How to wire a contactor and overload | Direct Online Starter by Earthbondhon
Вставка
- Опубліковано 22 сер 2024
- How to wire a contactor and overload | Direct Online Starter by Earthbondhon
Full Information: earthbondhon.c...
What is an overload contactor
A contactor is a large relay, usually used to switch current to an electric motor or another high-power load. Large electric motors can be protected from overcurrent damage through the use of overload heaters and overload contacts.
What are NO and NC In Contactor?
NO is normally open i.e. the contacts are normally open and close when the switch is actuated. NC is normally closed i.e. the contacts are normally closed and open when the switch is actuated. 1NO1NC is generally used to describe contractors (industrial power relays) and manual switches like emergency stop buttons.
Did you video miss it?
✔️single Phase 3 gang switch: • single phase 3 Gang sw...
✔️Single Phase Electric Kettle Connection: • Single Phase Electric ...
✔️Single Phase Full House IPS: • Single Phase Full Hous...
✔️SC DC Line Light Control Automatic : • AC DC Line Light Contr...
✔️single Phase 2 Float switch 2 water Tank: • single Phase 2 Float s...
✔️Single Phase ATS Connection: • Single Phase ATS Conn...
✔️single phase Automatic Water Pump off-on: • single phase Automatic...
✔️Single Phase To 3 Motor Connection: • Single Phase To 3 Moto...
✔️Three Phase Voltmeter Connection: • Three Phase Voltmeter ...
✔️Single phase Ampere Meter Connection: • Single phase Ampere Me...
✔️Basic of Induction Motor: • Basic of Induction Mot...
✔️How to DC Motor work: • How to DC Motor work |...
✔️How to Synchronous Motor work: • How to synchronous mot...
✔️Types of AC Motor: • Types of Electrics Mot...
✔️What is PLC,PLC Introduction: • What is PLC | PLC | P...
✔️What is Stepper Motor: • What is Stepper Motor ...
✔️Type transformer VS Oil Transformer: • Difference between dry...
✔️Type of Electric Motor: • Type of Special Motor ...
✔️Types of Transformer: • Types of Transformer |...
✔️Basic Construction of Transformer: • What is the basic prin...
---------------------------------------------------
Connect With Earth Bondhon:
📌Business E-mail: earthbondhonsms@gmail.com
📌Facebook: / earthbondhon.org
📌Twitter: / earthbondhon
📌Website: earthbondhon.com/
---------------------------------------------------
WARNING:
This video is for demonstration and educational purposes only. Each demonstration presents risks and hazards that must be fully understood before attempting. And should be performed only by professionals.
#motor #mcb #electrical
© "Earthbondhon" By Earth Bondhon
Thank you! I got my 10 HP 3 Phase dust collector wired up with the help of this video. We have start stop switches at 4 locations in my shop.
yes....
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Out of all the videos this is the only video that can actually make sense the people that have no idea what's going on these electrical schematics
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Nice video., I put it on a few times a day to help put my kids to sleep. They always fight taking naps. Now I just start your video and walk away. Thanks and I subscribed. I will sponsor your channel if you make more similar to this one. I will pass this along to other babysitters in town for them to try it with their kids. Cheers!
skype Id : earthbondhon_2
fb id : earthbondhon.org
add me
thanks friend. SHARE video .
subscribe my channel.........
Vidio yang sangat bagus untuk pembelajaran,saya dari Indonesia sangat menyukai vidio yang di upload terimakasih pak guru.
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Thanks for your sharing it with us. This is a great tutorial and very informative...
dl
You are so welcome!
Hi, i am eletrician, i live in Brazil, good video.
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
@@EarthBondhon ok
I suggest you never use a computerized voice emulator again.
Idk why these kind of videos always use this voice
Ever
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
It's actually funny.
Probably because he can't actually speak english, so he writes the script into google translate to english, then runs it through the emulator so that more people can benefit from the video?
good video .respect from Tajikistan
hey, live Bangladeshi.
thanks you
Very nice video...
I'm waiting you next video....
thank you
friends
Screw that voice but thanks for the refresher..
ok bro... thanks
Thank you for a great video.
I have a challenge on hand I would appreciate your assistance.
In resetting the the contactor from the overload state, must the machine be connected to mains power while the reset button is pressed and then the ON button pressed?
I am terrified of making a mistake and destroying the machine.
Many thanks in advance and once again for the training.
Try again
@@EarthBondhon Thank you.
I will - before the week runs out - and revert.
Thank you for these video. I have a problem connecting my then TR 610 top 2 so that I will be able to use two timers to control 4 solenoid valves. I will be very grateful for your help
I am using 2 contactor switches with them
star contactor control
FB id: earthbondhon.org
add me
get by new video soon............
If their is no earthing wire and what if i connect neutral wire to the earth and i use as a ground to the motor???
common sub GND.
add Facebook "earthbondhon"
I love to receive your comments and feedback.
Thanks for watching
Very good speech thanks to make video
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
thank you
Welcome!
Good vedeo for maintenant
Yes, thanks Love to receive your comments and feedback.
Thanks for watching it.
Good video ,and good understanding
thank you.
Also I might add that this is a very OLD school, and somewhat unlikely scenario that in industry you would have them run a neutral line to the 3 phase machine, sans, having a simple transformer. YES of course it can be done...... odd TODAY in practice. And i might add that most, and many industrial wiring applications you "quite likely" will not have access to a NEUTRAL out in the plant.
yes, sir
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Hello, Great Video. I t help’s me alot .Thanks.
You're welcome!
add me whatapp. full info website @earthbondhon. I love to receive your comments and feedback.
Thanks for watching it.
Good video. I learnt something
thanks
I m manipuri very nice
Thanks friend
fb id : earthbondhon.org
add me
get by new video soon............
ติดตามแล้วครับดีมากๆๆ
Love to receive your comments and feedback.
Thanks for watching it.
great subjects however the Digital audio voice is terrible.
Thanks, friend
FB id: earthbondhon.org
add me
get by new video soon............
มีประโยชมากครับ
I love to receive your comments and feedback.
Thanks for watching.
I like this video sir
Thanks For Watching video. fb id add me : earthbondhon
Thanks Great observe video channel
personal fb id : facebook add Fb/earthbondhon.org
skype Id : earthbondhon_2
thanks friend. SHARE video .
subscribe my channel.........
why do you have the wires coming off the same side of the switches? Don't you think people that do not know how to wire a basic starter will pair them together? I would if I did not know based on your animation.
Ms Power Point Software Using....
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
hello as it is called the software you use to design, greetings from Peru
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
great info please stop using computer voice as this made me shut it off after 2 min
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Very very nice job
Thanks friend
fb id : earthbondhon.org
add me
get by new video soon............
hello.....i have problem with my pump......the pressure drop too fast but there is no leaking......is it have any problem with the contactor?
thanks you
I have a question, I shall write in the comment box.
Will we also need to push buttons?
Thanks, friend
FB id: earthbondhon.org
add me
get by new video soon............
good day sir, can you show me how to connect a single-phase motor in reverse and forward using a magnetic contactor
yes,
youtube channel
full info website @earthbondhon. I love to receive your comments and feedback.
Thanks for watching it
very nice... thank you sir
thanks you
Good information
thanks
Thanks for sharing
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
شرح جميل best work
personal fb id : facebook add Fb/earthbondhon.org
skype Id : earthbondhon_2
thanks friend. SHARE video .
subscribe my channel.........
Earth Bondhon iraq boys wellcom to you
Very good
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Need to use Standard for U.S. N.E.C.
Good content but the presentation is quite boring (slow).
personal fb id : facebook add Fb/earthbondhon.org
skype Id : earthbondhon_2
thanks friend. SHARE video .
subscribe my channel.........
Why? Its straight to the point. I rather this than a stupid big introduction and a whole off-topic story.
Full hose incoming epdi edukurathunu vedios podunga
thanks . .....
Can you explain what is the mechanism of transformer
yes Thanks friend
fb id : earthbondhon.org
add me
get by new video soon............
Where is the transformer for the push buttons?
thanks you
slow video very nice
thanks you
adjust speed of the video to 1.5
Thanks friend
fb id : earthbondhon.org
add me
get by new video soon............
Where's the control transformer?
No...sir.... Motor control...
Electrical and Electronic video please recommend us in the comment section. Be stay with us and learn Electrical and Electronics easily. Check our playlist for different types of videos.
thanks...
How can i synchronise two electrical generaytors
yes,
thanks
The control supply is 1Ph [L&N]. Sometimes the control supply is connected between L1 & L2 or L3, could you kindly explain
all Right...
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
thanks
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
Good!
thanks
How can three different motors be controlled by single switch system ?
thanks
Home electrical wiring vedios podunga
thanks sir, info.....
nise videao
Thanks For Watching video.
please you subscribe my channel..............
it very good
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
neutral is blue in PUIL recomendation
FB id: earthbondhon.org
add me
get by new video soon............
I wired a machine up like this years ago, it was something I designed, I got yelled at by my fellow engineers for a month over it. (I never did it again.)
thanks you
sir
Stephen Hawking would probably be more intelligible thank this narrator.
Thanks friend
fb id : earthbondhon.org
add me
get by new video soon............
nice
Bro.........
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
What country is this for? Your title should say U k
bangladeshi
thanks you
And speak to all controlling no and nc, A1,A2
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
dude, what's with the audio?
yes.....sir...check to video. new upload audio...
Sir..
Atv 312 showing " nst"
personal fb id : facebook add Fb/earthbondhon.org
skype Id : earthbondhon_2thanks friend. SHARE video .
subscribe my channel.........
9ic one
full info website @earthbondhon. I love to receive your comments and feedback.
Thanks for watching it
if you put the speed at 0.75 it is like your drunk friend going to talk to the "hottest" girl in the party... The speed at 1.25 is okay to watch the video
no friend
How does auto circuit work ?
yes, sir
thanks you
Can you show video for me?
yes
@@tayoa1368 Hello I am contractor from KSA All control panel working here
Sir.
Emergency button “ No & Nc “ Nc working but No not working
FB id: earthbondhon.org
add me
get by new video soon............
Where is the ground wire ?
3 phase motor . ground not a new .
Earth Bondhon I don t understand , not a new ?
Separate cpc only for motor
Ok
Bro...........
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
video, does not save.. but why.?
thanks sir
whats wrong with your voice dude
Not sure what voltage you are powering that motor with.in the USA its it's brown, orange, yellow for 480. Or black, red, blue,for 208
Yes, Sir
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Pls 3phase motor connection and diagram and botton .auto off manual and indication lamb
yes,
thanks friends
hi, the schematic diagram missing ....
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
I just noticed
There is too much people asking for people to subscribe their channel even if you don't know what content they have lol xd i mean even you dont want they ask you to sub your channel like the video turn on notifications lol (not hating)
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
ggod one
I love to receive your comments and feedback.
Thanks for watching.
nic
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Sir ak or no and nc lga ke samjao
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
cant understand for beginners...
thanks you
Teaching talk is slow please
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
1,hp who many valu?
3 phase motor Thanks, friend
FB id: earthbondhon.org
add me
following
Thanks friend
fb id : earthbondhon.org
add me
SHARE video . subscribe my channel.........
Sp means
facebook id : facebook.com/jonykta3
add me
single pole
just talk like normal people please. robo narrator is so annoying!!!
thank you
Very slow
Bro...............
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Plg speak to hindi
Thanks, friend
FB id: earthbondhon.org
add me
get by new video soon............
R
thanks
only telugu news not interested other languages
Nobody gives a f### to ur interest...
Thanks for your feedback, please follow.........
"Thanks for watching the video" You are very welcome!
Man this stupid Microsoft Sam voice
yes, sir
robot voice FAIL
sorry sir .
full info website @earthbondhon. I love to receive your comments and feedback.
Thanks for watching it
Horrible ai voice
Thanks....
I understand how to install overload, but your explanation is very confusing, especially your drawing. Very difficult for ordinary people to understand
why......
love to receive your comments and feedback.
Thanks for watching it.