Phatmoto carburetor tip. Clean pilot jet, quick, fast, easy.

Pilot jet, easy in and out, cleaning. If you run ethanol fuel your pilot jet clogs easily. If it only runs on choke or partial choke, 95% of the time it's a clogged pilot jet

[@ciliciaann3504]

😎👍

[@eliluna3358]

Hi Beau.. I have another question for you.. I see you have a petcock on your phatmoto.. can I ask where you got it from? Is it special order because the one I have would not fit.. thank you

[@beaubrummelmotorizedbicycles]

The 2019 Phatmoto Rovers came with the gas petcock stock, then they stopped in the 2020 models. The thread size is M10 x 1.0 Some are bigger like the Felt Faker frames you can buy they take the larger petcock M10 1.5. I am pretty sure the Phatmoto is the M10x 1.0 thread, I hope this helps.

[@eliluna3358]

@@beaubrummelmotorizedbicycles thank you..the one I tried wouldn’t turn because frame got in the way..but I will look into it..thank you for all your information

[@JasperJames0912]

Hey Beau, can you make a video on the gear reduction oil maintenance? Ive been looking for info everywhere on it and i havent a clue what goes in it, or anything. Thanks!

[@beaubrummelmotorizedbicycles]

Hi Jasper James, When you say gear reduction are you referring to the 36 tooth gear and the jack shaft assembly?

[@JasperJames0912]

@@beaubrummelmotorizedbicycles so there's the normal motor oil drain and fill on the front of the motor that's a white twist cap, and one on the back that's a twist cap. If I'm understanding the manual correctly. That's the "gear reduction oil" but the manual only has indication/information on the regular oil side. That's where I'm confused at.

[@beaubrummelmotorizedbicycles]

@@JasperJames0912 There is no gear reduction oil. Both the front and rear oil fillers are for engine oil only. One has the dipstick and the other just a plug. Oil is 30 weight or 10w-30 non detergent oil.

[@JasperJames0912]

@@beaubrummelmotorizedbicycles ah, I see. So they bamboozled me 🤣. Thank you for the info!

[@beaubrummelmotorizedbicycles]

@@JasperJames0912 Some of the bigger engines do have gear reductions for certain applications, but the Lifan 152F-3 does not.

[@onesimopena4341]

Where did you get the performance air filter at ?

[@beaubrummelmotorizedbicycles]

That air filter is homemade, I used a small tin container with a removeable top. I made a large hole for the main carburetor flow and 2 smaller holes for the stud nuts. I then used the green foam for a larger lawn mower and cut it to fit. I then drilled multiple holes in the lid. It works very good.

[@niteshades_promise]

​@@beaubrummelmotorizedbicycleslooks great🍻

[@kalaiau-stein7417]

Can you make me one?

[@randallchunn8286]

I use guitar 🎸 strings as i have some of them China 🇨🇳 Girl engines 😊

[@beaubrummelmotorizedbicycles]

Yeah, guitar strings would be good as they are strong and you can get a grip on them, great idea.