How to Replace a Washing Machine Door Seal - Indesit

Поділитися
Вставка
  • Опубліковано 17 лип 2024
  • If your indesit washing machine door seal is leaking or has gone moldy then it likely needs replacing. Watch our video for a step by step guide. Replacement washing machine door seals can be found here: www.ransomspares.co.uk/parts/...
  • Навчання та стиль

КОМЕНТАРІ • 14

  • @kaelsalexander2482
    @kaelsalexander2482 3 роки тому +1

    Thank you for posting such a comprehensive tutorial. I was able to replace my Grandad's door seal yesterday afternoon with great success.

  • @juliedrew9662
    @juliedrew9662 4 роки тому +3

    thank you - this saved me a big call out fee & I replaced it in less than 15 minutes, with only 2 minor bruises!

  • @tonykett
    @tonykett 7 років тому +1

    you absolute star. i have the part, took apart the old seal and just sat staring at the new seal and how on earth i'd get those springs back in. thanks so much for posting this.

    • @benchudleigh1288
      @benchudleigh1288 3 роки тому +1

      Brilliant! Many thanks! Retaining spring was a tough one but perseverance and muscle got me there in the end. Cheers

  • @cornishcactus
    @cornishcactus 7 років тому +1

    Thank F for this vid!
    I thought I'd screwed up so bad when I was trying to clean the gunk from the seal and this friggin spring popped out.
    Managed to get it in the groove on the seal and pushed it all back but it didn't seem right.
    Thankfully saw this vid and how to remove the front spring and reattach it propperly!!
    Saved me a big call out fee and a lot of explaining to the misses!

  • @elvirabogiatzi31
    @elvirabogiatzi31 6 років тому +2

    Thanks a bunch! Leap of faith necessary when fitting the seal at the internal lid but other than that pretty accurate description. Job dooone ;)

  • @massenydiarra3384
    @massenydiarra3384 Рік тому +1

    Thank you very much I try and it’s working properly thank youuuu ❤

  • @gaborforgony6823
    @gaborforgony6823 3 місяці тому

    Thank you very much!

  • @Alanwcum
    @Alanwcum 2 роки тому +1

    and this is one I prepared earlier!

  • @askibaronaski123
    @askibaronaski123 2 роки тому +3

    its impossible to put the rubber back....

  • @crushedz
    @crushedz 5 років тому +1

    Great video.Very helpful.Thanks!

  • @gemmamoore9766
    @gemmamoore9766 3 роки тому +1

    It is normal for the new seal to rub on the drum the first use? Just done a rinse cycle and it is rubbing slightly. Double checked inner spring ring is flush.

  • @vajaterp5554
    @vajaterp5554 Рік тому +1

    Odlično 5+