WALL MOUNTED SHAVING SOAP CUP AND BRUSH STAND

If you’re interested in building this project, check out the links below of the items I used in the build (not all items are exactly what I used, but are similar)(affiliate links do help support the channel!):
Laguna 6” Jointer amzn.to/2J2HYxd
Dewalt DW735 Planer amzn.to/3owNmZO
Oscillating Spindle Sander amzn.to/3ouiTM9
Irwin 6” Quick Grip Clamps amzn.to/3kAYW3M
Acid (Glue) Brushes amzn.to/2HDgXzZ
Titebond III Wood Glue, 16 oz amzn.to/3eeP5hT
Festool Router amzn.to/38KGuCC
Dish Router Bit amzn.to/2Uu98TK
CA Glue Medium amzn.to/3mtUnsB
Dewalt 20v Cordless Drill amzn.to/34BrmoS
Japanese Pull Saw Set fave.co/3pDgVJA
Wipe-on Poly (satin) amzn.to/3kDPhcH
Dust Mask amzn.to/2HKbass
Dewalt Safety Goggles amzn.to/3jImhiV
Ear Plugs amzn.to/2HKztGn
Here is a list of other tools in my shop I used (I am not affiliated with these):
Grizzly G0771Z Hybrid Table Saw www.grizzly.com
Here I made a wall mounted shaving cup and brush stand. I made this project from some walnut that I had, and it had a lot of cracks and a good amount of water damage, so I needed to mill it down a bit and cut around some of the major cracks to get pieces that were suitable for the build. The wood also had a lot of sap wood, which I would have liked to eliminate but was unable to in order to get pieces big enough for the build. Since the stand will be mounted in the bathroom, which tends to accumulate a lot of moisture, I used Titebond III for the build. I finished it off with four coats of wipe-on polyurethane.

[@RhinoWorks]

great tutorial, turned out beautiful! 👍

[@AndersenWoodCrafts]

Thanks so much 😊