LB7 INJECTOR REPLACEMENT (Noob Diesel DIY'er POV)
Вставка
- Опубліковано 7 вер 2024
- This job was long and tedious. Big diesel injectors are no fun to remove. In this video, you will see a glimpse of the job in it's entirety from the POV of me, not a diesel tech...A novice tech at best. I saved myself several thousand dollars here and gained a load of experience which is priceless. If you have done this job yourself, tell me about it below!
*Additionally, I wrapped this video up and quickly after discovered my "low coolant level" issue. As I mentioned the coolant level was okay, however I continuously got the low coolant error. Long story short after completing my injector job I was left with one extra connector unplugged. I also ran into my air conditioning working improperly where the low side would freeze over. I searched this issue in the LB7 diesel facebook forum and discovered I had the low side pressure switch plugged into my coolant reservoir and the coolant level sensor connector not plugged into anything. These plugs are very close to each other on the harness and are easy to get mixed up as they are the same connector type. Double check yours if you experience similar problems after doing your injectors. Especially if everything worked before, chances are, its not a coincidence. *
[References]
Where I got my injectors - www.vfidiesel.... (Call them)
Videos I watched -
• How to removing LB7 Du...
• Duramax injector insta...
• Customer States: FIX i...
• INSTALLED WRONG! Botch...
𝙄𝙛 𝙮𝙤𝙪 𝙡𝙞𝙠𝙚𝙙 𝙩𝙝𝙚 𝙫𝙞𝙙𝙚𝙤 𝙢𝙖𝙠𝙚 𝙨𝙪𝙧𝙚 𝙩𝙤 𝙡𝙞𝙠𝙚 𝙖𝙣𝙙 𝙨𝙪𝙗𝙨𝙘𝙧𝙞𝙗𝙚!
Hit that notifications bell and never miss an upload!
Instagram seen it first 🤷🏻♂️
𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢 - www.instagram....
Babe wake up, E36Tyler posted
Over an hour of struggling 😎
On the return lines seals should have pinched them in tighter so they wouldn’t fall off while lining up the line . Mental note for next time I learned it the hard way
There better never be a next time💯 but thanks!
@@E36tyler I know that’s right lol hate that job
👍👍
Better doing it herself than paying 1-2.5k just for install
Shops around here were quoting more than that!