Just got a quarter inch crack today on the bridge so I watched your video bought the kit and it came out darn near almost perfect just the slightest ever hint of a crack you can see
Just one advice, using blade like that you can take out some resin from the chip even after drying. Scrape it from the chip outside and just the chip go left/right and straight blade, not angled. You will not scratch your windshield but it will come out perfect every time
It worked for me perfect. Just a tiny spot now. Key is to not screw down the device too hard & spread the crack more, but just snug enough to let it work properly
Tried it on a windshield that had some long cracks in it. It did not work well at all. I was able to put the applicator over one crack junction and it started to get resin into the crack and then it stopped after about 1/2 of an inch. This kit only seems good for chips with very short cracks. Nothing else.
Just saw this in an addition to your Permatex video...before I pick mine up today, do you have a preference for one over the other now that you have used both? Thanks for the content. Edit...never mind...found it further down in the comments.
Is it Completely invisible now? I have mostly used the permatex windshield kit. It actually completely seals around the chip, and then it applies suction to get the air out, and then the syringe applies pressure. I don't know if I trust this kit as much because it doesn't have the same features.
Okay I went to three different glass shops One will call me back, Two said they could not do it because it was double pane? three wanted $190.00! So I got this kit and did it myself. But I over tightened it, and it broke one leg off the sucked cup.
Bruh, AS SOON AS I WAS HALF WAY THOUGH, IT STARTED RAINING! I'M DONE! Edit: I got it figured out. Just had to wait until the rain passed. Kinda pissed me off though... the FIRST time I did it, the damn resin was washed away by the freaking rain... -_- Anyway, thanks for the tutorial guide my guy. It DID help HUGE. Seriously 👍 thanks, man. 👌
Are you joking or is it real? The last minutes of video, I can still see the crack. Everyone comments as if everything is normal and as if you successfully proved removing crack in the video. The world become really strange place.
@@Ben_Land It was not meant to be rude. It was a man-to-man hope for improvement. You did not show the end results I was hoping to see. If it fixed it show that it fixed it.
Im a visual person and this video helped! Thanks 🙏🏽
You're so welcome!
I had a chip and a long crack and it got cleared it up by like 80%. Your vid helped immensely.
Glad it helped!
Use a lighter or heat gun on the inside. It will suck the resin in, into the crack better
Interesting! I need to try that.
Oooooo
Just got a quarter inch crack today on the bridge so I watched your video bought the kit and it came out darn near almost perfect just the slightest ever hint of a crack you can see
Love to hear it
Just one advice, using blade like that you can take out some resin from the chip even after drying. Scrape it from the chip outside and just the chip go left/right and straight blade, not angled. You will not scratch your windshield but it will come out perfect every time
Thank you!
Hey thank you so much for the video. The instructions were kind of intimidating but your video really clarified it. It was much appreciated.
Thanks for the video! In your opinion, which kit was better? Permatex or this one?
I'd go RainX. IT was easier to manage.
@@Ben_Land Thanks for the recommendation!
Considering that I found him from the Permatax video and now I’ve seen this one, I appreciate this question!
Thank you you video help alot!!! Almost perfect save me 150 dollars
Glad I could help
It worked for me perfect. Just a tiny spot now. Key is to not screw down the device too hard & spread the crack more, but just snug enough to let it work properly
great to hear this!
Tried it on a windshield that had some long cracks in it. It did not work well at all. I was able to put the applicator over one crack junction and it started to get resin into the crack and then it stopped after about 1/2 of an inch. This kit only seems good for chips with very short cracks. Nothing else.
Tips: go inside your car and make sure the resin chamber is over the top of the crack BEFORE you drop in the repair resin.
Thanks. Very helpful.
Great video! Thanks for sharing
Thanks for watching!
does this work on drivers window not the windsheidl
I guess it also takes practice, but I only have one kit and one chip. I wish I had a practice car ands extra kits
I totally get that
you are A HERO!!! thanks
45° angle might yield better results.
Which one work better, rain-x or permatex?
both work about the same. Rain-X was easier tough.
Simple quick and easy thank you!
You bet!
Good job my guy well done!
Appreciate it!
Just saw this in an addition to your Permatex video...before I pick mine up today, do you have a preference for one over the other now that you have used both? Thanks for the content.
Edit...never mind...found it further down in the comments.
Is it Completely invisible now? I have mostly used the permatex windshield kit. It actually completely seals around the chip, and then it applies suction to get the air out, and then the syringe applies pressure. I don't know if I trust this kit as much because it doesn't have the same features.
The permatex one sucks. Made the crack worse. This kituch much better.
Was useful in fixing mine… ty
Glad it helped
Which one is better permatex or rainx?
I like RainAtex
Not sure but I'd THINK that they'd both be ABOUT the same since I'm guessing they both use the same resin...
Pros and Cons to both
4:23 Thr crack was still there... Anyone see how fast the camera clicked off after... LOL
What about air temperature ?
I believe it gives what temp it should be on the package. It's a pretty wide range.
Thanks! 👍✌️😎
Good information 👌
Thanks!
Thanks for the perfect video. Made it so easy. Thanks again!
Okay I went to three different glass shops One will call me back, Two said they could not do it because it was double pane? three wanted $190.00! So I got this kit and did it myself. But I over tightened it, and it broke one leg off the sucked cup.
Oh no! Did it still work?
@@Ben_Land It was on the 2nd chip yes it did work by me hold down the broke side.
Didn’t work for me at all but it was worth a try before buying a windshield
Bruh, AS SOON AS I WAS HALF WAY THOUGH, IT STARTED RAINING! I'M DONE!
Edit: I got it figured out. Just had to wait until the rain passed. Kinda pissed me off though... the FIRST time I did it, the damn resin was washed away by the freaking rain... -_-
Anyway, thanks for the tutorial guide my guy. It DID help HUGE. Seriously 👍 thanks, man. 👌
OF course! Glad it was helpful
😂 same. I’m here in sunny Colorado…except for today.
Flash 😮
video title "how to fix a crack" video content fixing a chip...
Are you joking or is it real? The last minutes of video, I can still see the crack. Everyone comments as if everything is normal and as if you successfully proved removing crack in the video. The world become really strange place.
it's mostly to stop the spread bruh
I tightened the device too hard and my tiny crack started to spread more 🤬
Same thing with me
I'm so sorry!
Looked the same.
shucks
You fix a chip/ in a windshield not an actual crack.
Totally!
💯👈
The professional did not do a good job. Should have watched your video and did it myself.
That was piss poor dude!
Thanks for the loving and kind comment!
@@Ben_Land It was not meant to be rude. It was a man-to-man hope for improvement. You did not show the end results I was hoping to see. If it fixed it show that it fixed it.
Is that andrew Garfield from wish😂🤣
Maybeeee :)