Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
Hai dear sir my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners thanks & bestregards vinodhkumar
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier. Put the playback speed as 0.5.. :P
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry. Hope that helps..!!
Quite good and helpful video. however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone. Why is it happening so ?
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line . Help Please Sir
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!! Cheers.
Mugesh Kumar Hi Friend, You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib. This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile. Have a nice day..!!
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly???? This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...
the way ur going fast u will soon beat usian bolt
You can slow down the video under settings.
bro i just started practicing you are my support both morally and over here! thank you for your work ! you are awesome!
Needed this for school. Worked flawlesly. Thanks mate
durges kumar Pandey
It is not possible to upload all videos in Hindi. I am sorry. Please note that English is a common communication language.
dhanaraj6
Thank you very much Mr. Mohamed Shakeel for this useful video tutorial ! There was very simple explained how to draw real thread in CATIA V5. Thank you one more time for this interesting drawing method ! :)
Clear audio + slow clicks helped a lot. Thank you!
Gud mrng sir i have seen all videos of your sheet metal class
I'm very happy for that i learned more from tht
Thank you so much for this video, was a great help. I realized you can also do it the other way round. create the screw with the core diameter and then use a fin command in combination with the helix command. :)
thanks a lot bro.. i was struggling a lot without tree... even my guide dt know this... it was very usefull thank u...
You explain nicely it's just that the watermark in the middle is irritating.
for hex bolt top you can use groove command itself. the power input revolve command takes more time.
Hai dear sir
my self vinodh i am a beginner and i learned catia v5 in one institute but the is not enough . when i searching catia videos i found your video with complete explanation & i was downloaded all videos . so my request is please post the video step by step from starting what are the parameters have to follow. what are the setting has to be do . that will helps all beginners
thanks & bestregards
vinodhkumar
thanks!i like it! i am a new user of CATIA!
i am a beginner and its very useful sir....thnk u
Awesome vid. Speed of the instruction is fine if you're familiar with the tools used the video. Easy peasy. keep it up.
Thanks very helpful 😊
assalamualaikum sir, i am new to catia and m sorry if the question is supid. But the thing is, i hav seen an option named "Thread & Tap" and want to know weather it is there for creating thread or is it something else? If it is a faster option than the one you mentioned here, please do tell me how to use it.
Great video but you go really really fast. Kept having to pause. Could you slow it down a bit? Thanks man! Keep the vids coming
nice tutorial..btw how did you conveniently bring up in-context menus to add constraints after 4:13...thanks in advance!
once you are on the dimension option, just right click inorder to view available sub option for instant constraining..!!
thank you ! happy a nice day~
You are welcome..!!..:)
good video...good information
while making the axis (4:11) try to make the axis line in bluish colour..ie, try to make it aligned.. i got stuck there.. and one simple tip to do it easier.
Put the playback speed as 0.5.. :P
thank you friend, very good your video
Nice explain ..tq bro ..
You are awesome! Keep it up!
It would be very helpful if you go a bit slow sir..
UA-cam offers you an option to select playback speed
Agreed
sir you are awesome at work but it goes little bit fast
if you don't feel then ignore no problem
Thank you sir,
I learn a lot from your videos, requested to upload few parametric modeling videos or if already uploaded pl. share it
this is easy and learnable for me now thank u sensei
I am getting an error that the center curve doesn't lie on the reference surface even though I have placed the point for the helix the same distance from the axis as the radius. Any suggestions on what I can do to fix this? Thank you for the video! Very helpful !
Only one suggestion, Repeat. Sometimes you just have to repeat to get things right..!!
Let me know If it didnt work..!!
Thanks for video!!! But please be sure that user-especially beginner-should match your speed.
Amazing tutorials :D
very nice tutorials, :)
thanks for the tutorial ..!!
Great video thanks!
hey im rajashree.. will you please add a video of designing a car model with designing a single part of it as welll as allover assembly.
can you upload any complicated design which is used in industries.this video is useful
What is the command you have typed in for helix
Thank you
what is the step on 0:38 sec how can you change the full length to 6. kindly rply
it's not hard just constraint one side to 6 and everything shall become so..
ขอบคุนมากมากเลยคับ
Wheres can i find the helix column manually? Without that shortcut bar
How did u bring helix comand in part design
Ur going soooo fast
very helpful
while constructing a reference lie for revolving. i am not able to get the reference line in the correct plane for revolving. i need some help
thanks a lot for this nice video..
kemah demo li
it would be very helpful if you go a bit slow sir.
good practice! I would like to know how you have the sketch features in front of y ?It is hard too making a gear without these in front of y!Also does anyone know why the commands cant work?I have catiavr21
Try these videos:
ua-cam.com/video/nEoZM4HVXLE/v-deo.html
ua-cam.com/video/1A5Z8YGgqYs/v-deo.html
Hi Shakeel, My name is Md Rafiqul Islam. it is helpful video. Would you please upload tool design such as fixture, jig etc in catia v5
what tools you choose unclear
awesome
Nice work :)
Hi M.Shakeel, your videos are a great help for the beginners, I recently Downloaded and started practicing Catia V5, I was practicing that "Threaded Hex Screw" video of yours, i am having some problems and i am not sure if i am not doing it the right way or is it that Catia application that i downloaded, like when i was done with the first ractangle's padding and wanted to make a circle on the lower face the circle was'nt appearing within the ractangle, i had to make a bigger circle the changed the diameter, same problem with the second circle, which is internally tangent to the ractangle, after that when i gave the revolve command in the dialoge box appeared i could not mention the revolution axis, which was z axis, it was not just changing, may be be its some problem with that application, Please any help will be highly appreciated.
why you don't use "thread/tap"?
i have done everything same as u did in video.but at slotting i got a boolean error saying that it cannot be cut until it is constrained,split etc.wat to do? plsss help me mohammed shakeel
+Mohammed Shakeel i have the same probleme and i don't know how to solve
if any body know a solution.
pleaze help us
Why do you use constraint everytime where as you can directly enter value
I am a beginer.How do i create a metric 12 threaded screw?what is the pitch for the thread?
You can refer to this video:
Catia V5 Tutorial|How to Create Threaded Hex Scre…: ua-cam.com/video/G1-Y4R34wwk/v-deo.html
for a video that says for beginners, you click around way too fast
i was thinking the same thing... I have too many questions
sir can i contact with you for more clarification regarding the assembly and part design
can we use shaft instead of revolve?
hey thank u for this video ..... can u please show the elaberated use of extrapolate option on surface work bench
What elaborated use do you need..??, please go to my channel and search for extrapolate command inorder to find more tutorials on extrapolate option..!!
i am getting aproblem while using slot defination.after clicking for reference plane and selecting the circular pad.it is showing an error called feature defination error.it is showing that" the selected sketch contains points defined as standard geometrical elements.you must convert these points into constructional elements"
Please follow the videos once again. If you have any unnecessary points in the sketch, select them and make them construction geometry.
Hope that helps..!!
Quite good and helpful video.
however, when i try to create a nut profile by taking the line at 30degree as you said and use the Groove command it leaves behind only the portion of the head which is to be cut. rest of the screw is gone.
Why is it happening so ?
vivek Inder you need to click on the arrow pointing downwards while using groove
Hi sir...goodmorning
I have a question ?
Can we create exploded view animation in catia v5 r20...?
When i project the circle as shown in video it make a line outside of the hexagon not inside it , due to which it does not take point on the hexagon for plane cutting line .
Help Please Sir
What is the procedure in doing one complete desgin in Specification tree.
thanks a lot bro :) (y)
Why when I select the helix command the part disappears? I simple can't do this without the part. Please help me!
any easy way to get chamfer at edges.If any please let me know
tnx man
can u explain how to make ramsbottom safety valve
Sir please post what are the tools in the CATIA and how to download it
thank you sir.
I have Q i am doing produuction engineering. Can i do job in designing after my engineering.
Catia V5 Tutorial|How to Create Threaded Hex Screw(Easy Steps for Beginners)-Subscriber Requested
At this point I didn't understand. When I'm projecting the circle and drawing a line, that line is flying in the sky with out even touching to the circle. Please explain that one
sir wt u typed to get the chamfer ,it is not clear
It is very fast
Niiice i have an exam soon and im just sooooo stupid when it comes to Catia :'(
Soukaina Belasri baby you are so cute..... where are you from?
CAN U HELP ME TO MAKE MODEL OF A CAR DISC BRAKE, PLEASE??
Very fast explain. So please slowly explaine and work..... Informative video
mrc
I did but its not showing split option
y r u going fast sir.. please slow down
+Joel ManohaR you can change the settings of the videos to slow it down
Really Nigga?
apke piche koi lagga hai jo itna fast karte ho
sir can u plz explain how to design a helcal gear and worm
plz i need it for my project work so waiting for ur videos
You need to make use of the tutorials that are available in my channel. My students have made rockets and airplanes and Lamborghini's using just my tutorials, I am sure if you practice you can do it..!!
Cheers.
What about the profile sketch for Metric Threads
Mugesh Kumar
Hi Friend,
You can create whatever profile you want at the yz plane. Make sure that you give the reference surface while performing rib.
This tutorial is intended to give the users an idea How to give such revolved cut outs around a cylindrical part body wrt a sketch profile.
Have a nice day..!!
Master cam ka koi video bana o v9
Muito Bom!!!!!!!!!!!
what commend for threads
NICE USING SHORT-CUTES
hi thanks for dis
sir how to make drill tool on catia
dear sir plz. upload all catia tutorial in hindi thanks
woah, slow down speed racer. you said this was for beginners. Where's the slow motion button... I'm stuck on the angle for the chamfer on the top of the bolt. It's only letting me change the length of the line I don't see how to set the angle.
Helix command not found
How to get Octogan
sir how to cut groov on shear
sir actually I need ur help in one design
i keep getting an error either boolean operation and feature definition error. someone have any idea to solve this?
Bro, put sweep operation
how to define Arc length in Catia
Why should I create a bolt, where it's exists in the standard libraries, and I can simply insert it into the assembly????
This is first time I watch Catia tutorials, in my opinion for an industrial & Mechanical designs it's so primitive comparing with Autodesk Inventor for example ...