Changing Any 22re Drive Belt For Dummies

Поділитися
Вставка
  • Опубліковано 18 січ 2023
  • This video is an all in one in depth walkthrough of the process of changing the alternator belt on a 22re. In the process I also remove and replace the other two drive belts.
    tags - Toyota Pickup tacoma 1993 90's 22re repair maintenance 4wd 4x4 drive belt alternator battery

КОМЕНТАРІ • 35

  • @salvadorhurtado3704
    @salvadorhurtado3704 Рік тому +5

    I’m on the side of the road about to conquer this task.

    • @xUNKNOWNxAC94
      @xUNKNOWNxAC94 8 місяців тому

      I was just on the side of the road ....
      I couldn't conquer the task 😢

    • @Aria-yt7cd
      @Aria-yt7cd 2 місяці тому

      Same

  • @darrentaylor1926
    @darrentaylor1926 Рік тому +2

    Saved me so much time bro thank you!! went through so many videos with idiots trying to explain how to do this until I saw this 🙏🏼

  • @penngwinn
    @penngwinn 10 місяців тому +1

    Thank you! No nonsense, no plugs. Appreciate the info. I'm adding AC to my 22RE

  • @benjoiner777
    @benjoiner777 6 місяців тому

    Great video. I had 2 broken and fragmented/missing belts. Couldn't even find a diagram... Thanks for taking the time to share, and not missing a beat. You the man!

  • @mw7403
    @mw7403 Рік тому

    THANK YOU SOO MUCH! after searching UA-cam for hours- FINALLY found the video I needed. Clear, and very helpful!!😊

  • @johncardoza1649
    @johncardoza1649 3 місяці тому

    Thank You, changed all three belts today with your perfect guidance.

  • @MattaKY5064
    @MattaKY5064 Рік тому +1

    Extremely helpful! Thanks so much for posting.

  • @christopherj2231
    @christopherj2231 10 місяців тому

    Thanks very much for the video, I only have one hand and was struggling actually but your video helped.

  • @brianfurman9607
    @brianfurman9607 7 місяців тому

    Dude. Kudos. Easy and understandable. Wish I found you two months ago. :D Keep up the good work. 58yr old with enough wrench knowledge to be dangerous here. Next is the timing chain and METAL guides I got from LC Engineering. I gots rattles.

  • @WShawn
    @WShawn Рік тому

    Thanks! Just replaced mine. Bit of a challenge but everything's back in and no squeals!

  • @colbycollier4239
    @colbycollier4239 20 днів тому

    Thanks man! Great video

  • @MileHighchica1
    @MileHighchica1 Місяць тому

    Great job 👋👍

  • @Callahan1
    @Callahan1 10 місяців тому

    thanks a shitload for making this. helped a ton.

  • @randycastorena4010
    @randycastorena4010 Рік тому

    Appreciate the video 🫶

  • @stevenhawkes4268
    @stevenhawkes4268 2 місяці тому

    Thanks Kenny

  • @MrBill2U
    @MrBill2U Рік тому

    2:00 Sounds a little counterintuitive? I see you loosen the pulley bolt 1st then the tensioning bolt? I'm about to change my pulley bearing and scratching my head. Thanks for your video definitely a help.

  • @jesuscabezon621
    @jesuscabezon621 8 місяців тому

    Thanks a lot man !!

  • @P3t_s0unds
    @P3t_s0unds 26 днів тому

    Thanks bro ❤❤❤

  • @Random_Car_Guy
    @Random_Car_Guy 9 місяців тому

    4:17 if you tighten them instead does it increases belt tension because my belt is squeaking and I think it’s because it’s loose.

  • @Jay-fq8uz
    @Jay-fq8uz 6 місяців тому

    Could tightening the front pulley bolt cause squealing?

  • @garryoak
    @garryoak 8 місяців тому

    Man I've recently gave up on working on my vehicles. Videos like this give me action to do this but then I loose the spark idk why.

  • @CHUKKILICIOUS
    @CHUKKILICIOUS Рік тому

    Hey Thanx 4 the "belt change 4 dummies!" By chance do you know where I can obtain a "temp sensor" for an 88 22RE 4x4? I've searched every auto store, on line, dealers, rock auto, etc. "They discontinued the part." Any pull-apart place of course, IF one gets lucky to find one, of course the engines are already gone. Of the x2 sensors on the front of those blocks, it's the one on the left. She starts when it's warmer weather, and once she's warmed up. But in the cold-no bueno! I don't trust the used ones I see on "ebay." Not something you can tell from a picture whether it works or not. Anyway, if U have any ideas, I'd greatly appreciate it! (-;

    • @kennysjunk7981
      @kennysjunk7981  Рік тому +1

      Are you referring to the coolant temp sensor (the little green plastic connector with the brass sensor)? if so, I didn't have much trouble finding them online. I brought one all of the way to checkout on a website called yotashop.com . let me know if that works for you or if you're talking about a different part

  • @carlosc8469
    @carlosc8469 4 місяці тому

    My bottom bolt on alternator isn’t getting tight.

    • @carlosc8469
      @carlosc8469 4 місяці тому

      And it was already loose so I’m guessing it’s missing the nut behind it

    • @P3t_s0unds
      @P3t_s0unds 24 дні тому

      Same here

    • @P3t_s0unds
      @P3t_s0unds 24 дні тому

      Nvm I figured it out! lol it has two sides, so you need two wrenches to hold one side onto place!

  • @rubbertire6608
    @rubbertire6608 11 місяців тому

    So I just need a 14 and a 12 mm and maybe a few screwdrivers

  • @rubbertire6608
    @rubbertire6608 11 місяців тому

    And what about the f****** crank sensor

    • @P3t_s0unds
      @P3t_s0unds 24 дні тому

      I'm sensing you're cranky. There. Crank sensor complete