Thanks for the positive feedback. The manifold must have been cracked at that location before as we never pulled that sensor out as you can see. Usually that comes from over tightening the sensor. Had we saw it we would have messaged you and asked if you wanted us to weld it up for repair. Any local welder or machine shop can tig it up. We also put on our thank you sheet to not over tighten the sensors when installing them because cracks can an will happen.
You’re very welcome, and I figured it was cracked from before. No worries and it’s all ready been repaired. Can’t wait to get this car running to make a video and show the results!
@@the_stable5534 great! We are happy to hear its fixed. Make sure you tag us the results so we can do a feature on you so we can get you some more followers. 👍
@@24theMoney for the lowers you want a felpro 1250 or 1262. For the upper to lower just file fit a stock one. It doesn't have to be perfect as most combos don't even use the full capabilities of our ported parts anyway lol.
It’s still sitting the same, I bought the 2013 boss 302 so it’s been on the back burner. The boss is finished up so foxbody content should be coming soon!
Thanks for the positive feedback. The manifold must have been cracked at that location before as we never pulled that sensor out as you can see. Usually that comes from over tightening the sensor. Had we saw it we would have messaged you and asked if you wanted us to weld it up for repair. Any local welder or machine shop can tig it up. We also put on our thank you sheet to not over tighten the sensors when installing them because cracks can an will happen.
You’re very welcome, and I figured it was cracked from before. No worries and it’s all ready been repaired. Can’t wait to get this car running to make a video and show the results!
@@the_stable5534 great! We are happy to hear its fixed. Make sure you tag us the results so we can do a feature on you so we can get you some more followers. 👍
@@bigdogsportingtonyb2833 absolutely, will do! Will be showing my Dad’s 90 fox with the Holly intake you’re currently porting too!
Does off the shelf upper/lower gasket interfere with the port job?
@@24theMoney for the lowers you want a felpro 1250 or 1262. For the upper to lower just file fit a stock one. It doesn't have to be perfect as most combos don't even use the full capabilities of our ported parts anyway lol.
I cant find an update on your playlist of this. How did it run? Any dyno figures?
It’s still sitting the same, I bought the 2013 boss 302 so it’s been on the back burner. The boss is finished up so foxbody content should be coming soon!