EPISODE 62 - Welding in the new Rare Spares Cowl!
Вставка
- Опубліковано 4 жов 2024
- This Episode the brand new Rare Spares cowl panel is finally dusted off and welded in place to complete all of the fabrication on the build.
BUY HOODIES AND TSHIRT MERCH HERE
barnesys-build...
BUY METAL X BLADES HERE
bit.ly/2ZlFUUj
VISIT KYPER WEBSITE
kyper.com.au
VFX BY DIGITAL FUNNEL
digitalfunnel....
Coming out good Barnes unbelievable video keep them video's coming cheers
Thanks mate👍
Looking fantastic
Going well. Using a fire blanket is a great idea and much cheaper than the real thing. I will keep that one in mind. Jeff
I thought I’d slacked off on my build, but now I see you took a break too, looking forward to getting back into mine! (Ran out of shed room here for a year!)
Yeah it's slow old going but as long as it's going that's the main thing!
Great work! Bet you can see the proverbial light at the end of the tunnel. Good tip about using fire blankets. I've had to use one on the Rover project while grinding/welding as front and rear screens are bonded in and helping keep the shell rigid.
Thanks, yes I was looking for something and just remembered I had a fire blanket stored away. Worked well. Yes it's certainly been one hell of a marathon, looking forward to finishing it now. Cheers
Looks good mate! A lot of details to work out even the most simple of parts - I'm surprised they didn't drill some of those holes in the replacement part. Great to see you well and truly in the deep end with some future builds in the wings too ;-)
I have to replace the cowl on my one Tonner, so thanks for the little ah ha moment regarding the dog pissers.
It makes sense that they’d be angled to the middle third of the windscreen so the wiper blades get to move the water across a larger to clean better. 👍
Cheers.
Yeah it's a bit of mucking around, shame rare spares don't punch them out for us!
Sweet as bro! Got some momentum going now. Yew.... And agree with,it's fun getting the welder out. Am going to find something i can weld.. cheers
Definitely, missed the welder so was good to get back into it!
Great work mate , nice to see progress , looking forward to seeing some colour on the car 🚗
Cheers! Yes it's not far away now! I can't wait
Awesome work again, enjoy your vids
Thanks Tony👍
Hi Barnsey, have a look at your auto store, they now do zinc primer in black. Means you won't see the zinc grey when you look through the gaps.
Build is coming along great, keep up the good work.
Yeah thanks mate, all good though I'm painting it all in primer anyway and you can't see any zinc inside. Cheers!
fireblanket ,great idea, ive got 2, i will use, never thought about that, cheers
Your body work come up well mate. Looks straight. You would have to be pretty happy with that? Well done looking good
Yeah thanks mate, I am really happy with it, it's not flawless but any more and you wouldn't drive it, and I want to drive it!
I have missed the catch phrase
“Let’s get into it”
Got some progress now
I pumped one out just for you mate😂
Barnsey. You can always weld a small lip on The top edge of the door to get the gaps right. I drill the welding Holes a bit bigger so I can get more strike with the weld. Also coat the part I'm welding to as normal then used a small brush on the drill to remove paint, sealer etc just in the hole. Got them cheap on eBay. Works well. Sorry, think of these things as I watch, too late🙂 under the spray nozzles put a dab of sealer under them as you pop in for the final time. Remember Your paint will take up another mm or bit less....
Yeah i did think about doing the wire on the door edges but honestly it doesn't really worry me, if it doesn't look great when guards are on then i will re-assess but for now i'm just happy to get it on.
Will use the sealer on the nozzle trick though! cheers
nice work👍
Thanks mate! Not long to D day now
looking good
wont be long now till you paint it😃
Counting down the days!
Cool man.
Lookin like a Ute now dude! Just a heads up the black coating on replacement panels is to be removed before body work - it’s only purpose is to stop surface rust in storage and not intended to be the basis for duco. Might see some of that Sick colour soon !,
Cheers mate, yeah it is still an epoxy coating however so a good scuff up is fine, I've done it before on other panels. I might do a layer of epoxy anyway before primer.
I agree, I’m going to give the underside of my new cowl (and the top) new primer before I weld in👍
How good is Barnsey?😎 he’s good 👌
Check windscreen and moulds fit
Don't have a windscreen as yet so had to take a punt it will fit. There's a bit of play for fitment on the cowl for the windscreen so should be alright.
Fuck yeahhhh
Why are you doing the cowl so late in the build when you have to do all that grinding don’t get it , any way
It's a structural piece of the body so needs to be off rotisserie and on the body to make sure everything is aligned correctly. Bodies can sag on rotisseries, especially if they have been hanging for years, like mine was. In hindsight now that it is welded on could you weld it on while still on rotisserie? Maybe, I don't know, but being a first build you have to decide on courses of action to get the job done and in this instance i chose this method. It created more work for sure, but not that much more, and it's all done now, and I know it's aligned. Cheers mate
@@BarnesysBuilds fair call
There were two small straight pieces with a hole at each end in my cowl box, any idea what they are for or do? Can’t see where they are meant to go unless it wasn’t meant to be in there.
They are windscreen plates for when they mount the windscreen on the cowl.
@@BarnesysBuilds oh thanks for that, I never saw anything like that when removing the windscreen so was beginning to think it was a wrong addition in there. Cheers