700cc twin PUSH MOWER vs 4 feet tall GRASS **CRAZY**

Поділитися
Вставка
  • Опубліковано 11 січ 2025

КОМЕНТАРІ • 948

  • @wdixon27
    @wdixon27 5 місяців тому +949

    open up the front of the deck a couple inches, that way the blade gets a chance to get into the tall stuff before it gets outta reach

    • @Someloser47lol
      @Someloser47lol 5 місяців тому +35

      THANK YOU

    • @PaulThomas-qo9vy
      @PaulThomas-qo9vy 5 місяців тому +38

      Yes, open the deck front & the front part of the blade guard/fence. Reinforce the top of the deck with angle iron to replace the removed deck front metal. The reinforcement angle iron should connect to the front wheel mounting metat so they won't bow out from the weight. This will stop the front of the deck metal from pushing over the grass! See how the Billy Goat brand field & brush mower front deck is designed & do something similar. You have plenty of engine & blade but you have got to stop pushing over the grass & it will cut for sure! Essentially you are kinda building a mini brush hog shredder that's open in the front!

    • @marktaylor171
      @marktaylor171 5 місяців тому +8

      Had to do that when both my tractors went down.

    • @jimmykreutz6087
      @jimmykreutz6087 5 місяців тому +6

      Wow this dude..

    • @jeffdeal1162
      @jeffdeal1162 5 місяців тому +7

      This. I actually cut 2 inch cutouts on my rider for this purpose, along with pine cones. Works like a charm. My deck was so damn hard it took a while to do with an oscillating tool carbide blade so maybe use a cut off wheel instead. Also put some damn Gator blades on that thing!!!

  • @Mitch-rk5mz
    @Mitch-rk5mz 5 місяців тому +490

    Hey.. I have 40 years experience in the lawnmower business. The problem is the mower deck is pushing the grass down. If you cut a notch out of the front of the mower it will cut the high grass

    • @snjspring
      @snjspring 5 місяців тому +6

      This

    • @snjspring
      @snjspring 5 місяців тому +4

      @My-Pal-Hal nice... you could've sat there and read quietly - instead you typed this comment and displayed your short-comings.

    • @My-Pal-Hal
      @My-Pal-Hal 5 місяців тому

      @@snjspring
      No.
      I typed My Comment, not yours.
      So I'm going to assume it's your illiteracy that is holding back your English comprehension.
      Best to understand a language, before understanding things written in it. That's where most people start 😂
      ... he doesn't get, obviously one of his many shortcomings 🤤

    • @My-Pal-Hal
      @My-Pal-Hal 5 місяців тому

      ​​@@snjspring
      That's not true.
      I typed My Comment, not yours.
      So I'm going to assume it's your illiteracy that is holding back your English comprehension.
      Best to understand a language, before understanding things written in it. That's where most people start. A little bit of This, and a little bit of THAT 😂
      ... he doesn't get, obviously one of his many shortcomings

    • @snjspring
      @snjspring 5 місяців тому

      @@My-Pal-Hal I wish you well

  • @lifeintornadoalley
    @lifeintornadoalley 5 місяців тому +104

    As a commercial lawn care professional, try this to upgrade the push mow:
    You need high lift blades, not the 3n1 mulch. You need a discharge big enough to expell the clippings.
    Remember the science: you need a vacuum effect. With high lifts, you're pushing more air around, and wouldn't be a problem making that grass stand up underneath it after flattening it.
    I've experimented like this when I first started. I've threw a Kawasaki 21hp on a push mower. With no pullies to reduce the blade speeds, you can imagine how fast the blades were going. Dam close to 2k rpm. At that point, a stick will leave indents on the frame.

    • @WJCTechyman
      @WJCTechyman 5 місяців тому +13

      Or, you can skip all of that and make a sickle bar mower. Lift doesn't really apply here as this is brush mower territory, not landscaping a hoity-toity suburban gated community house lawn. On long human hair we don't use a lawn mower, we use the sickle bar mower's relative, reciprocating clippers. If we want lift, those clippers are paired with a vacuum cleaner.

    • @bryanteel3046
      @bryanteel3046 5 місяців тому

      Correct

    • @driftracing08
      @driftracing08 5 місяців тому

      Its all about the size of the mower deck that bigger blade will cut the taller grass more cleanly no matter how much air the blade is moving

    • @spookerz35
      @spookerz35 5 місяців тому

      You may have had something really awesome if you could locate a used Toro Time Master deck - they use 2 blades. Mulching really long grass is probably not going to happen, so a side discharge might work better. Maybe adding flare tips to the exhaust pipes can enhance the appearance 😅

    • @lifeintornadoalley
      @lifeintornadoalley 5 місяців тому

      @@WJCTechyman yup. We take care of brush too. Commercial mowers handle it just fine

  • @xDmakc
    @xDmakc 5 місяців тому +230

    Might be the first time the "mower" part of a lawnmower was used in this channel

    • @MisterdionneYT
      @MisterdionneYT  5 місяців тому +22

      😂😂😂😂😂

    • @IIIIIIIlIlIl
      @IIIIIIIlIlIl 5 місяців тому +4

      I didn't even realize it was him because of exactly this

    • @Ender3dprinter
      @Ender3dprinter 5 місяців тому +2

      ​@@MisterdionneYT what starter did you get for your engine?

  • @justinbelshe
    @justinbelshe 5 місяців тому +87

    I keep screaming "REV IT UP AND LEAVE THE THROTTLE ALONE!!"

  • @ofp8574
    @ofp8574 5 місяців тому +92

    The thing to do for cutting tall grass, is to have an open front on the mower. That way you aren't folding the grass over as you're cutting it. Also makes it easier to push. There's no protection against stumps, but even a low power engine can cut tall grass.

    • @99milesaway41
      @99milesaway41 5 місяців тому +5

      That's actually brilliant, good thinking

    • @pleasureincontempt3645
      @pleasureincontempt3645 5 місяців тому +1

      Imagine having some some hay. Always helpful advice from a keyboard warrior.

    • @KF0KDE
      @KF0KDE 5 місяців тому +2

      I came here to say this. Cut out the grunt of the deck between the wheels and he'll be golden.

    • @brettmoore3194
      @brettmoore3194 5 місяців тому +1

      Like a d.r. horton

    • @lifehealth489
      @lifehealth489 5 місяців тому

      and and connect it to your push mower grass blaster and use your riding mower to pull it around and around and around mowing front and rear power whahlah Problem solved !!Happy chopping

  • @neilwalker8686
    @neilwalker8686 5 місяців тому +55

    It’s folding the grass over, under the blade. Open the front, exposing the blade.

  • @Joshua-o6g9b
    @Joshua-o6g9b 5 місяців тому +40

    Give that thing some throttle 😂

  • @onestopfabshop3224
    @onestopfabshop3224 5 місяців тому +124

    The push mower that never bogs. Lol

  • @Robert_Mac77
    @Robert_Mac77 5 місяців тому +109

    You should take the 700cc motor and build a lawn mower for cutting. Swap the pulleys and add turbo😂😂😂😂

    • @ksaab3946
      @ksaab3946 5 місяців тому +4

      I’d love to see that

    • @JohnSmith-pl2bk
      @JohnSmith-pl2bk 5 місяців тому

      @@ksaab3946
      ua-cam.com/video/vai5NOIvKbQ/v-deo.html

    • @HarmonRAB-hp4nk
      @HarmonRAB-hp4nk 5 місяців тому

      turbo's suck... its only until ya get up to speed they actually work....... but that beside the point... dunno, I'd take a brush hog to it..... 8 foot cutter,, meant for that kinda stuff.
      you do small lawns? we did acre's, asmallest was down by the lake, 2 and a 1/2 acre property

    • @Robert_Mac77
      @Robert_Mac77 5 місяців тому

      @@HarmonRAB-hp4nk ok

    • @SP-qu1lv
      @SP-qu1lv Місяць тому

      All the grass, dirt and other shit getting sucked up in the turbo wouldn't be worth a fuck

  • @ThisIsMyNewAlias
    @ThisIsMyNewAlias 5 місяців тому +20

    And people telling me tuning a chainsaw because i was boared is crazy. Meanwhile this madman rides a 700cc chopper lawmmower on his yard

  • @kit4
    @kit4 5 місяців тому +65

    now you need to make a 700cc weed eater

  • @_AlejandroGonzalez_
    @_AlejandroGonzalez_ 5 місяців тому +20

    3:13 “So much torque the chassis twisted coming off the line”

  • @Bloodbain88
    @Bloodbain88 5 місяців тому +5

    That's why a brush mower, made to tackle this type of stuff, has on open deck on the front.
    And also hydraulicly driven to make it easier to plow through all that.

  • @bugz000
    @bugz000 5 місяців тому +35

    this guy has a whole degree in time-wasteology....

    • @diebyty878
      @diebyty878 5 місяців тому

      With 4 ft tall grass is have to disagree, loser

    • @reesemolloy6109
      @reesemolloy6109 5 місяців тому

      Shut up

    • @billingenfelter4115
      @billingenfelter4115 6 днів тому

      I think we all learned something here. I'm glad he tried before me.

  • @davesrvchannel4717
    @davesrvchannel4717 5 місяців тому +17

    Air cooled engines are designed to run at higher rpm to keep cool. They can overheat by running at idle too long or low rpm.

    • @spudstudios3342
      @spudstudios3342 5 місяців тому +3

      these briggs opposed twins starve for oil at low rpm also, and can blow up from it. i run my idle at like 2k

  • @quevicular
    @quevicular 5 місяців тому +32

    Harley Hay Hacker

  • @heru-deshet359
    @heru-deshet359 5 місяців тому +2

    He's a crazy kind of guy with lot's of time and energy on his hands.

  • @psalm2forliberty577
    @psalm2forliberty577 5 місяців тому +5

    Higher revs
    Open deck up in front
    Sharpen blade
    Cut half widths
    BINGO

  • @gosuflickzy__9882
    @gosuflickzy__9882 5 місяців тому +1

    1:38 le big prend tes mains pas tes pied 🤣j’adore tes vids ❤

  • @Muksanim2012
    @Muksanim2012 5 місяців тому +6

    That engine sounds sick.

  • @donaldardell5742
    @donaldardell5742 5 місяців тому +2

    I'd suggest a few things: provide a opening in the front of the deck so that the blade can engage the grass without folding it over, which should also help your forward rolling resistance. Second, get bigger wheels with pneumatic tires, it'll provide more deck height and provide for less rolling resistance. Third, weld up or open up a way for the clippings to be ejected, it will keep the blade from having to mulch all the already-cut grass. And rev it up and hold it open!

  • @Hellodarknessmyolefriend
    @Hellodarknessmyolefriend 5 місяців тому +11

    Something that Tim the toolman taylor would had created. Hahaha 😂

  • @luchoudremont
    @luchoudremont 5 місяців тому +1

    10:41 grandpa who fought the Germans in the Ardenne Offensive, walking trough the woods after hearing this : “There’s a f**king Tiger Tank approaching 💀 💥”

  • @courtney-rw8ch
    @courtney-rw8ch 5 місяців тому +8

    700cc? That’s a mowercycle!

  • @patrickflanagan8008
    @patrickflanagan8008 5 місяців тому

    Ohhh, I found this soooo pleasing....it put a big smile on my face at 12.45am . Nice one matey.

  • @andrewt9204
    @andrewt9204 5 місяців тому +6

    Gotta do a 2-pass method with this stuff. We bought land that had grass like this.
    We had a diesel Jacobsen G-4x4 (look it up, its a sweet tank of a lawn tractor) that had a 3 point in the front. We just lifted the front deck a foot off the ground and the rear deck as normal.
    I miss that Jacobsen, the transmission blew and they are very rare so it never got fixed. Not many tractors out there with: 4WD, 4 wheel steering, rear 3-point + PTO, and front 3-point + PTO. It also had a 2 speed gear box with ~4 forward and reverse gears. A truly universal machine.

  • @Trek_Rail
    @Trek_Rail 8 днів тому

    Bro. That is so dangerous.
    I love it!!

  • @noworriesmate5903
    @noworriesmate5903 5 місяців тому +4

    Push mower needs a lift kit. Let's say 6" lift kit.

  • @scratchdog2216
    @scratchdog2216 5 місяців тому

    I ran a 600cc twin propane driving a 27" buffing pad after hours in grocery stores. Loved it. Awesomely fast hard shine. Definitely cool fun project here.

  • @Slugg-O
    @Slugg-O 5 місяців тому +4

    Taller wheels would make it much easier to push - less rolling resistance.
    The deck can only process so much grass at a given speed. More RPM would help a little.

  • @KixBryant
    @KixBryant 5 місяців тому +2

    I laughed, I cried, this video has it all!

  • @ItzWippe
    @ItzWippe 5 місяців тому +4

    Love ur vids bro

  • @darkmugetsu6572
    @darkmugetsu6572 5 місяців тому +1

    I have a 656cc engine in my car and here a 700 cc motor powers a damn pushmower......

  • @pancudowny
    @pancudowny 5 місяців тому +3

    The problem isn't the amount of power being used, blade sharpness, or blade/engine speed... it's the front of the deck(s) themselves: The leading edge of the blade housing just pushes the grass over before the blade(s) get a chance to cut it. If it were open--like on a brush mower--then it'd get a decent chance at initially cutting the grass near the base, thereby allowing it to be further chopped-up [and discharged] as smaller clippings by the blade... as how a rotary mower is designed to do. THEN is when the increased power is necessary to handle how heavy/thick the brush is.😕

    • @JohnSmith-pl2bk
      @JohnSmith-pl2bk 5 місяців тому

      Totally enclosed plate steel deck....
      ua-cam.com/video/vai5NOIvKbQ/v-deo.html

  • @Z-Z-W_origin
    @Z-Z-W_origin 5 місяців тому +1

    Take 2 passes. First pass at 2 feet (Maybetry bicycle tires to get proper height). 2nd pass at ground level (half and half). Maybe mount it in front of ride-on to knock the grass down so the ride-on can cut it properly.
    The problem is that when the grass is taller than your mowing deck is long, the grass gets flattened, which stops if from being cut.

  • @EthanBurns-kz5og
    @EthanBurns-kz5og 5 місяців тому +2

    Love the videos keep it up

  • @Entre1099
    @Entre1099 5 місяців тому +2

    Everybody is in a race to get something done. This guy is one of them. Lol nice build. Do an update when you open up the front of the deck.

  • @grv2567
    @grv2567 5 місяців тому +3

    I would add a throttle control just for that extra power.

  • @pancudowny
    @pancudowny 5 місяців тому +2

    Swapped a 12-hp Briggs in place of a 10-hp on a 36" lawn tractor, and used the longest length of black pipe at the local hardware as part of the exhaust. The result: Never needed to gear-down while mowing up slopes, and used less fuel than before.

  • @onestopfabshop3224
    @onestopfabshop3224 5 місяців тому +3

    Haha but can you get it to go over 50mph? LOL Love your videos. You've inspired me to modify a mower. I found a few older ones with 5 and 6 speed transaxles. There's even a really REALLY old Simplicity . Thanks for the inspiration man!

  • @Byron-w2b
    @Byron-w2b 5 місяців тому +2

    I'm in the process of putting a 16hp Briggs and Stratton engine on a John Deere JS46 self propelled Lawnmower frame & trust me, im definitely not going to have them problems your experiencing! But like your efforts though 👍

  • @Justgonnasendit88
    @Justgonnasendit88 5 місяців тому +2

    World’s heaviest push mower 😂

    • @mrbubetube
      @mrbubetube 5 місяців тому

      ya, really. I wouldn't even attempt that unless it was a deck designed for self-propel. I wouldn't want to push that bitch across a high grass field.

  • @printerman99
    @printerman99 5 місяців тому +1

    a walk behind trimmer is so much better than a weed eater

  • @MRshiftyLV550
    @MRshiftyLV550 5 місяців тому +2

    what size pipes do you use for the exhaust on these engines?

    • @99milesaway41
      @99milesaway41 5 місяців тому +1

      Not really any particular size is prescribed for an old twin, pretty much anywhere from 1.25" to 1.75" will work. Once you start really tuning with good carbs and whatnot, you'll need to pay more attention to exhaust and jets, though

  • @deepersweeper969
    @deepersweeper969 5 місяців тому

    Great post! Fun project! I'm mighty glad you didn't trip when you were pulling that monster backwards.

  • @jimda4910
    @jimda4910 5 місяців тому +5

    I can't believe this many people have commented and no one seems to know this point. The blade is designed as a fan that can lift the grass with enough RPMs. get the blade spinning fast enough and it will raise the grass that has been bent over

    • @toxicgracie3772
      @toxicgracie3772 5 місяців тому +4

      No way 😮

    • @thebordernow
      @thebordernow 5 місяців тому +1

      The grass is 3-4 ft tall in this video - how are you going to "lift it" under the mower when it's bent over and actually sticking out the front of the mower?

    • @josephschaefer9163
      @josephschaefer9163 5 місяців тому

      So I should knife edge the back of my blades to make them aerodynamic?

  • @jaypaster8244
    @jaypaster8244 5 місяців тому +2

    Get some goats. 🐐🐐🐐 😊

  • @kunowskyy
    @kunowskyy 5 місяців тому +7

    Bro, your engine has a cool mower, BUT HOLY JESUS HOW MUCH DOWNFORCE DOES THAT MAKE?!

    • @joshmanis9860
      @joshmanis9860 5 місяців тому

      The same as a normal mower. Rpm doesn’t change

  • @cali.delinquent9657
    @cali.delinquent9657 5 місяців тому +1

    Dude was too busy asking if he could that he never asked if he should

  • @RobertFrancis-ir6rh
    @RobertFrancis-ir6rh 5 місяців тому +3

    You have to rent the engine up more for it to cut 4 feet of grass or else it won’t work

  • @Farminggustyt
    @Farminggustyt 5 місяців тому

    Ohyeaaaah a video from MisterDionne

  • @gamerelated3887
    @gamerelated3887 5 місяців тому +1

    The reason why it's not cutting the tall grass is because the deck is so low to the ground that it's pushing the grass flat and the blade can't get to it. What I would do is cut the front of the mower deck off and run a higher stabilization bar between the 2 front wheels. The grass will stay at a much higher angle by the time the blade hits it, and you're good to go!

  • @crash121973
    @crash121973 5 місяців тому

    Sounds freakin AMAZING!!!! 👍🏾

  • @crazidirtbiker
    @crazidirtbiker 5 місяців тому +1

    I have a viewer suggestion. All you need to do is grind the metal off in between the front wheels so there’s a bigger opening on the the deck. It won’t bend the grass over as much. If you did that I bet it would make all the difference. Try it and make another video. It will turn that thing into a brush hog.

  • @GalvanizedSquareSteel891
    @GalvanizedSquareSteel891 5 місяців тому

    That thing is morbidly badass 💯

  • @thebishtable
    @thebishtable 5 місяців тому

    Finally! A practical lawnmower!

  • @ghostfox3560
    @ghostfox3560 5 місяців тому

    A few factors with that just for notes, the reason behind the extra power on idle is the back pressure used to govern the motor is gone, you hear it in the exhaust beat that it sounds like a motorcycle. You touched on the height issue, and yes, that is to be expected when those run pulleys before blades so they have to have extra height.
    The method of entry is another issue, you plowed into the field trying to grab as much as possible. You are not on a zero turn running a 48 inch deck with multiple blades, so do not do that. A single blade mower is intended to cut with about a third to a quarter of it's deck with making the initial cut with the rest for mulching and lifting the grass previously passed. The ideal thing to note is which side of the deck the blades swing forward. That is going to be the side you engage with first. Yours had the shoot on the right had side suggesting that they swing forward from the left had side. Even without the blades being sharpened, you can take down a field at 4 feet with the proper method... And a lot of fuel. Bad case of overcomplicating that job.
    This is an interesting one for seeing someone bring a mower out that can actually be a sight, and sound, to behold. Basically, it will take a couple of days to do it properly with any push mower, just because you cannot overfill the cavity you have where the blade is and expect it to cut ANYTHING! You plowed in and expected a cut patch to be made it would seem. Good idea, bad results. You can still use a mower like that. It's not garbage. Just remember to lead in with the left side 1/3rd of the deck, just above idle, and give the mower time to mulch the grass if you do not lift the right hand side shoot door. It doesn't need more than an average of 3600 RPM to lift grass up and move it. It will take you as long as it takes to have a relaxing walk to mow that area.

  • @Adam-y4i
    @Adam-y4i 7 днів тому

    Idle it up bro!!

  • @shawndubay4050
    @shawndubay4050 4 місяці тому

    I think you have the most powerful push lawn mower on earth. Cuts very nicely. If you want that to cut four foot grass you need to open up the front of the deck just like a bush hog on a farm tractor. The problem is that the mower deck is pushing the grass down before it has a chance to cut it. Look at a Bush hog. The whole front of the deck is open so it can cut whatever it goes over. A push mower is enclosed because it is going to maintain a lawn to about four inches at the highest and a normal lawn is regularly maintained so this isn't normally an issue.

  • @Jackshaft
    @Jackshaft 5 місяців тому

    10:40 Your neighbors must be wondering why you are revving your Harley for hours 😂

  • @MichaelRainabbaRichardson
    @MichaelRainabbaRichardson 5 місяців тому

    Best sounding mower I've heard!

  • @Markworth
    @Markworth 5 днів тому

    Perfect for mowing in April when "just let it dry out" isn't a thing.

  • @BSS22193
    @BSS22193 5 місяців тому +1

    Great to see another fun video from you again! 👍 Please keep it up, by the way this is the coolest push mower i've ever seen!!!

    • @MisterdionneYT
      @MisterdionneYT  5 місяців тому +1

      Thank you very much!

    • @teplonosia420
      @teplonosia420 5 місяців тому

      @@MisterdionneYT try a push mower engine in a riding mower!

  • @Lee01Mr
    @Lee01Mr 5 місяців тому

    Casually enjoying a coffee and hearing this beast from a mile away

  • @IdkDropTopLee
    @IdkDropTopLee 2 місяці тому +1

    "Fully built stroker mower for sale barely used $25,000. DON'T LOW BALL ME I KNOW WHAT I GOT."

  • @jasonslaughter2811
    @jasonslaughter2811 4 дні тому

    When you hooked the throttle up I was super stoked 😊

  • @stubby7934
    @stubby7934 5 місяців тому

    An opposed twin flat-head...cool! Very compact! Sounds great!
    (Obviously I know nothing about ride on mower engines if I didn't know this was a thing)
    You should open up the front of that thing so that you're not pushing down the grass before you mow it.

  • @philipgrobler7253
    @philipgrobler7253 5 місяців тому

    I love the "Harley" beat of this lawnmower!

  • @jasonz7788
    @jasonz7788 5 місяців тому

    The mad Max of lawn mowers thank you sir

  • @CajunReaper95
    @CajunReaper95 5 місяців тому +2

    When your dates at 4 and you only have 30 mins to get the lawn mowed!

  • @Byron-w2b
    @Byron-w2b 5 місяців тому +1

    Man you should have put da big ass engine on a bigger, better and more stabler frame with adjustable height along with a self propelled system & raising the RPM to a more constant workable level for starters🤔

  • @julieanddavidmyers6641
    @julieanddavidmyers6641 5 місяців тому

    Love the twin exhaust pipes!

  • @onmyworkbench7000
    @onmyworkbench7000 5 місяців тому +2

    That's why BUSH HOGS were invented!!!

  • @caribooskidoo3997
    @caribooskidoo3997 5 місяців тому

    Best sounding mower ever!

  • @psycotria
    @psycotria 5 місяців тому +1

    Cut the front of the mower deck, so the blade hits the grass without the mower deck bending it over. Raise the blade even higher.
    I cut a lakefront powerline right-of-way once a year with my $150 mower. Four feet tall? No problem.

  • @MarkMeadows90
    @MarkMeadows90 7 днів тому

    Sounds like a motorcycle. Love it.

  • @nomusicrc
    @nomusicrc 5 місяців тому

    I LOVE HOW YOU START IT

  • @mudpuddle8805
    @mudpuddle8805 5 місяців тому

    Sounds AWESOME, but there is no way I am ever pushing a mower again.

  • @ChiEKKUsama
    @ChiEKKUsama 5 місяців тому

    Very cool! My push mower has a clutch, and when I pull a lever the engine propels the front wheels to help with pushing. Adding something like that into the mower would really help! Or just build a hotrod driving mower.

  • @k.beeler4240
    @k.beeler4240 5 місяців тому

    The grass your trying to cut is taller than the size of the deck so when the mower frame pushes over the grass it's actually keeping the blades from touching it. Cutting out the front of the deck will allow the grass to be cut before the mower pushes it over but it will be extremely dangerous and could throw stuff from the front of the mower deck. That 3 and 4 foot grass really needs a bush-hog to cut it, but if you insist on building something yourself to cut it, I suggest using that twin cylinder Briggs and adapt it to a 28 or 30 inch rear engine snapper blade with add-on high lift fins. They bolt to the snapper blade. Build a strong deck with 4 wheels (2 in the front being casters for turning) and tow it behind the ridding mower. kind of a mini powered bush-hog.
    BTW, mower blades do have safe RPM ranges for different lengths, don't exceed it! Bad things can happen if you do... That's why pulleys and belts are used on mowers. It gives more power for the larger blade or multiple blades, but it also keeps the RPM range for the blades from being exceeded. Also keep in mind, safe engineering is your friend, building something like this can be deadly if you get careless and don't follow certain guidelines when designing. I was in the small engine repair business for almost 30 years. Blade length, spindle shaft diameter, and pulley & belt sizes are all relative to horsepower and RPM's. Have fun, but BE SAFE.

  • @VVK5W
    @VVK5W 5 місяців тому

    Front of the deck is laying the grass over before the blade has a chance to cut it. Open the front of the deck up and it'll cut anything you have the strength to push it through. I did the same thing with a 22" push mower but i used a 10hp. It's the best rough brush mower ever.

  • @JoshJackson13
    @JoshJackson13 5 місяців тому +1

    It needs bigger wheels so it cuts half at the time

  • @3beltwesty
    @3beltwesty 5 місяців тому

    In a tall Field I have ;
    (1) one time 3 decades ago I used an electric hedge trimmer tied to a hand truck.
    This worked well until I hit a piece of scrap barb wire near a fence and that broke the sintered iron gear in the 54 buck trimmer's transmission. Nobody local would work on it. I took the gear box apart and called weedeater and bought a new gear for 8 bucks and a spare for 8 and with shipping it was like 21 bucks. This was before the internet had much searches; maybe just "ask geves" . lol
    (2) many times for 3 decades I have used a 13 amp Black and Decker 18 to 20 inch mowers. Use 12 awg 100 ft cords. Mostly for just 100 ft around a barn; quick to reduced ticks on pants. lol. Eons ago I used 200 and 300 ft of cord and bumped the voltage up to 135 volts with a 20 amp variac.
    (3) Today I often use my string trim mower which cuts faster and has no cord
    (4) In a riding mower I have a old mid 1980s 11-32 Toro that I re engined with a big block 49 cid/ 810 cc V2. That thing cuts rather well.
    Have an extra deck for that mower and might try a disc mower hub and Flail blades as an experiment.
    *** The string trim mower is good in unknown fields; no blades to bend. **** But eons ago when brand new my string trim mower caught a hidden piece of rope and the engine instantly stopped and the internal governor gear broke in the crankcase. ie NO sheared flywheel.

  • @eamh2002
    @eamh2002 5 місяців тому

    9:45 *Honey our neighbour is pushing his Harley in the grassfield again*

  • @mjk9833
    @mjk9833 5 місяців тому

    Bro this is a childhood dream 😂❤

  • @Coffeeblackplease
    @Coffeeblackplease 5 місяців тому

    Best part of my day

  • @GolfSux
    @GolfSux Місяць тому

    Imagine how stoked he would be if someone showed him a weed eater

  • @GregBarrett
    @GregBarrett 5 місяців тому

    700cc trimmer would be an interesting experiment

  • @pbdropshot5369
    @pbdropshot5369 5 місяців тому

    Still sounds better then most Honda Civics.

  • @thomasr.5443
    @thomasr.5443 5 місяців тому

    The sound is insane!

  • @ubertalldude
    @ubertalldude 5 місяців тому

    Ya oughta put exhaust flappers on top since you've got stacks on it!
    Awesome build that thing looks hilarious

  • @petesbeats483
    @petesbeats483 5 місяців тому

    The push mower was probably struggling more because it couldn't eject what it had already cut fast enough.

  • @DallasBurgher
    @DallasBurgher 2 місяці тому

    700cc, I am surprised the grass doesn't just fall down when it hears this beast.

  • @geoffreylee5199
    @geoffreylee5199 5 місяців тому +2

    You had too much fun!

  • @bankruptham2152
    @bankruptham2152 12 годин тому

    U got this. My dad push mowed 12 acres of his new place in Missouri with boulders and high grass everywhere with a normal one. It took awhile but it looked better

  • @alexworrell7723
    @alexworrell7723 5 місяців тому

    Idk how this got on my UA-cam list but Im glad it did!

  • @MichaelWilson-ib9ns
    @MichaelWilson-ib9ns 5 місяців тому

    I dont care if it cuts grass at all. It's still the coolest push mower I've ever seen.

  • @mymusicaccount1456
    @mymusicaccount1456 5 місяців тому

    I love my Briggs opposed twin! I got it out of an old Craftsman t1000 riding mower, then when that died I pulled the motor and put it on an old snapper I bought (Forest Gump style) then it sat outdoors for about 5 years and I put it in a John Deere t100 I bought for almost nothing with a blown motor.

  • @KentuckyFriedFixes
    @KentuckyFriedFixes 5 місяців тому

    LOL! AWESOME! I thought about doing this with a 23HP Briggs V-Twin after viewing that electric push mower ad on the tube. You beat me to it! A+. Though after watching yours cut I think a self propelled mower would be a better option. That thing is super heavy.