Melting Gear Box To Make 100 Aluminum Ingots
Вставка
- Опубліковано 1 жов 2024
- Sorry for the windy pictures!!!!! Today I want to show how i kame most of my ingeots hope you lie the video :) Have a nice day out there ...
JOIN MY Notification Squad (ALUMINATION): CLICK THE BELL
A_SKEWED_VIEW_3D UA-cam channel :) / @askewedview3d
THIS ID WHERE I BUY MY SAND: www.ravstedhus...
ARHY (MUSIC) : / @arhymusic
SUPPORT AlumiTube: / alumitube
Subscribe: goo.gl/OJ62wm
INSTAGRAM: / alumitube
FACEBOOK: / alumitube-689085321278283
Other Casting Videos:
Casting a Bronze Dagger From The Game Skyrim (Mehrunes Razor) • Casting a Bronze Dagge...
Casting 2 Knifes From Destiny (Hunter Knife)
• Casting 2 Knifes From ...
Casting a Bronze Dagger From The Game Skyrim (Valdr's Lucky Dagger)
• Casting a Bronze Dagge...
Casting Aluminum Sword From Aluminum Scrap
• Casting Aluminum Sword...
Music:
Survey God - Emotions [NCN Release]
CHECK OUT: ARHYs Channel out he make some cool music :
/ @arhymusic
I had to watch this on mute
ahan awesome like always. ;) keep the good work up bro. we are with you.
dont need music to make interesting
A whole channel only about aluminum! Thats pretty cool!👍
This looks like a way I'd enjoy spending an afternoon!
Yesterday I picked up aluminum cans on my four mile walk for the first time --- I must have 300 or so. Stomped on them to reduce their volume, and finally used a tarp to carry them.
When I saw the pile of transmissions in the video, I said --- hmmm! Get out the sledgehammer! That proved to be a good judgment, apparently.
I enjoyed watching the video.
Did anybody else see that he put Scarp aluminum?
Yes
0:39 that's lot of damage
Would you be willing to share what you paid for the scrap?
During the last video I was thinking "he's gonna need a good supply of metal if he keeps making these big weapons." I guess this should last a little while : )
Its free ;) i get it from job but can by it at the junkyard for 3-4 USD kilo... :) There gear box is from a Suzuki Grand Vitara that i change.... A little while i hope Have some big ones coming up :)
Hey that looks like some nasty dirty aluminum. I am interested how pure it is inside if you could cut one in two and show the quality of the aluminum. You know , could someone machine a part from this stuff ?? No one uts open and shows the quality inside .
Надо было всего лишь диск для циркулярки купить по алюминию, а я всё кувалдой крошил...
Help me out here i love melting and stacking metal. Especially aluminum and copper but to the life of me why muffin pucks? They are one of the worse shapes to stack and store. Bricks are by far more convenient as they stack neatly and take up far less space. This allowing to store 2 to 3 times the weight in a smaller space.
Now i know where you get the aluminium for the videos
how did you calculate/ predict all of that?
I have done this alot ;)
413th viewed 60 liked and 12th commentor
Wow, been wondering how to do this. I’ve only have about 8 aluminum transmissions, looks like a lotta work!!!! Went to the junkyard the other day, and brought them one of my aluminum transmissions, he offered me seven dollars for it!!!! 😂😂😂😂 Luckily I have about 5-5 gallon bucket’s full of copper. Working on my 6th now. The great part is, summer is just begun, I’m guessing I won’t be bored this winter in Maine!!! Also have a 55 gallon drum half full of alternator’s.
So you all know, make some friends that own a garage!!! I’ve given three dollars per alternator, $10 per transmission, I pick up TVs, air conditioners, and microwaves when I see them, and I live in a pretty small town in Maine, every Sunday I go to the junkyard, and they’ll be all kinds of TVs and microwaves, Air conditioners, he sets them out back and I just take them home for free. 👍 hopefully this helps a few people that are thinking about doing this, from what I can see, there’s a lot of money in my yard right now.
Where the songtrack ( we are ) in the old video alumi ??
This would actually be zamack right? Die cast aluminum/zinc alloy.
good to see you growing this fast:)
Molten Science I love you 😄😄😄😄
Thanks Molten :)
Where did you find this transmission?
does it really matter
Can i mix cat food cans with soda cans, Or any other aluminum? Like will it contaminate it?
welcome to my channel, where safety is my number 3 priority...
Hey bud, I love pistons. Just the right size to fit my pot. That and I have a piece of 3/4 in plywood with a bunch of screws in it that lives on my cutting bench. I would be lost without it. Getting that gearbox is great my friend. They are a great source of quality stock.I am curious, , , Do you not use borax and soda ? I find it so cheap and really helps float the dirt etc. Your forge/furnace is standing up really well. Even that broken lid is still going strong.Way better than the muffin trays eh, LOL. This was fun, Thanks fella !
Why do people add music to these videos all the time? It's more obnoxious than not
Like nr. 18. PS mega fed video som altid! Keep up the good work
Mmmm try an 200$ flea bay plasma cutter
Do you know what grade of alluminium this are made from
Put a tarp under the wood to collect all the chips from the saw.
Is there a video you have uploaded that shows how you made your furnace, also what are you using for crucible?
Score yourself a five plastic five gallon bucket and fill it three quarters the way with water next time, that way when you're making muffins in bulk you can just knock them into it and leave them all there till you're done, then dump out the water and now you've got something to keep them in till you're ready to use them.
Este tío merese muchos likes así dadle like , saludos desde Chiapas
That's a horribly inefficient way to breakdown those parts, man. get a rosebud tip for a torch and cut those castings. The heat with crystallize the metal and it will break apart easily. You're wasting time, blades and all those aluminum chips. Not cracking on your technique, just offering a better solution.
Let me guess, 100$ of ingots.
60$ of propane .
Full day of labor 125$ (waist of time )
Total of 85$ in debts...
If you want some aluminium like this comment.
Whys part of the tray missing
Very awesome video!! I was wondering if you could make the Batman logo or the Robin "R" logo? (Tim Drake version if you could) I have the tattoo on my chest. Would be really cool to see 1 cast from aluminum!! Keep up the FANTASTIC work!!
I'm just always confused on these videos because most yards pay the same per pound weather it's an ingot or a raw clean case.
Even worse, yards near me won't but ingots for fear of them being "loaded" with steel centers.
Hello ! how are you? Great video! Can you making sword shikai of nozarashi kenpachi ( Bleach)? Please? Yes or no? Thank you.
sempre esperei um video assim
I got a forge so big you can melt the entire tranny in it, it leaves all the iron parts behind. I use scrap wood to fuel it and a blower motor. I melted sixty plus pounds yesterday with it. My scrap aluminum ingots about 30 of them weigh over 200 plus pounds. The last one weighed over 50 pounds bye itself
Did you build it is there any where o can see picture of it or do you have video on UA-cam of. You using it by chance?
@@fredordaz355 I'll describe it to you it's about four feet high, 3 feet in diameter, has 10" tube stainless for a fan motor that you just place inside it. It's primary use is to burn trash and wood products. I have thousands of mesquite trees here, trimming them is a constant battle. When this forge is going I melt like 40 pounds of scrap aluminum at a time. The walls are made of concrete, reinforced with wire/ rebar. The inside walls have to be redone like every 100 hours with a new coating of concrete/ wire. the heat has a negative affect on the structure. I can also burn off waste oils as needed. Nothing is left after the burn process. It is basically a Dakota fire hole on steroids ,
You need to use a cutting wax or soap on your blades to stop the aluminium from sticking to the blade when hot
After all that , What's it Worth ?
Is that a cup cake pan you used?
Nice. Can u do a remake of stormbreaker now that the movie shows it more clearly and detailed instead of the toys
Music ANNOYING
You showed me an efficient way of breaking your pieces down to size for melting!
Someone buy him an angle grinder! Ffs 🤦🏻♂️
My guess that is about 50 to 75 pounds of aluminum thats my guess but hey atleast its an old one so maby less
I have a challenge to make the water sword of the prince of persia warrior within
Are those just basic cooking pans or are they some kind of mold?
We used to do something similar to this years back with our junk yard...had an industrial smelter, would smash up the gear boxes and then pop them in and then it would pour out lovely ally into the ingots we had, could hardly keep up with the ingots...lol.
then scrap the other metals out as we went...would take the ally into the major shipping junk yards when it crossed a ton.
I like your doing melting to create a sword haha you have so many sword Todo joking
3:34 what's wrong with that hunk of aluminum? Is it contaminated or something?
When you melt metal and try to sell it what grade do they give you? is it not the lowest grade because they can no longer I D it?
Are we melt steel by waste oil burner without graphite crucible please tell me
@@israrali9318 It depends where you sell it. Most scrap yards do not have equipment to test the ingots. And will not take them. If they do you will get the lowest price. But if you find a smelter and you supply the same alloy and it is what he needs you may cut out the middle man and get a great price. The problem is once you melt it no one can tell the alloy with out testing and some require testing on every ingot. In that case the bigger the ingot the better so less testing is required. I was the owner of scrap business and wanted to make ingots to save on shipping but I would have lost money. It was worth more when they could see what it was.
Good video... but your kinda trash at pouring the aliminium... but good video tho
Me gustan mucho tus videos👌👌 y enserio me gustaria aprender a hacer replicas como las tuyas pero tengo una duda los moldes que utilizas ¿los fabricas tu o los compras?
2:30 Those shoes, off white?
Build doll alumunium
dich the muffin pans buy some real molds bar molds
I like the muffin pans!
35 views 5 likes youtube is mess-up today
AlphaFire 210 I love you 😄😄😄😄😄
Can you make the butterfly knife Doppler face 2 (csgo)
Niceee
Why not bust it up with the sledge without cutting and missing out on the shavings
my are live in indonesia
What the heo
Black panther mask
Video Is So Shaky
So eu br aki?
I can remember whey you had less than 10K subscrbers,now you have 166K
Hehe Yep people like what i do ;)
Can you dance in your next vid???please.....😂😂
Was not expecting that much slag from an alloy. That metal is 85% aluminum and the rest other metals, the other alloys are now slagged out. Maybe not the strongest now for casting, still cool though.
What are you talking about? Most of the slug is aluminium oxide and not "the other alloys". There are some steel parts he didn't remove like those positioning pins but they sink to the bottom.
I don’t know about that. The other alloys - silicon, copper, mag, nickle, iron, all have a higher or different melting point and end up as top slag or bottom weight. It’s why an aluminum piston or block does not melt upon high temps.
I think he has extracted the low melt aluminum and could have fluxed out some of the other low melt metals that are useless without the whole alloy being blended.
Just saying, what do you think?
I'm sorry dude but this is bullshit. Alloys are not a mechanical mixture they are solution so they can not be separated so easy. If it would be so steel and cast iron wouldn't be possible because melting temperature of carbon is more than twice higher than iron. There is even more - very often alloy melting temperature is significantly lower than all of its components and cast iron is the most common example of that. Deal with it%)
That’s the point, when you heat the mixture to the temp of the highest melting point of the mixture (iron) that is when the aluminum alloy is created, or in this case when that temp is not achieved you end up with slag and dump material. Get it now?
I'm interested in maybe taking this up myself. What kind of start-up cost would I be looking at?
Ala verga wey
日本人いる?
Great work. Pity it is the only channel that I have to turn the sound off to watch because of the crappy music.
Sorry ;)
izi shom bay gpld
You need to have website where we can buy them and do command
Nice intro
Can u make "Draven Axes" from League of Legends ???
Check your description bro you spelled like wrong
Is sooooo cooooool
Get a Cam hammer
Cutting that thing up looked like a pain in the ass.
Can you make 2mm sheets By just pouring it into a flat baking tray ? i buy 400mm x400mm x 2mm sheets for £9 but would like to make my own without having to wait for shipping..
Hello saw your comment i tryed that but it came out brittle for me and when i tryed to pour it out started to harden before i got it all poured.and also do not put water on it till it hardends some it will leave big holes in it.
@edwin parsons thanks for your time !..Im gonna go search the big industry process see how they get it so strong..🙂👍
First
Now sell it on EBay get ur money back
Runners, and nealing down ~ that could go so wrong!
I love ur vid... That's so amazing... And what you will make in next vid??
Love the video, hate the music
Shoot dagger pyka from League Of Lenends
Jesus, what a horribly imprecise way to cast.
AlumiTube can you mike blades of chaos
I forgot to comment I want to say can I have some I’m jealous
You should make the chaoseater from darksiders 1
Holy crap!! I want a transmission to melt!! :O
Hehe Good aluminum right there paul :)
Oxm
Legal
Do you live in England or did you get that circular saw from eBay mate?
Also you should have used a grinder, it would have been quicker and easier
Hello
Im Poland
subscribed ive been making my own recently out of my home made coal forge