Це відео не доступне.
Перепрошуємо.
How To Change the Oil on a Honda CBR 600RR Sportbike! | DIY
Вставка
- Опубліковано 4 бер 2016
- Showing the steps involved with changing the oil on a Honda CBR600rr, this should be the same between the 2006-2012 models, very simple and straight forward routine maintenance.
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
#honda #hondamaintenance #best600ccsportbike #hondamotorcycle #diy #doityourself
1. What front & rear brake pads should I order? Any specific brand?
2. What Fork seals should I order? Any specific brand?
Can you also make a video on how to replace front fork seals? As well as how to “flush” your brakes etc etc
I also just got my 2007 cbr600 so excited!
I just got an 08 and replaced fork seals and brake pads and oil change lol, I went to pro caliber and asked them but make sure if you order online that you double check it’s for your 07, I accidentally ordered the wrong year fork seals and they didn’t fit
Don’t not use use motor oil that is meant for cars because it contains moly (friction modifiers) and that’s not safe for motorcycle clutch’s
Awesome video. Just a little tip: Fill the new oil filter with some oil and spread it around the gasket also before installing.
I didn't put any oil in the filter, but I did spread some on the seal.
Bros FOURR Speed great, filling up oil filter before will ensure that your engine doesn't run dry. And btw, love the two brothers exhaust :)
Good Point. And thanks, it sounds awesome!
Not necessary and it would spill out anyway.
i came here for the color of your bike - It looks great!!!
Mines better 😎🤷🏽♂️
Nice Video!! As far as the oil you chose for your bike?? Huge MISTAKE!! That standard oil is GARBAGE!! I ride a 2015 and I PROMISE YOU...the dealership used the same standard oil and within 1000 miles..mi could hear the lifters iny motor!! The following day...I immediately changed oil and of course chose a FULL SYNTHETIC. Bike runs cooler...no more engine noise.
I use full synthetic! Been using it in the bike for 6 years with ZERO issues!
Great video short and straight to the point !
Glad you liked it!
Thank you so simple love it
Glad I could help!
Always take the filter off first otherwise the suction created from the oil draining through the plug locks the filter in place especially if you haven’t changed it for a while or the filter was put on tighter then it should be
Didn't know that. I'll try it. Thanks!
No 🤦🏽♂️
If you watch this video on 2x speed, it feels like watching CW The Flash.
Interesting.
Thanks for the great video. Very informative.
Great video ....spot on and no hassle
Glad you liked it!
Can't wait for my videos of the bike man:)
Thank you for this vid this was very helpful! 😁😁😍
Your welcome!
Hey would you no what color blue is that
Not too sure. I'm sure there are forums out there going over exact color names from Honda
That aluminum foil is a great idea
Works well for sure!
How often do you need to change the spark plugs?
Haven't changed them yet. 25k miles
You put 3 litter oil or 4 litter ?
It takes 3 quarts, that’s what I put in!
Hopefully you haven’t answered this a bunch before. I have the same bike. And have been looking for the Honda blue color match rear seat cowl. Any chance you remember where you got it? I can only find cheap knockoffs with non matching paint
It actually came with the bike! Keep looking, because I'm sure you'll be able to find it!
Which size hex to did u used
Whatever fit lol
Not sure if I mentioned it in the vid. But normal sized things you should have
What oil filter did he buy?
I usually buy Purolator, Mobil 1 or the OEM, just depends on what’s in stock.
@@BrosFOURRSpeed thank u 🙏
1. What front & rear brake pads should I order? Any specific brand?
2. What Fork seals should I order? Any specific brand?
Can you also make a video on how to replace both front and rear brake pads as well as front fork seals?
As well as how to “flush” your brakes fluid etc etc
I also just got my 2007 cbr600 so excited!🎉😊
Anybody use Rotella T6?
Where u get the headlights from ?
These are stock from the factory. I’ve never changed them.
@@BrosFOURRSpeedI might’ve had thought I seen some led headlights on your bike might been another video but great tutorial bro.
yeah mines stock lol
Any reason why you chose to remove the right side of the fairings as opposed to the left (kickstand side)? Wouldn't that remove the 'need' to move the coolant reservoir out of the way?
Nice video, I love my 08 :)
HKMediaChicago I have done it that way and it is easier going from the kickstand side. this was the first change so learning some tricks. I remove both tho for easier access all around.
Ah makes sense, thanks for the reply, bro! Ride safe.
@@BrosFOURRSpeed good to take the whole lower fairings off in one piece...just incase u snap a.join ...another opinion
@@gideonsikk8733 That’s what I do now, it’s easier.
i always wanted a bike, how much do they cost and can you can them with cheap payments?
Brand new a bike like this will be around 10 to 12 grand, but basically never get a bike new. They are so cheap used, a bike a couple years old drops to pretty much half of the value. Definitely not as expensive as you think.
Cory R ohh okay now i have to convince my GF to let me buy one
+Contane 21 You are looking around $5k for a nice used one like this. Check out Craigslist, most r6's and CBR 600's will be around that price.
Honda4RideRed awesome thanks. Will do
Contane 21...I found my bike which is the same year model but mine is the black & silver.I got a really good deal on mine.It only had 6,200 miles on it & I got it for $5,500.And it was garage kept,not a scratch on it.You can find really good deals on a CBR 600RR if you have patience.I looked for a whole year before I got my bike.Sometimes you can find good deals on CycleTrader.com..the only thing is you might have to travel to get one or pay to have it shipped.But me personally,I have to lay my eyes on the bike before I would purchase one.Hope this helps you out.
Can't check the oil level when it's ONLY on a rear stand... it's not level at all.
If the driveway isn't level it works lol, I've been doing it like this since I bought it and it works fine even 4 years later.
It should hold 3.5 quarts
Whatever I put in is what works. I have over 30k miles on this bike now and it's always been solid
Thanks. !
what kind of oil did you use ? thanks
This change was just regular Super Tech...I run full synthetic now and use Penzoil.
Im actually trying to buy this Specific Model an Year it haves 37000 miles on it an wanted to know more Details about high Mileage
John Dillinger under 15k is a good number over that is a little iffy
@@owenlusk4918 Thanks 🍻😎
Don’t buy a bike with mileage over 20k. Every 25k on a bike is equivalent to 100k in a car
can you use any kind of oil I have a 2006 cbr 600
10w40 is required, and I have been running full synthetic now.
Make sure it's motorcycle oil!! Since it's specifically made to lubricate transmission as well and the RPM is much higher on sports bikes than cars.. you can mess up your motorcycle engine putting in oil meat for cars. Recommending motorcycle Mobil 1 racing oil or Castrol T4racing motorcycle oil. More expensive but engine gonna last longer. You can see some videos guys put car oil on bike and engine died...
Rotella T6 5w-40 works well and at a great price!
Think you missed a few things mate. Undo the cap before draining and put abit of oil around the rubber ring on new filter also top up after running it for a few mins if needed
Yeah I talked about that…
just get some brake cleaner an spray the exhaust after
Either way, I’ve been doing it this way till now and it works great.
Hi bros. Is it 3 quartz or 4 quartz?
It says 3, but I usually put in just over that.
Wha oil is best for the cbr 600 rr?
It's pretty much all the same. I now just use Mobile 1 full synthetic motorcycle oil
Rotella T6 5w-40 is a awesome full synthetic and I use it in all my bikes! Meets all the specs for motorcycles and a great price! Rated #1 in motorcycle oil last year!
@@BrosFOURRSpeed they’re not all the same 🤦🏽♂️ HP4 synthetic is the best for the CBR’s
@@jasontodd9302 They really are though, I haven’t used that oil you mentioned and my bike runs just fine.
@@BrosFOURRSpeed saying all synthetic oils are the same is like saying all pizzas taste the same. Order a pepperoni and extra cheese pizza from 5 chain restaurants and 5 real Italian restaurants. They should taste the same right? Because it’s the same thing. Or will they taste different because they are made differently 😎💯🤷🏽♂️
Amsoil, just kidding pouring car oil in. Who cares about the wet clutch.
First of all, this model is 2007-2008 , second this model use 10W30, check that
I said it's a 2007 lol, and 10w40 is what it takes, been using that for four years now!
@@BrosFOURRSpeed read your description bro, model 2006 to 2012 non exist 👌 and for oil you should check the manual 😊
@@Albertogotic They made the CBR between 2006-2012, similar model to this one, they made them before and after those years, but that range is similar, and that's what the manual says for oil..
@@BrosFOURRSpeed I recommend, for future comments, that instead of trying to convince the other person that you are not wrong, you will go through the official Honda website and download the manual for your model year which is 2007-2008(without abs) 2007-2012 model series, I will not try discuss more with you, because you do not reason, and you try by all means to avoid recognizing an error inherent in your knowledge.
I leave you a link with the manual in English and a little italian, because in my country, the official Honda website serves it in Spanish.
Its the page 92
ownersmanuals2.com/honda/cbr600rr-2007-owners-manual-60892
Have a great day friend.
@@Albertogotic lol ikr this guy using wrong oil this whole time
I can't believe this guy is showing people "how to fu*kup your sport bike". Bikes are not like cars! The motor and the transmission are in the same case. This means the fluid has to work as a lubricant for the motor and the gears to shift properly. Car's motors are separated in two cases, one for motor and one for the transmission. So this allows them to hold oil in the motor and transmission fluid in one. This is why they make a special blend of motorcycle oils and the cost is more. But the repair COST WILL BE LESS TO NONE.
I've put over 12k miles on the bike and everything has been fine, it's just a normal oil change on how to do it.
Pretty sure I have your old bike man
Well I still own this bike, so I find that unlikely lol
@@BrosFOURRSpeed ohhh Nevermind 😅 I have the same bike then!
Update on your Genesis please lol
+A.Arroyo Haha, yea we'll get back to some video on them soon!!
You dont hafta take no ferrings off
For the love of Christ lol... supertech in an engine that revs to 15,000 rpm ?
The bike ran completely fine with it for 6 months, I am now running Penzoil full synthetic and will continue with that.
Hi, do you have a bike ? Yet
You dont gotta take no ferrin off or anything else . U made a 5 min job look hard
nooooo why supertech!! lol
Why not? It's all the same and it ran fine while it was in the bike.
Form a funnel
Where?