Nice job! I have been using Sherwin Williams U9k water (same as octoral) for about 8 months. I have found that it likes the drop coat to be put on more on the drier side. Just noticed you putting it on a little wet. Never the less the Finnished result look 👍
Next time ya think of it, Id like to see a detailed video of how you mask a job exactly like that, specifically from door to pillar, and in the jamb. I always struggle with them, as well as behind the gas door.
Nice job Gunny there's some stunning colours coming onto the market nowadays, especially in the reds. Just had to play catch up on your videos as I ended up in hospital after falling from a scissor lift duùhhh
Hey brother have you used the Reoflex stuff? Is it any good I've got some shipped to me by mistake they told me to keep it. It's the 2k primer...Ive been trying the Upol 2k HS primer what are your thoughts on this brand? It's not really popular and I don't know if there are any issues with it. I did spray the Euro HS Clear and it laid down pretty good compared to Shermin Williams Ultra 7000.
thanks for all the videos gunman! What would be your personal opinion on which gun would give you the flattest finish in solvent based paint no matter the price? Thanks
Hey gunny great seeing you use waterbased paints a little diffrent then solvent 😉 but i was wondering if you could review the finixa spg spraygun my work mate got one and it sprays very good for a 170 euro gun but i am curious how long it will last anyway great video have a nice weekend
Great vid man ,always good info.I struggle to find good masking tape locally but I order from Sprayguns Direck as well are the Colad orange tape that they supply a good tape ?
Yeah man, I like the Colad Orange tape, I have only used it in summer and I do know that the colder weather really does make a difference in adhesion of the poor quality tapes, so I can't say how well it goes in the cold.
Hi havnt been watching for a while still a+++ content learnt so much from you my pro lite is the best best gun ever im just a diyer and it a good all rounder
hay mate iv never used octoral system before, but i use debeer water and use sparlac clear and primer witch i think are nice product im guessing that octoral would be the same?
Hi, I'm the octoral technician in cape Town nice job, this is the best paint and colouristics in my opinion
They called in the big guns!
Man, Waterborne coatings = confidence in your product. That light initial shade is FREAKY!!!
I never get tired of watching Gunman smash on the paint ! 👍
Thanks again mate 👊
The flat air blade hand blowers are a must with waterborne.
congratulations for choosing the Octoral product
Nice job gunny
Great job my friend keeps these vids coming
Great job Gunman, and good looking brand👍👍👍
Thanks again mate 👊
Nice job! I have been using Sherwin Williams U9k water (same as octoral) for about 8 months. I have found that it likes the drop coat to be put on more on the drier side. Just noticed you putting it on a little wet. Never the less the Finnished result look 👍
Probably one of them things I'd suss out if I used more often. Cheers mate 👊
Outstanding job thanks
I use Debeer 900+ it's great!
I like it . Something different mate.. Nice job👍
Standoblue forever!!!!
Good job
Next time ya think of it, Id like to see a detailed video of how you mask a job exactly like that, specifically from door to pillar, and in the jamb. I always struggle with them, as well as behind the gas door.
I think I have a few on my Gunman Raw channel, go have a look through the vids, there's a link to that channel in the description.
Nice job Gunny there's some stunning colours coming onto the market nowadays, especially in the reds. Just had to play catch up on your videos as I ended up in hospital after falling from a scissor lift duùhhh
Damn man, hope you're back to 100% I did wonder where you'd gone
Try Ppg ehp!!! Awesome
Good Gunman
Nice one gunny
Hey brother have you used the Reoflex stuff? Is it any good I've got some shipped to me by mistake they told me to keep it. It's the 2k primer...Ive been trying the Upol 2k HS primer what are your thoughts on this brand? It's not really popular and I don't know if there are any issues with it. I did spray the Euro HS Clear and it laid down pretty good compared to Shermin Williams Ultra 7000.
thanks for all the videos gunman! What would be your personal opinion on which gun would give you the flattest finish in solvent based paint no matter the price? Thanks
Toss up between the T110 pro lite or Supernova WS400, pro lite probably easier to set up.
@@TheGunmanChannel thanks, I might have to pick one of those up
congratulations for your work. I follow your videos. I'm also doing shop and painting here in Brazil.
Thanks for watching mate 👊
Hey gunny great seeing you use waterbased paints a little diffrent then solvent 😉 but i was wondering if you could review the finixa spg spraygun my work mate got one and it sprays very good for a 170 euro gun but i am curious how long it will last anyway great video have a nice weekend
I'll see if I can get one down to Aus
@@TheGunmanChannel i think its an lvlp gun but as far as i know my work mate used it around 25 to 30 psi
I saw a review by tonys refinishing about the octoral 450 clear, turned the booth off and at 10c it still flashed off in 2 mins
Crazy fast
Muy bien saludos desde Honduras 👍👍👍
thx
Nice work..... keep it up bro.....
Hey buddy is octoral as good as Standox? . Looking for a great paint scheme . Cheers buddy. Peace brother
I honestly haven't used it enough to say for sure but I do rate it and lots of others do seem to think it's great.
octoral c500 the best clear ever...
What spraygun are you using for the clearcoat? great job btw
Great vid man ,always good info.I struggle to find good masking tape locally but I order from Sprayguns Direck as well are the Colad orange tape that they supply a good tape ?
Yeah man, I like the Colad Orange tape, I have only used it in summer and I do know that the colder weather really does make a difference in adhesion of the poor quality tapes, so I can't say how well it goes in the cold.
Hi havnt been watching for a while still a+++ content learnt so much from you my pro lite is the best best gun ever im just a diyer and it a good all rounder
hay mate iv never used octoral system before, but i use debeer water and use sparlac clear and primer witch i think are nice product im guessing that octoral would be the same?
Yep, I'm told it's just rebranded.
Can you do a vid on tinting colors or color matching
Greetings gunny!! From Galveston texas..what was the blower thing you hooked up? obviously has to do with the water based system
Yeah, the waterborne paints dry much quicker with some airflow
👍👍👍👍👍👍
Hi I have gti pro lite and i wondered if yoi can tell me what is the best setup for solvent base
I like TE20 1.3 but they all do work
Why are you using thinners for a water based job?
The thinner is in the clear 😬
How can I get a result like that without orange peel?
Smash it on 😜
Basecoat gun?
UA-cam is not notifying me of ur video post.
Hi, Gunny why didnt use DV1 ?
This video was recorded over a year ago
Likeee
man that shit is be you tea full...
Man I can't understand your language
But yet you're writing in the same language😂
Good job