I've seen hundreds of these videos, this is by far the one that I understood the best, because you explained on paper then showed an actual example. Great explanation. Thank you.
so many videos out there purport to "teach" people to connect to a motor starting contactor yet fail to teach an understanding of the process so that people cannot diagnose when there is an issue. you on the other hand explained just how the circuit latches to remain on so that people actually learn something. Very well done sir
that really cleared some things up for me. i paused the video and studied the wiring. im an electrician but its rare for me to wire a contactor and control wiring so i like to refresh my memory before hand. thanks.
You have given me the best explanation on this, but can you remake this video and add two indicators to it, one when the contactor is energized and the other when it is not. Also includes emergency Push button.
👍 Thanks a lot for your Vidio I am as a biginner can easily understood what you have submitted in simple methode, hoping you doing more vidios may God bless you n your family !
Great video! Do you happen to have a video that demonstrates the stop/start functionality where the coil (24V) is a different voltage than the line voltage?
Such a good video! Like other people said, explaining it on paper and then demonstrating was so helpful. I’ve watched other videos, but I didn’t get it until I watched yours!
What would happen if I used a standard ON-OFF toggle switch on this self-holding circuit? Would that be safe? I am trying to replace my coffee machine momentary switch with a toggle switch. The coffee machine has a self-holding circuit. Thank you
Like every one else, thank you so much for explaining this in very simple terms a knucklehead like me can understand. I am building a new control panel for a milling machine and I had everything worked out except for how to use momentary switches for the contactor. I want to use a contactor for safety as I didn’t want the mill to be able to restart on its own if there was a power interruption. Problem solved thanks to you. Cheers Stuart 🇦🇺
Good Job.. 25 years ago this was the part that took a few days to know how. Rest of the wiring is common sense. Also You May explain to these rookies about the Neutral conductor going through the OL contacts. Thanks Sir.
I have been looking on the Internet for ages to understand how to wire up stop start in this way. Thank you for such an excellent presentation. I get it now!
Hello sir, how r u doing? You are doing a great job of teaching the people... but my suggestion is that you should organize a board which you can be writing some diagrams (projects)
you probably dont give a shit but does someone know of a method to log back into an Instagram account?? I stupidly forgot my password. I would love any tricks you can offer me!
@Immanuel Brysen i really appreciate your reply. I found the site through google and I'm trying it out now. Seems to take a while so I will reply here later with my results.
Good day sir, I really appreciate the good wor you're doing, I have a question, the red wire is supposedly the life wire (24v), but you passed it through the stop button first and looped to the green button, which means the green button got it's supply by looping from the red button, does it mean the red button is continuous even though it's not pushed ??
Thanks for the video it teaches thanks! I work in industry and this is a very necessary thing, but in the video at minute 6:30 I could not understand why you connected A1 to L1?
Thanks for watching...........ua-cam.com/video/nRU_feyTPso/v-deo.html this video is manly on star delta starter but still shows how to connect an overload relay.
thanks that was perfect I under stand now.. now only if you could ad an overload protection to that with an e-stop. added that would be awesome . im not sure what it is but the way you did the video it makes it plane and simple and easy to under stand. ill have to look maybe you already have a video of this.
Thanks for watching and appreciating..ua-cam.com/video/lfcXpTplTZM/v-deo.html this will show how integrated an overload to the contactor in DOL starter circuit. it also has another part here ua-cam.com/video/-9mV3XOZ2HA/v-deo.html... I will make one in feature adding Emergency stop.
Quite good, but I must say I would like to see you connecting it, to the motor, or whatever you want to use that system for. Actually, I was thinking of using it with a bench-saw, my normal switch has broken, so I was thinking of making a kind of control box, and I thought I could put an Emergency button, and the on/off buttons, and the contactor would be for extra caution. Well, thank you for your help and I hope you make a video, showing how to connect the power to the machine. 👍👌
I've seen hundreds of these videos, this is by far the one that I understood the best, because you explained on paper then showed an actual example. Great explanation. Thank you.
Your welcome and thanks for watching.
Me too thank u so much sir
I'm here again @@electreca1
so many videos out there purport to "teach" people to connect to a motor starting contactor yet fail to teach an understanding of the process so that people cannot diagnose when there is an issue.
you on the other hand explained just how the circuit latches to remain on so that people actually learn something. Very well done sir
Your explanation by the diagram and practical demonstration is SUPER easy to understand. A perfect teacher.
Thank you!
that really cleared some things up for me. i paused the video and studied the wiring. im an electrician but its rare for me to wire a contactor and control wiring so i like to refresh my memory before hand. thanks.
i found your video really informative, bc you show how it works IRL, unlike those complicated theoretical diagrams
Exactly
Thank you very much for the break down of the NO / NO maintains the coil. I am getting it.
Very Simple, Step by Step, To the Point, Precise, Accurate presentation.
Thanks for your time
You have given me the best explanation on this, but can you remake this video and add two indicators to it, one when the contactor is energized and the other when it is not. Also includes emergency Push button.
Your a good teacher unfortunately I have just seen this I wish I saw it wen I was in school plizz upload more am going for an interview
Let me pray for you bro anyway I wish you success 🙏🙏🙏
Let me pray for you bro anyway I wish you success 🙏🙏🙏
Where are you located now ? Are you in Uganda
This is a very good job. Thank you so much for sharing your knowledge. The start-stop logic is the most fundamental circuit in Electrical engineering
Great tutorial. You made seemingly difficult connections very simple with easy to follow steps and stages of connection. Thanks
👍 Thanks a lot for your Vidio I am as a biginner can easily understood what you have submitted in simple methode, hoping you doing more vidios may God bless you n your family !
Excellent video on this topic.
thank you so much !!!! i did this today , but now thanks to you i understand perfectly !!! wish you all the best!!!
Great video! Do you happen to have a video that demonstrates the stop/start functionality where the coil (24V) is a different voltage than the line voltage?
Brilliant explanation of how it works. Thanks man
Thanks for watching
Good
Have struggled with this concept, but you broke it down perfectly and simplistically. Thank you!!
Extremely well presented, thank you for making it easy to understand.
Glad it was helpful!
Thank you a lot. Slow and step by step explenation. Just like it should be.
Glad you liked it! and thanks for watching
I watched a lot of videos but this one is understandable 💯💯💯💯
Thank You Very Much, Sir.
Kind Regards
From, Karachi, Pakistan.
Thanks for watching
Very nice this your explanation & fine demo thanks for your explanation
God bless you for making a great video for us
That’s pretty simple. Ty sir ❤️
You are brilliant David. 👏. GOD bless you.thank u
Such a good video! Like other people said, explaining it on paper and then demonstrating was so helpful. I’ve watched other videos, but I didn’t get it until I watched yours!
You're so welcome!
Well demonstrated, quite understood. Very helpful
Glad it was helpful! and Thanks for watching.
What would happen if I used a standard ON-OFF toggle switch on this self-holding circuit? Would that be safe? I am trying to replace my coffee machine momentary switch with a toggle switch. The coffee machine has a self-holding circuit. Thank you
It's really interesting and educative and i really like it . Thank you for your lecture
Thanks you Very much ........I understood perfectly.I am from Bangladesh.
Thank you so much!!!!!!! I was stuck on this issue on a job for hours
Glad I could help!
Bro I've been wanting to learn this for years, finally!!!!!
hello there, hope you are doing well? you really a good teacher!! will you please teach us how to read electrical circuit with contactor?
thank you for this explanation, it was great! definitely helped me understand the material i've been studying a bit better.
Thanks for watching
Like every one else, thank you so much for explaining this in very simple terms a knucklehead like me can understand. I am building a new control panel for a milling machine and I had everything worked out except for how to use momentary switches for the contactor. I want to use a contactor for safety as I didn’t want the mill to be able to restart on its own if there was a power interruption. Problem solved thanks to you.
Cheers Stuart 🇦🇺
You're very welcome!
Good Job.. 25 years ago this was the part that took a few days to know how. Rest of the wiring is common sense. Also You May explain to these rookies about the Neutral conductor going through the OL contacts. Thanks Sir.
I have been looking on the Internet for ages to understand how to wire up stop start in this way. Thank you for such an excellent presentation. I get it now!
Glad it helped!
very easy and not at all complex, Thank you my Brother 👍🏼
Thanks for watching
Thanks alot! Most easy to understand video I've seen!
Your most welcome
Very simple and easily understandable
You did awesome job. Thanks a million.
You are good teacher and that is why l follow ever video you upload
Bravo.
Simple enough
Excellent demonstration
The best explainer ever
Amazing Mwalimu✊🏽✊🏽
Thank you! I got my 10 HP 3 Phase dust collector wired up with the help of this video. We have start stop switches at 4 locations in my shop.
Hello sir, how r u doing?
You are doing a great job of teaching the people... but my suggestion is that you should organize a board which you can be writing some diagrams (projects)
Very grateful for your knowledge and delivery skills. Thankyou.
Welcomed
Thank you so much for taking the time to do this tutorial, it really helped me to get a better understanding.
you probably dont give a shit but does someone know of a method to log back into an Instagram account??
I stupidly forgot my password. I would love any tricks you can offer me!
@Ares Hudson Instablaster =)
@Immanuel Brysen i really appreciate your reply. I found the site through google and I'm trying it out now.
Seems to take a while so I will reply here later with my results.
@Immanuel Brysen it worked and I actually got access to my account again. Im so happy:D
Thank you so much, you really help me out !
@Ares Hudson glad I could help =)
Very clear explanation, thanks
Thank you for taking the time to upload your teaching video.
Thank you it was very helpful
Thank you for sharing your valuable knowledge!
Good day sir, I really appreciate the good wor you're doing, I have a question, the red wire is supposedly the life wire (24v), but you passed it through the stop button first and looped to the green button, which means the green button got it's supply by looping from the red button, does it mean the red button is continuous even though it's not pushed ??
This is what I was scearching for sir
Thanks
Wonderful !!circuit,
Thank you ❤
thank you, keep up the great videos. So cool,calm,collected
Thanks for watching!
Thanks sri...
Thanks for the video it teaches thanks! I work in industry and this is a very necessary thing, but in the video at minute 6:30 I could not understand why you connected A1 to L1?
Well explained bro. Uko juu sana
Made my day .at last I've got the right channel
Thank you
Very beautiful and nice video
Thank you so much for this video
your explanation is the best I had so far. do you have video on wiring with overload? thanks
Thanks for watching...........ua-cam.com/video/nRU_feyTPso/v-deo.html this video is manly on star delta starter but still shows how to connect an overload relay.
Great videos! Is it possible to wire 8 pin relay with 12v coil with push buttons.
Yes, its very much possible, take look at this video ua-cam.com/video/y7I94ny-HD0/v-deo.html the only deference is I used 11pin relay ac.
Very helpful video. Do you have more videos breaking down relays ?
Hope these can help ua-cam.com/video/ZY3cEOf0JvY/v-deo.html ua-cam.com/video/eYG-UPorQXQ/v-deo.html
Thanks for watching.
Your video is so informative when I get in trouble search on UA-cam mostly issues solved by herself
Very nice work. Clear and precise thank you
Thank you for watching.
Brilliant video!!
You are the best
Thanks you
Very nice good for new learners
Very helpful, thank you 👍
Glad it was helpful!
best explanation thank you
thanks that was perfect I under stand now.. now only if you could ad an overload protection to that with an e-stop. added that would be awesome . im not sure what it is but the way you did the video it makes it plane and simple and easy to under stand. ill have to look maybe you already have a video of this.
Thanks for watching and appreciating..ua-cam.com/video/lfcXpTplTZM/v-deo.html this will show how integrated an overload to the contactor in DOL starter circuit. it also has another part here
ua-cam.com/video/-9mV3XOZ2HA/v-deo.html...
I will make one in feature adding Emergency stop.
Very well Explained in simple steps. Good 1
Thank you 🙂
very good video thank you
Thanks for watching
Great detailed explanation thank you
Good explanation
I appreciate your work from TANZANIA
Thanks and welcome
Wow friend very clear explain thank you for sharing hope you see you around
Thanks so much for the straight forward explaination! Thank you for your time.
Kind sir
Thank you very much for the amazing explanation
GOD bless you for taking your time to teach ,i am really greatfull of it
Glad to hear that
Can we change the same circuit using only one switch to operate
This guy made this very simple to understand👍
Man you are amazing love this video very simple and understanding please upload more vidoes
Thank you, I will
I want like this vsd vfd wiring working principle video
Good explanation
simple and straight forward thx man
Awesome 👌
Thank you very much sir
Most welcome
I need to take some online course with you, how would be possible??
I thank you a lot for this tutoriel, it helps me a lot for more understand it
Glad it was helpful! Thanks for watching
Thank you for this awesome explanation 🙏
Well elaborated!
You teach very well which country are you
Kenya
Quite good, but I must say I would like to see you connecting it, to the motor, or whatever you want to use that system for.
Actually, I was thinking of using it with a bench-saw, my normal switch has broken, so I was thinking of making a kind of control box, and I thought I could put an Emergency button, and the on/off buttons, and the contactor would be for extra caution. Well, thank you for your help and I hope you make a video, showing how to connect the power to the machine. 👍👌
Interesting technology
Thanks men
Your welcome