥🔥🔥
👍
Wootz wootz. Qubeka ndoda. Kuhle kakhulu
I want it....I want it bad!
Etsy
Lovely work as always. I enjoy watching you make blades. If I may suggest somehting though, try to have that work rest as close as possibly to the grinding/sanding surface. Getting anything, including clothes or body parts pulled into the gap is not fun (ex metalworker-been there).
Another amazing piece! Slava Ukraini! 💛💙
Thanks
did you put any buffing compound on the leather? thats what you need to strop. plain leather doesnt do much.
next time pull the knive and not push it against your hair at the sharpness test. the idea is not to cause you skin irritations, but to proof the blade perfectly sharp - so going with the direction of grow, and just sliding the knife over it, should get you some nice results and seperate good from truely great edges. the grinding sparks also have caused some slight tempering, so even if you fully hardened it threw (What Alloy? What Oil Temperature? Have you tested hardness?) the additional heat softened it again. Why dont grind it more preshaped, harden it than, and just take of a little bit material but with lesser pressure and rpm, and for best with a cooled system that can run wet?
👍👍👍
see that visible Crystalline molecular grains structure right thee. awesome. none of that patturn weld crap people like to call damascus
Why not making the bevel and all other grindings before heat treatment when the steel was still softer?
Unaligned makers mark almost broke my heart... Handle material is G10 I guess.... They are practical, effective, but for me an eyesore for something as classic, as vintage as straight razor.
Nice piece. You are getting better. I prefer my razors to sit tighter in the scales and a slightly more modern look like Ralph austs. I would also show how you sharpen because most of us straight razor guys prefer a progression of stones like the naniwas ending with the 10k or 12k. Then linen leather combination. Other than these details I would love to own a razor in this type of steel. Thank you for making them.
Also your bevel looks perfect. Many modern razors haven’t figured this out and my hart steel blade needs three layers of electric tape to take an edge!
So this steel primarily has been turned and returned on itself?
This is why it’s a Damascus ready?
i am your subscriber from a long ago. Can your weapons be found in Bangladesh? Your knife is really sharp, i need one FZ.
Vaše videá by mali byť na lekársky predpis😀 krása
Всё чётко. Что можете сказать по поводу газового горна? (Ваше мнение). Кузнечю на древесном угле и всё раздумываю на счёт газового горна. Стоит или нет? Спасибо.
Yes 👍
Soooo ... Crucible steel. Finally you jumped off that fake wootz train. If it stays like that, I will not only subscribe myself but also recommend your channel to others.
Also i liked this video of yours, that was my first time doing so.
Well done, also nice razor.
Have you registered an account at Bilibili? I'm not sure if someone stole your video. I want to confirm
а как сталь варил видео есть?
на руке любой нож бреет. на лице не каждая бритва.
05/10/2023
Pembuatan CUKUR CUKUR paling tajam dari CRUCIBLE damascus STEEL
very very nice!
Thanks