WAN Simulation on VMWare Workstation

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 55

  • @MrMtv00
    @MrMtv00 3 роки тому +1

    Thanks for the video. I've been trying for years to get this to work in a simple manner and with the help of your video I now can!

  • @allien5329
    @allien5329 6 років тому

    thank you mate ... there are many world class tutors ... explaining simple things in complex ways ...... and you did it very simply ...:-)

  • @michaelanthony5799
    @michaelanthony5799 9 років тому

    Thank You! This is exactly what I needed to set up Branch Cache on my VMware network. I have full connectivity on the virtual network as well as connectivity to the Internet. Great Work!

  • @zimmoncastro2710
    @zimmoncastro2710 4 роки тому

    Hello! Thank you for sharing this tutorial. I really appreciate it. Now I can set up my own test WAN network. Great job!

  • @loungeroam
    @loungeroam 8 років тому

    Thanks a lot. I am a novice at network.
    At first the "NY" could not ping "LAX", tried different settings but problem persist. Finally after rewinding the video, I found that both "NY" and "LAX" need to have gateway pointing to the IP of the router on the VLAN side. :)

  • @shrimboy7492
    @shrimboy7492 8 років тому

    Thanks for the tutorials.. just what i needed!!!!

  • @k.chriscaldwell4141
    @k.chriscaldwell4141 6 років тому

    Great! Thanks.
    If using Windows at test VMs, turn off the firewalls.

  • @elnelly16
    @elnelly16 8 років тому

    thank You !! even in 2016 works perfectly.

  • @Siddiqui1221
    @Siddiqui1221 7 років тому

    very good video, solved my problem for win2012 wan lab, many thanks, GOD BLESS YOU!!!

  • @BenGillam
    @BenGillam 9 років тому

    Hi thanks for the video. - I assume the same kind of setup would work on ESXi? Any differences I should be aware of?
    Am looking to learn test and implement DNS across 5 sites we have so setting up a lab to emulate this whilst I work it out would be great

  • @jainjose1515
    @jainjose1515 4 роки тому

    Thanks very much clear.. Good job bro..

  • @thangtrantoan4600
    @thangtrantoan4600 4 роки тому

    very helpful, thanks you very much

  • @vikramkhatri3360
    @vikramkhatri3360 8 років тому

    Very nice. Well explained.

  • @taoli5497
    @taoli5497 5 років тому

    非常感谢分享!!!Thanks a lot.

  • @CrazyHammer9
    @CrazyHammer9 6 років тому

    Man that was kewl. Very nice. Sub'd will keep an eye on channel for sure.

  • @bamshad1986
    @bamshad1986 5 років тому

    good job! btw FREESCO doesn't have dynamic routing feature and you have to use static routing.

  • @amitmanolkar
    @amitmanolkar 4 роки тому

    This was really helpful, Thank you! can we create a DMZ and add a server in DMZ and open specific port on the router?

  • @samuelkanagaraj7829
    @samuelkanagaraj7829 8 років тому

    Many thanks for this excellent tutorial. One thing that was missing is , after we reboot the router we loose all the route configuration that we made.. could you please guide us how to get into "/etc/sysconfig/network" and save the settings permanently? Once again thanks for your help.

  • @GyanSingh-oy6iu
    @GyanSingh-oy6iu 6 років тому

    iN 10.10.0.0 /24 WE CAN MULTIPLE MACHINES now is it possible that they can ping with other machines in 10.20.0.0/24 network as in this case only two machines are able to ping each other ?

  • @tonythorpe8095
    @tonythorpe8095 10 років тому

    awesome demonstration, but when i tried it on vmware 9.0.2 version, it hung immediately i provided the user logging name and the password.
    is there a way out. Thanks.

  • @mihirpatel3754
    @mihirpatel3754 4 роки тому

    Please do the same type of setup using mikrotik routers where you allow internet traffic out and allow outside traffic in.

  • @tanvinhnguyen5178
    @tanvinhnguyen5178 9 років тому

    Can you help me? I want to build a wan similation on VMWare Workstation with Silver Peak. I dont know how to build that :(

  • @kutluakpinar
    @kutluakpinar 8 років тому

    If you wonder why it came out to be 1600 Kbps, but not 1500, you may remember that you need to divide by 1024, not 1000.

  • @heynnertroyo779
    @heynnertroyo779 7 років тому

    It is awesome!!!! Very interesting and usefull video!
    I had to take the time to login, like, comment and subscribe!!!

  • @nilesh.mohekar
    @nilesh.mohekar 8 років тому

    Really helpful!! Good Job!!!

  • @sylvainbeaucheminspersonal372
    @sylvainbeaucheminspersonal372 7 років тому

    Excellent, thanks!!

  • @kalaajaurkalpd4500
    @kalaajaurkalpd4500 6 років тому

    Thank you Arun for this video. Could you please help me on how to save the "route add -net..." command result permanently ??? Waiting for your response!!

  • @gabrielcab
    @gabrielcab 9 років тому

    Nice video, how did you resolve the problem at the ending of the video?

    • @junaidahmad-zs9hp
      @junaidahmad-zs9hp 9 років тому

      happytrigger i would suggest addinng name of server to respective ip in "c:\windows\system32\drivers\etc\hosts" file most easiest way dont forget to open notepad as administrator .

  • @klajdiiii
    @klajdiiii 8 років тому

    You set the subnet of the routers 255.255.255.248 while at the static route you set a subnet mask 255.255.255.0

  • @alancwwong
    @alancwwong 3 роки тому

    is there any virtual switch that i can use in vmware workstation

  • @mihirpatel3754
    @mihirpatel3754 6 років тому

    Great video! Could you post a video with the same type of WAN simulation setup using Mikrotik RouterOS? Thanks in advanced!

  • @karolismargelis9292
    @karolismargelis9292 2 роки тому

    guys, im struglying to convert the exe to flp, any help ?

  • @papu237
    @papu237 8 років тому

    HI, Thanks for this video, it solved my problem in VM Workstation. Could you tell me two things : 1. How to shut down freesco routers ? 2. I found that "route add" command update the routing table & IP traffic routing is ok,but next day when I start all guest machine & routers in VM,it is not working. Again I need to update the routing table with same route add command. Might be I am doing any mistake. Please let me know the solutions .

    • @envyyouu
      @envyyouu 8 років тому

      At the point in the video where i need to add the routes, i receive the message netmask doesnt match route address any ideas ?

    • @papu237
      @papu237 8 років тому

      route add adding whole network.So give network address ,not a specific host/client address.

    • @envyyouu
      @envyyouu 8 років тому

      Thank you this answers my question and it worked, when the video creator mentions a switch that is at each site what would they be using for this or is it just implied ?

    • @envyyouu
      @envyyouu 8 років тому

      I also can confirm that after a reboot the route table resets. Even after saving the settings it still isnt there

    • @teddy-jackmbula6356
      @teddy-jackmbula6356 7 років тому

      freescofaq.hopto.org/6_47_en.html

  • @teodorpelovski5209
    @teodorpelovski5209 9 років тому

    Great video everything is working fine, but at the last step, when i create static route everything hungs, I can only ping the link between two routers (pinging from one of the routers) but I am not able to ping Clients. Clients are not able to ping their own routers too.
    Ignore that, my static route was wrong :D :D you are awesome.

  • @parolvivan9313
    @parolvivan9313 3 роки тому

    thank you Brother

  • @nfsmohi
    @nfsmohi 8 років тому

    can you please help me my NIC not found at all error

  • @MejriThameur
    @MejriThameur 9 років тому

    Awesome !

  • @MyNiceguy22
    @MyNiceguy22 8 років тому

    excellent video

  • @haifa6004
    @haifa6004 6 років тому

    kindly what is Internal Network in vmware

  • @jaiclan
    @jaiclan 10 років тому

    Awesome

  • @AL3X36000
    @AL3X36000 8 років тому

    at the end ot the tut, i got "network is unreachable " on the last step when adding the second route to the second router ! I dont know why :/ anyone can help me ?

    • @AL3X36000
      @AL3X36000 8 років тому

      the first route is OK, but the second one is not . i've followed the tutorial from begening to end , i really dunno what is wrong :o

    • @AL3X36000
      @AL3X36000 8 років тому

      all right ... i misstype the second IP i wrote 198.168 instead of 192.168 . its working now ! :D

  • @SanjeevKumar-hs6gp
    @SanjeevKumar-hs6gp Рік тому

    @busy ping - pls approve my request to access FLP Image

  • @1000mvp
    @1000mvp 8 років тому

    what is root password the router appliance?

    • @papu237
      @papu237 8 років тому

      busyping....

    • @fab2276
      @fab2276 7 років тому

      Hello Suddhasattwa, I'm creating a test lab and your video is very helpful for that. But the password you provided is not working for "freesco" is it changed or it is something else? thanks!

  • @doxiemamazakie1746
    @doxiemamazakie1746 7 років тому

    password root?