Glad to see you made the improvements, your support was awesome, I had the gen 1 and had every single one of those issue and you sent me lots of new parts and many many emails. Runs fine now. A great addition would be alarm when it jams/errors, I made one from an Arduino and IR beam.
I think it may be simplified to make a case feeder or modify the dillon case feeder to feed the cases upside down. stick a heating coil at the bottom of the case tube. have a stop that holds the case exposed and hanging out of the bottom of the tube. anneal it then drop it through the coil into the basket. alternately, cut a hole in the current annealer so a case can pass through, flip it upside down. position the tube above it. make the thing that holds the case in position adjustable for height. put a catch on the tube.
For those of you whom don't want to Spend $100 on a Stand, very simple to make one for ~$15 3/4" Black pipe(I had to thin the OD a bit with a belt sander to fit), 3/4" Floor Flange.
Hi Kevin, We sent all of our distributors the microswitch modifications (Which prevent the over annealing) with the instructions to send them to anyone who purchased an AMP Mate. If you did not receive one please send us an email at info@ampannealing.com and will will ship you one directly and also the additional mods mentioned in the double shooting guide.
audio IS lower than most other videos. However, my hearing is poor yet I can hear it fine near the max setting. Sometimes people's SYSTEM volume is set on a lower setting -- you should have a look at your system volume setting.
Mine just showed up. Look forward to getting this sucker set up. Thanks for the great video!
That is without a doubt the coolest set up ever. Gotta do my homework and get this on my bench. You made it look so easy.
It is. Buy ine
Glad to see you made the improvements, your support was awesome, I had the gen 1 and had every single one of those issue and you sent me lots of new parts and many many emails. Runs fine now. A great addition would be alarm when it jams/errors, I made one from an Arduino and IR beam.
These things are sweet. Super easy to set up. 10:10 recommend if you are lazy like me but want good loads
I will be purchasing one very soon 👍🏼👍🏼👍🏼👍🏼👍🏼
Can't wait to hear when Creedmoor Sports has it in stock! Early Christmas present for myself. Ha.
I think it may be simplified to make a case feeder or modify the dillon case feeder to feed the cases upside down. stick a heating coil at the bottom of the case tube. have a stop that holds the case exposed and hanging out of the bottom of the tube. anneal it then drop it through the coil into the basket.
alternately, cut a hole in the current annealer so a case can pass through, flip it upside down. position the tube above it. make the thing that holds the case in position adjustable for height. put a catch on the tube.
I do love me a nice Rube Goldberg device. Seems a little too fiddly, though.
Servo looks a weak when handling the 338 @12:00
Rumour has it it prepares a shooter's breakfast as well while you wait!
Jokes aside,bloody amazing.
For those of you whom don't want to Spend $100 on a Stand, very simple to make one for ~$15 3/4" Black pipe(I had to thin the OD a bit with a belt sander to fit), 3/4" Floor Flange.
Would love to purchase one but the plastic gears make me a little hesitant...anyone have any wear issues as of late?
The one in our lab has done hundreds of thousands of cycles as part of its testing and is still showing no signs of wearing out the gears.
@@annealingmadeperfect1257 that’s awesome. Thank you for sharing this information. Will be buying a whole setup from you guys very soon.
Plastic gears will last just as long as metal gears as long as they are clean and you run them at a cool temp.
need that for my 408 and 6.5CM .. still not possible or?
br
The longest and widest case the amp mate will feed is the 338LM.
You did not send out the over annealing parts as you stated.
Hi Kevin, We sent all of our distributors the microswitch modifications (Which prevent the over annealing) with the instructions to send them to anyone who purchased an AMP Mate.
If you did not receive one please send us an email at info@ampannealing.com and will will ship you one directly and also the additional mods mentioned in the double shooting guide.
How does it cost
It costs really well :-)
We can’t hear him.
Maybe the gen 3 mate will be belt drive. That plastic gear noise gets annoying.
Superb tech but too much $$$ for me.
Hard time hearing the audio even at 100%.
That's strange, are you using headphones or external speakers? it seems fine here.
@@annealingmadeperfect1257 External/internal speaker.
Same here, your audio is waaaay under. Had to use an amp to hear anything at all.
audio IS lower than most other videos. However, my hearing is poor yet I can hear it fine near the max setting. Sometimes people's SYSTEM volume is set on a lower setting -- you should have a look at your system volume setting.
not a good design. overegineerd. poor material choice