Making homemade car lift

Поділитися
Вставка
  • Опубліковано 2 лют 2025
  • Hi everyone! In this video I'll show you how to make a homemade car lift.

КОМЕНТАРІ • 98

  • @TychoVan
    @TychoVan 2 роки тому +54

    this man could build a woking spaceship and open the videio with "in this video I will show you how you can make this at home"

  • @mrshaneyt43
    @mrshaneyt43 2 роки тому +9

    Very interesting. I’m sure this is a great help in your workshop. Always nice not having to lay on the floor to work under a vehicle 👍

  • @aacar4095
    @aacar4095 Рік тому +6

    Very cool and excellent job. The thing I like about the quick jacks though is you can get under the middle of the car. The type of scissor jacks in this video block all that. Still excellent job.

  • @DktheWelder
    @DktheWelder 2 роки тому +4

    That is very cool nicely built

  • @sharkyshark1
    @sharkyshark1 2 роки тому +17

    I think I would add some cross bars between the two sides so cars would wobble far less when being raised up

  • @Abrikozenjam.
    @Abrikozenjam. 2 роки тому +3

    Cool stuff

  • @johnimacaroni76
    @johnimacaroni76 2 роки тому +13

    You made a car from Cyberpunk, Buggy from GTA, a Gyro from Rust... Have you considered making a vehicle from 7 Days to Die? Like the Motorcycle?

    • @DisillusionedMillennial
      @DisillusionedMillennial 2 роки тому +5

      Dont give them any ideas. They still habe not finished the cyberpunk car.....its been going for years and they keep starting new projects instead of finishing that one.

    • @krejziks3398
      @krejziks3398 Рік тому

      @@DisillusionedMillennial that's what it means doing work from a hobby without a deadline... You work on it, when you feel like it.

  • @paulhealey2984
    @paulhealey2984 9 місяців тому

    I'll knock this up on my day off next week.

  • @alanprado6210
    @alanprado6210 2 роки тому +3

    so basically each cillinder has to have a load capacity of 4x the vehicle weight?

    • @denimory
      @denimory 2 роки тому

      it would seem that cylinders need repair as they cant lift 1.5t car,probably needs new sets of seals

    • @alanprado6210
      @alanprado6210 2 роки тому

      @@denimory or maybe the pump isn't strong enough to supply enough oil to lift that weight

  • @Odinakafx2
    @Odinakafx2 2 роки тому +3

    If u can build any concept car from scratch that will be grate please

  • @barenekid9695
    @barenekid9695 9 місяців тому +2

    Aware that the commercial version of this runs ~1600$.... complete with Safeties and remote pump?

  • @RL-ru2st
    @RL-ru2st 2 роки тому +12

    it will be a bit risky without lock as hydric fluid may leak

  • @toyotahavehorspower4003
    @toyotahavehorspower4003 2 роки тому +3

    Man deseves more subs

  • @digitaLm0nk
    @digitaLm0nk 2 роки тому +1

    Diy! If you have welder ...grinder.... workshop.... good vid either way

    • @DSperformance96
      @DSperformance96 Рік тому +1

      If you don't have those, you probably don't need a lift right?

    • @Skyx5m50
      @Skyx5m50 Рік тому

      I own a BMW and my wife owns a 300. I needed to make one of these because I’m always working on the cars. It has been helpful and has made everything easier. If you know how to weld you can make anything.

  • @GTX3570
    @GTX3570 Рік тому

    What the size of the pistons?

  • @dustinwestglow
    @dustinwestglow 6 місяців тому

    dude this is CRAZY

  • @nak_attak
    @nak_attak 2 роки тому +1

    why christmas music? in july?

  • @Jack_Hurst_
    @Jack_Hurst_ 10 місяців тому

    The waight limit is because the material and shape or because of the pumps capability? Or could you just add 2 more pistons to have 2x the lifting capacity

    • @launchbreak
      @launchbreak 6 місяців тому

      It can be either because of the material, or because of the motor creating the pressure within the pump. Theoretically, with the infinitely strong material, only the motor power would need to increase in order to lift a heavier car.

  • @554drago
    @554drago Рік тому +1

    Definitely gonna sample this video but if I were you I’d put some more heat into those welds

  • @possibleproblem479
    @possibleproblem479 2 роки тому +4

    Yall should make a homemade car on the homemade car lift

    • @shvonkle
      @shvonkle 2 роки тому

      He's already building a car from cyberpunk 2077

    • @toyotahavehorspower4003
      @toyotahavehorspower4003 2 роки тому

      @@shvonkle but not on this lift but maby in another vid

    • @shvonkle
      @shvonkle 2 роки тому +1

      Maybe he built the lift because He needed it for the next quadra Video. You should totally check it out, its so awesome

  • @monoburgos93
    @monoburgos93 Місяць тому

    This looks very safe 👀

  • @DSperformance96
    @DSperformance96 Рік тому

    Can we have plans for this? Might want to build one and add some things to it.

  • @niklaskhathutshelo
    @niklaskhathutshelo Рік тому

    Imma build this on a car trailer, mobile mechanic❤🤗😊

  • @tomiikp483
    @tomiikp483 Рік тому

    Hello, could we somehow agree on the drawings or more detailed dimensions of the jack, I am looking for some detailed dimensions and I really like your work. Thank you in advance for your reply.

  • @ryanhamil1530
    @ryanhamil1530 2 роки тому +9

    I make actual lifts for a living and all of them have redundant safty locks because hydraulics fail every day it's just a matter of time before you blow a hose or seal and loose your legs. Good luck! Ps you could of bought one of these used for 600 dollars

    • @RusThompson
      @RusThompson 2 роки тому +3

      $600 ? Where? I'll buy one tomorrow

    • @iTs_Turbo_time_in_turbonia
      @iTs_Turbo_time_in_turbonia 2 роки тому +1

      Where can I buy a hydraulic car scissor lift for $600?

    • @RusThompson
      @RusThompson 2 роки тому +1

      @@iTs_Turbo_time_in_turbonia Good question, Harbor freight had low or mid lift for 600 of course until I started looking for one.

    • @iTs_Turbo_time_in_turbonia
      @iTs_Turbo_time_in_turbonia 2 роки тому +1

      ​@@RusThompson You have any idea where i should start searching?

    • @RusThompson
      @RusThompson 2 роки тому +1

      @@iTs_Turbo_time_in_turbonia Harbour Freight is ready to start selling them again.

  • @georgetossi6008
    @georgetossi6008 10 місяців тому

    what about safety locks so it doesn't fall on you when yo are under it

  • @dannymoneywell
    @dannymoneywell Рік тому +2

    Seems dangerous, especially with the 4 tacks on the reinforcements, i'd never get under that and also that won't hold a lot of cars due to how inflexible it is regarding the support points.

  • @kerashastreet5691
    @kerashastreet5691 4 місяці тому

    Жаль на русском так и не выпустил видос, в твоей озвучке по-приятнее и более понятно. Ну что, придется сначала смотреть, потом по кадрам раскидывать, чтобы позаимствовать некоторые решения) 2 года собираюсь начать делать свой подъемник)

  • @surfguy4u
    @surfguy4u Рік тому +1

    needs a seperate lift lock. under engineered for weight load or any safety margin.good copy of existing lifts on market. Have to agree with Trevorjarvis just not safe at all to get under it.

    • @trevorjarvis3050
      @trevorjarvis3050 Рік тому

      They’re gonna die if they get under a car on that thing!

  • @onewithGod4life03
    @onewithGod4life03 2 роки тому +2

    Second!!!! 😆

  • @richardwright5316
    @richardwright5316 Рік тому

    Why don't you publish some plans and sell them. I'll buy a set for sure.

  • @WarrChan
    @WarrChan 7 днів тому

    I think it would be cheaper to buy a ready made lift than the cost of the equipment including an engine that failed.

  • @mr.grotto
    @mr.grotto 8 місяців тому

    Did I just see spot welds holding the bottom of that scissor jack? Oh thank god they were just holding it in place to test.

  • @ThomasTabak
    @ThomasTabak 11 місяців тому

    can in have the plans ?.

  • @jeremyr7147
    @jeremyr7147 Рік тому

    Man that was a lot of work 👍👋🇷🇺

  • @LightGesture
    @LightGesture Рік тому +1

    That got complicated real quick once you got into an engine with hydraulics....lol

  • @javieralvarez9146
    @javieralvarez9146 2 роки тому +1

    👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

  • @revemb4653
    @revemb4653 2 роки тому +5

    thats super dangerous though

  • @olivergrandbois2937
    @olivergrandbois2937 2 роки тому +1

    J'aime ce système 🇨🇦

  • @Odinakafx2
    @Odinakafx2 2 роки тому +4

    Please we need home made car from scratch

  • @jagboy69
    @jagboy69 Рік тому +1

    You couldn't pay me to get under that!

  • @DisillusionedMillennial
    @DisillusionedMillennial 2 роки тому +1

    Are you ever going to get back to making the quatra vetch? Its getting annoying how you are starting and finishing new projects before that one is finished!!

  • @АлександрФунтик-ц4з

    КРУТО!!!!!!!!!!!!!!!!!!!!

  • @adrianorogo
    @adrianorogo Рік тому

    hare el mío, muchas gracias

  • @Астропитек
    @Астропитек 3 місяці тому

    Почему на видео Жигули, а речь на английском?))

  • @daniellemeeks3862
    @daniellemeeks3862 Рік тому

    You didn't clean your metal, you were welding.

  • @kjhnsn7296
    @kjhnsn7296 6 місяців тому

    A crushed cockroach comes to mind....😬

  • @WDRS79
    @WDRS79 Рік тому +1

    great attempt at a video but cant stand the choppy generated voice over. rather listen to a real person with an accent than this

  • @swatcat7928
    @swatcat7928 Рік тому

    No safety locks......

  • @sunyun4425
    @sunyun4425 Рік тому

    Can you convert this video to inches and feet and pounds?

  • @TeezerDriz
    @TeezerDriz 10 місяців тому

    Annoying music, these videos do not need any music. Make the thing and talk about it, simples.

  • @aladdincafe9699
    @aladdincafe9699 Рік тому

    Homemade 😂

  • @valerabarsov
    @valerabarsov Рік тому

    it is immediately clear that the Russian person

  • @petrus0002
    @petrus0002 4 місяці тому

    homemade?....:)

  • @ВиталийХвесько
    @ВиталийХвесько 10 місяців тому

    Стрёмный какой-то подъёмник🤔

  • @darkcnight
    @darkcnight 2 роки тому +1

    xi jin ping winnie the pooh

  • @arsamakkhamkhoev258
    @arsamakkhamkhoev258 2 роки тому +2

    Почему русско язычного е
    Нету видоса

    • @Серёга372
      @Серёга372 Рік тому

      всё продали , всё для питухов

  • @GeorgeAlex-j6k
    @GeorgeAlex-j6k Рік тому

    Nope. Don't try that at home kids.

  • @fix0071
    @fix0071 2 роки тому

    чем бы дитя не тешилось, абы не плакало!

  • @oblinacavanaugh4544
    @oblinacavanaugh4544 3 місяці тому

    Ffs!!!! 😒
    You tell us that you made a video to show how to build the lift. But NO partslist or blueprint.

  • @FlameBlue9016
    @FlameBlue9016 Рік тому

    The guy can make his own lift but can’t voice his own video….. come on bro….. AI voices suck it’s lazy.

  • @Дмитрий102.7
    @Дмитрий102.7 10 місяців тому

    Еееее
    Ваз 2111

  • @trekgod3
    @trekgod3 6 місяців тому

    Soon as I heard that awful AI narration, voice thumbs down and scrolled away

  • @angelfa1804
    @angelfa1804 2 роки тому +1

    @MundoJeep

  • @DktheWelder
    @DktheWelder 2 роки тому +2

    That is very cool nicely built