Royal Enfield 84 Watts Led Fog Lights with Relay | Benefits, Wiring and Procedure | LiveLoveRide |

Поділитися
Вставка
  • Опубліковано 17 жов 2024
  • Hey Guys..
    Welcome back to my channel..
    So finally much awaited video is here..
    you will find out all the procedure, wiring instructions and benefits of Relay installation..
    If you have any doubt regarding this installation do let me know in comment section or do ping me on my Instagram.
    Here is my Instagram handler "LIVNRIDE"
    If you wanna buy this relay here's the link..
    www.amazon.in/...
    If you wanna buy these Led lights here's the link..
    www.amazon.in/...
    Thanks for watching my video..
    Please keep supporting..
    Music Credits:
    www.bensound.com
    Track Name:
    #RelayWiring #RelayforLed #Relayforroyalenfield

КОМЕНТАРІ • 262

  • @zafaradeel2107
    @zafaradeel2107 2 роки тому +2

    Very informative video.I'm from Pakistan and I appreciate your gesture of sharing of knowledge.thanks a lot sir.

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому

      Thanks alot for appreciation sir..
      🥰🙏🙏

  • @s.ksondhiya9427
    @s.ksondhiya9427 Рік тому +1

    Bohat बढ़िया detail hai log kehte hai ki relay lagane se battery par jayada load padta hai pr sahi yahi ki load padta hai par gadi starting problem nhi aati or koi bhi light off kiye bine gadi aram se start ho jati hai thank for information

  • @anupeshsingh9507
    @anupeshsingh9507 4 роки тому +3

    Thank you very much for making this video it was really helpful for me to do the wiring with relay in my Suzuki access 125 . Keep up the good work and once again thank you 😊

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Thanks alot for appreciation...
      😇😇✌️👍👍

  • @aishwaryap
    @aishwaryap Рік тому +7

    DUDE your Aux lights are directly connected to battery & you have bypassed Amp meter that's why its not registering on Amp meter🤦‍♀ Relay is just a simple electromechanical switch & it has nothing to do with reducing the load 🤦‍♀ battery will be delivering same amount of Power no matter what !

    • @Chinmay.__
      @Chinmay.__ Рік тому +3

      This is actually true !! Adding a fuse will just save the wiring which is a + point !!

  • @993jatin
    @993jatin 2 роки тому +1

    Hello, Thanks for the Detailed explanation. I have one question: My std 350 bullet has 12v 5ah battery. Will this setup work on it?

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому

      Yes..

    • @993jatin
      @993jatin 2 роки тому +1

      @@LiveLoveRideRE Did you receive the clamps and switch also with the LEDs or do we need to buy them separately. If so plz share the buy link.

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому +1

      Clamps received with lights and button to be purchase separately..

    • @993jatin
      @993jatin 2 роки тому +1

      @5:52 Bhai Couldn't find the video for putting wires in to the L guard. Can you please share.

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому

      Just drill and put wires into wire sleeves and insert it into leg guard..
      A bit lengthy process but worth.

  • @ujjalbaruah3430
    @ujjalbaruah3430 2 роки тому +1

    Hi agar mene bike ki ignition se relay ka 30 no. pin ko connect kya instead of connecting it to battery positive terminal extra fog light lagene ki liya, or in other case bina relay ka direct ignition se power liya without connecting to battery and relay connection for power the fog lights toh power or battery ka load may diffrence ayega ya dono case May same hoga

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому +1

      Bro direct lagaoge to load aaega battery par..
      New bikes me amp meter nahi aata so kitna load aara hai wo show nahi hoga.
      And relay ko battery se connection isliye dete hain bcoz ignition se connection loge to wires par load aaega.
      So its better k battery se direct current dete hain relay ko..

    • @ujjalbaruah3430
      @ujjalbaruah3430 2 роки тому

      @@LiveLoveRideRE okay 👍
      Thank you Bro

  • @Tommas-nv5dc
    @Tommas-nv5dc 3 роки тому +1

    Hello sir ...i have hero x pulse 12v battery hai usme ... mujhe kitne watts ki fog lights ke liye wiring harness lagana padega ki battery affect na ho & warranty void na ho &
    Autofy 6led 24watts lag jaegi direct?

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому +1

      Bro ab to jo new Led aa rahi hain unke sath wiring harness bhi aati hai..
      Jisme relay and fuses hote hain..
      Simple plug and play system hota hai unka...
      Warranty ka issue nahi aata..

    • @Tommas-nv5dc
      @Tommas-nv5dc 3 роки тому +1

      @@LiveLoveRideRE thanks bro

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Anytime bro..
      😇✌️✌️

  • @visa4you745
    @visa4you745 3 роки тому +1

    sir how much it's longevity i mean relay? where u found thimble for ur wiring? plz tell me.

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Bro relay never dies.
      And thimbles are easily available at hardware shop

    • @visa4you745
      @visa4you745 3 роки тому +1

      @@LiveLoveRideRE thanks a lot.

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Anytime bro..
      😇👍

  • @ankitgoel6sep
    @ankitgoel6sep Рік тому +1

    Brother agar mai 40watt k fog lamp splendor mei lagau to kya chalenge splendor mei 4amp ki battery aati h, battery to drain ni hogi

    • @LiveLoveRideRE
      @LiveLoveRideRE  Рік тому

      Battery par load to aaega brother..
      So its better k relay lagwa lena properly.
      Off bike par na chalana light ko neutral par.
      Baaki koi issue nahi..

  • @laxmikantbhandare3990
    @laxmikantbhandare3990 4 роки тому +1

    Bhaiya mere pass hero CD deluxe bike hain .maine autofy ki 12 smd LED 24 watt ki 2 fog light Aur 6 smd LED ki 12 watt 2 fog light lagayi hain in total 4 fog light ka wattej 72 watt hota hain. to main mere bike ke fog light ke liye roots ka 12 volt 30 amp ka horn relay use kar sakta hu kya ? Mere bike ki battery 12 volt 4 amp ki hain .

  • @faizulluck
    @faizulluck 2 роки тому +1

    Brother me already Relay dal Rakka Hai Horn Ke liye Wahi Relay Se dono chalna si Rehega ya ek Aur new lagao ?

  • @mannatgifts4101
    @mannatgifts4101 4 роки тому +1

    bhai jo apne negative ka connection black wire se kiya hai wo hum bike se earth de kar bhi kar sakte hai ya black negative wali wire sath hi lagana jaruri hai...aur maine drl lagaye h bike pe aur eae hi connection diya hai sb sahi chalte hi..par jaise bike jormal start pe khada h to halka sa bubling khn mehsus hota hai par jb jara si race do to bhut achi light bnti hai...ye jormal hai ya drl pe aisa hota hai...plz tell me
    mere pass pulser 180 hai uspe lagai h

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      DRL par hota hai bhai aisa..

    • @mannatgifts4101
      @mannatgifts4101 4 роки тому +1

      @@LiveLoveRideRE bhai connection to sare sahi hai na...bhai koi budget mein led light btao na online ik mangwai jama hi ghatiya si bhej di puri plastic ki achi quality mein leni h rs bhi jada na ho

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      HJG ki lelo bhai..
      Mene bhi lagwai hai 700 ki..
      Uski video daaluga jaldi he apne channel par

    • @mannatgifts4101
      @mannatgifts4101 4 роки тому +1

      @@LiveLoveRideRE apne online mangwai h to link bhejdo muje ay name bta do light ka.orignal hjg hai kya

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Bhai shop se li.mene..
      Jahan latest video banai hai..
      Gurgaon me..
      Double function led hai..high beam par white low beam par yellow

  • @ajaysinghrajawat8260
    @ajaysinghrajawat8260 5 років тому +1

    Ankush bhai ,bahut shandar video banaya hai ,is vdo se bahut help milegi mujhe leds lagwane m ... samjhane ka tarika aur voice quality bahut achchi hai apki...Thanks a lot bro...and keep it up...

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому

      Thanks alot bhai for appreciation...
      Relay lgane se bahut achha output mila hai bhai..
      😇😇👍👍

  • @anuj.kumarsingh1006
    @anuj.kumarsingh1006 Рік тому +2

    Nice video bhai

  • @MOTOBAWAVLOGS
    @MOTOBAWAVLOGS 5 років тому +1

    Waah bhai sehi se ekdm briefly btate ap... Mza aa jata video dekhke💓

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому

      Thanks alot bhai..
      😇😇🙏🙏🙏🙏

  • @prathameshtalgaonkar8730
    @prathameshtalgaonkar8730 3 роки тому +1

    great info .. but i have 1 que jo ignition connector hota hai headlight ke andar usne 2 point hote hai ek me 12 v ka power ata hai ek me 0 v power hota hai to jo switch ka ek connection andar fir hota hai wo kisme karna chahiye ? 12v ya 0v me

  • @arijitdey4529
    @arijitdey4529 Місяць тому +1

    It's really work .. but feel little beat amp problem when press horn ...

  • @EngineerSingh
    @EngineerSingh 5 років тому +4

    One of the most informative video Of this week.. thanks for uploading brother keep up the good work 👌👌👌👌👌

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому

      Thanks bhai..
      You made my day..
      😇😇😇🙏🙏🙏🙏👍👍

  • @RazVlogsOfficial
    @RazVlogsOfficial 4 роки тому +1

    Bhai yeh white colour fog light ka visibility kesa hey real foggy day me...?
    Kya yeh yellow fog light se better hey kya ??

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Yellow se better kuch nahi but yellow battery par load jada dalti hai.. specially halogen one..
      Yellow me led milti hai to best hai..
      White fog me utna achha kaam nahi karti..

  • @pawansahu576
    @pawansahu576 3 роки тому +1

    Car ke fog lamp ke liye chal jayega
    Aur watt ka hai kitna. Ampere

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Chal jaega bhai..
      Mene 42 watt ki lagai thi

  • @clasherimpossible7645
    @clasherimpossible7645 4 роки тому +1

    Meri bullet me roots horn lage ha relay ke saath aur 90 watt ki 13 projector led lagi ha. Jab me led on krdu high beam aur horn use kru to battery drain hoti ha poori. Kya kru. Kya relay se help ho skti ha

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Bilkul bhai..
      Relay k sath lgwao dono items..
      Fir issue nahi hoga

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Standard model hai kya?

  • @sohailmansoori4030
    @sohailmansoori4030 7 місяців тому +2

    Very good & easy explanation ❤❤❤

  • @NSKeditz.official
    @NSKeditz.official 2 роки тому +2

    Hi brother... really fascinated by your work... would you kindly make one video on how to install relay in 3wired fog lamps

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому

      Thanks brother for appreciation..
      😊😊🙏🙏

  • @TheSamarjit
    @TheSamarjit 4 роки тому +1

    Can I use 60 watt each LED fog lights on pulsar 220. The LED lights comes with wiring harness with already fitted relay and fuse. Will 120 Watt LED lights affect the battery. Please reply sir.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      That will be very heavy light for pulsar..
      Not recommended..
      It will work but effect the battery...

  • @priyajitnaskar5526
    @priyajitnaskar5526 2 роки тому +1

    40w pair fog light kaliye 10amp or 15amp konsa fuse use karna sahi hoga?

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому +1

      10 amp

    • @priyajitnaskar5526
      @priyajitnaskar5526 2 роки тому +1

      @@LiveLoveRideRE okay thank you. 🙏❤

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому +1

      Anytime bro..
      🥰

    • @priyajitnaskar5526
      @priyajitnaskar5526 2 роки тому +1

      @@LiveLoveRideRE please or ak baat batao. Me honda dio bs4 scooter mai pass light switch install kya so ignition couplers k positive se connection liya tha. Agar me or ak connection ignition k positive se leta hu to kohi problem hogi?

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому +1

      Naa koi issue nahi hoga usme..
      Lga skte ho..
      2 se jada mat krna lekin..

  • @shuvadipmaity4532
    @shuvadipmaity4532 7 місяців тому

    sir agar mera fog light me 3 wire hoga(high and low beam) to kyse connection hoga?

  • @mohmmadharun40
    @mohmmadharun40 3 роки тому +2

    sir 24 watt autofy fog light me bhi relay lagwana zaruri he kya.?

  • @mannatgifts4101
    @mannatgifts4101 4 роки тому +1

    bhai yr mere pass 30wat ki 2 fogg lights hai inpe main relay lagai hui h
    aur new lights lagai thi future eye ki do din bad hi ik light mein problam aa gai kya ye relay ki wajha se to nai hua???
    ki power jada deti ho ya jada watt ki lights sath hi relay lagai jani ho plz btaiye yr

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Na bhai relay to proper voltage supply krti hai..
      Light me dikkat aai hogi

    • @mannatgifts4101
      @mannatgifts4101 3 роки тому +1

      light mein dikkat hoti to relay utar k sara kuch sahi kyn chalne lag gya

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Bhai fir aapne connection sahi nahi kia hoga ya relay khrab ho gai

    • @mannatgifts4101
      @mannatgifts4101 3 роки тому +1

      @@LiveLoveRideRE relay hinkharab hui hogi connection ka to badsha hun main

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому +1

      Haan bhai..
      Fir relay he khrab hui honi

  • @Chinmay.__
    @Chinmay.__ Рік тому

    Bro need wiring diagram for this, could not find in your old videos, can you post link ? Exactly which video

  • @agni.goldenforks
    @agni.goldenforks 4 роки тому +1

    One more thing mein apni bike me bosch ke symphony horns install karna chahta hu, kyo usme bhi relay lagani padti hai...???

    • @agni.goldenforks
      @agni.goldenforks 4 роки тому +1

      I wanted to install Bosch Symphony trumpet horns kn my FZ25 ABS, I wanted to know that I need to install seperate relay for this...???

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Yes..
      Install with relay only

  • @hajeemohammed9912
    @hajeemohammed9912 3 роки тому +2

    🙏
    👌👌👌👌 super
    So nice and clear explanation
    Thank you so much 👍

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому +1

      Thanks alot for appreciation...
      😇✌️✌️

  • @3332513011
    @3332513011 3 роки тому +1

    Kya ye process 4 me b same rahe ga ya kuch aur hoga relay ki power kya hona chahiye

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Same hoga process bhai..

    • @3332513011
      @3332513011 3 роки тому +1

      @@LiveLoveRideRE thank you bhai sahab

    • @3332513011
      @3332513011 3 роки тому +1

      Is relay kon sa lena 4 pin me power limit h ya only 4 pin relay

  • @William.L.Khiangte
    @William.L.Khiangte 3 роки тому +1

    Where should i joint the inline fuse? Between 30--battery port right?

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      I have given positive connection from ignition switch..
      So i have connected my inline fuse in between ignition switch ..

  • @sanchay77
    @sanchay77 4 роки тому +1

    Sir Good Video.But my one question.apne earthing dono jayga se liye.ek relly ka aro ek led light ka.kay hum dono earthing same karaga to kuchu problem hoga???

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Koi problem nahi hota sir..
      Laga skte hain..
      Body par he to earthing hogi so koi issue nahi hota..

    • @sanchay77
      @sanchay77 4 роки тому +1

      @@LiveLoveRideRE ok thank u.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Anytime

  • @henminlunsingson
    @henminlunsingson 4 роки тому +1

    Horn relay n light relay are same?? Is there any problem if we give both the earthing together ??

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Both are different..
      Earthing can be given together..

  • @SDB1316Vloger..
    @SDB1316Vloger.. 3 роки тому +1

    Bhai apne reley lagaya hai o 4 wheelar me bhi use kar sakte hai kya

  • @subalsuchdev7321
    @subalsuchdev7321 4 роки тому +1

    I have Interceptor, is it ok to put the lights on, because they have very high wattage, wouldn't they put load on the bike?

  • @basavarajugarkhod2132
    @basavarajugarkhod2132 8 місяців тому

    Liu HJG ka fog light se theen wire aate uska कनेक्शन relay se kaisa karna ?

  • @maheeraiqbal5311
    @maheeraiqbal5311 2 роки тому +1

    Hi ! I really liked your vedio but only thing which I want to know is how to connect 3 way switch with a fog light having 3 wires red yellow and black with relay as yellow is for low point and red is for high point , Please reply to this comment .

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому

      After ground wire Connect both wires together...

    • @maheeraiqbal5311
      @maheeraiqbal5311 2 роки тому +1

      @@LiveLoveRideRE But I think if both get attached to each other then both the high(white) low(yellow) will bright together right

    • @LiveLoveRideRE
      @LiveLoveRideRE  2 роки тому

      Yes

  • @jitu280
    @jitu280 4 роки тому +1

    Sir Honda hornet 160 me relay ke sath leg fog light kese lagaye?plz ap diagram ki imege de sakte hai kya?

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Bhai jaise mene ki hai waise krdo same to same

  • @roninr8199
    @roninr8199 4 роки тому +1

    During water wash if ground wire comes off then what would happen? Will it have effect on the fuse? I have seen videos people connecting 24 w fog light directly to ignition.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Nothing will be happen..
      Don't worry

    • @roninr8199
      @roninr8199 4 роки тому +1

      @@LiveLoveRideRE reason for grounding then?

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Ground it again..
      Earthing is important..
      Light won't work..
      I thought u were saying wire comes out and now what to do..
      Earthing is important without earthing light won't work

    • @roninr8199
      @roninr8199 4 роки тому +1

      @@LiveLoveRideRE might get into problem while water washing? Will there be any impact on fuse for dominor. Thanks for the info 🙏

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Ground it 1st..
      Or don't start bike when washing..

  • @sfa4612
    @sfa4612 7 місяців тому +1

    Nice bro. Detailed process.

  • @ashoksinghnegi5415
    @ashoksinghnegi5415 2 місяці тому +1

    Can we install fuse on this led along with the relay ❤❤❤❤❤

  • @chandradaschaudhary2764
    @chandradaschaudhary2764 3 роки тому +1

    Sar ji kya horn relay use kar sakte hain

  • @subhampanda6940
    @subhampanda6940 4 роки тому +1

    Sir 55w(2) fog light me mane 0.75 ka ware use kia ha to Kuch problem ho sakta hai kya. Relly kitan amper ka use karu.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Koi risk nahi..
      0.75 ka achha hai..
      Relay aap jo.mene use kia wo use kar sakte ho

    • @subhampanda6940
      @subhampanda6940 4 роки тому +1

      @@LiveLoveRideRE Thanks for your information sir.
      0.75 wear jal to nahe jaegito V Gard use kia hu app ne konsi use kaie ha.
      Relly 30 Ampere ka to 110w ka cala paega.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Mera bhi 0.75 mm hai..
      Mechanic to 0.50 use krte hain..
      Isme konsa 240 volts ka current pass hona hai..battery se to current aaega..
      0.75 badiya hai

    • @subhampanda6940
      @subhampanda6940 4 роки тому +1

      Thank you so much for sir

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Anytime sir..
      😇✌️✌️

  • @musicmagic1991
    @musicmagic1991 3 роки тому +1

    Sir ak query tha . Relay se do wire earthing me jayega ?

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Sir mene detail me btaya hai video me ek baar aap puri video dekh lo

  • @terrydepp
    @terrydepp 2 роки тому +1

    Kitne amp ka relay lagega for 120w fog lights in bullet 500?

  • @randhirbharwad7121
    @randhirbharwad7121 3 роки тому +1

    Bhai ye led tata ace me laga sakte hai

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Bilkul laga sakte ho bhai..
      Bike me lag gai to kahin bhi lag jaegi

  • @chhotumurmu8970
    @chhotumurmu8970 4 роки тому +1

    Thank sir for this video.
    Agar dual type fog light use kare classic 350 me to uska wiring kaise hoga? I mean drl+fog light uska daigram samjhaye please with relay, thank you.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Bhai uska bhi same he rhega..
      DRL ka alag se connection kar sakte ho..
      Alag se switch laga skte ho..

  • @Rk-kk2jy
    @Rk-kk2jy Рік тому +1

    Very Nice crystal clear video

  • @swapniltayde09
    @swapniltayde09 3 роки тому +2

    Bhai, awesome video. I have few questions:
    1. How does the indicator blink when the ignition key is turned on?
    2. Can I use this system on halogen fog lamps?
    3. Could you please share the wiring diagram?

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому +1

      Thanks bro for appreciation...
      Indicators blinks bcoz or simtac hazard system..
      You can check video on my channel..
      If you wanna buy same link is available in my that video..
      With coupon code..
      You will get discount too..

  • @compression_combustion
    @compression_combustion 4 роки тому +1

    I have installed 2nos of 55w (total 110W) halogen fog light....the problem is, while in full speed my amp meter is showing almost at the max on green side, if I go more on pickup will end up blowing fuse... Any idea bro..

    • @compression_combustion
      @compression_combustion 4 роки тому +1

      Bro give some idea, if you have faced the same problm..

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Halogen consumes more power...
      Plus stock halogen put more load on battery..
      So its better to remove halogen bulbs nd use yellow led fog lights..

  • @motorhunt1600
    @motorhunt1600 5 років тому +1

    Wowwwwwwwwwwww....
    Amazing video..
    You r d best brother..
    Amazing technique..
    ✌️✌️✌️

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому

      Thanks brother for appreciation..
      😇✌️🙏🙏👍

  • @agni.goldenforks
    @agni.goldenforks 4 роки тому +1

    Do you know how to install relay, LED light and proper wiring in Yamaha FZ25 ABS...???

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Light will be installed same as i have installed in my classic

    • @agni.goldenforks
      @agni.goldenforks 4 роки тому +1

      @@LiveLoveRideRE Ok, but where to put that wire in ignition? How will I find that...???

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Just look for your ignition switch wire clamp..
      Take connection from there..

    • @agni.goldenforks
      @agni.goldenforks 4 роки тому +1

      @@LiveLoveRideRE ok sir. Thank you so much.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Anytime..
      😇✌️✌️

  • @hardeeparora7575
    @hardeeparora7575 18 днів тому +1

    Maine apni 15:10 classic 350 bs 4 bike mai double horn lagaya hai relay ke sat lekin jaise hi mai jab headlight on mai horn bajata hoon to headlight load la rahe hai iska koi solution hai

  • @TarifKhan-lf1hf
    @TarifKhan-lf1hf 5 років тому +1

    Sir
    Mene led headlight lgva rkkhi hai
    Kya usme bhi relay lgegi

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому

      Bhai jo led headlights hoti hain unme already relay aati hai...
      So unme jrurat nhi hoti...
      😇😇👍👍👍

  • @nvvvv7677
    @nvvvv7677 4 роки тому +1

    Can I use 40A/12v dc relay for a 2 fog lamps with total 110watts (55watts per bulb)?

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +2

      Use the same relay which i have used..
      This one is best one to use with heavy fog lamps..

    • @nvvvv7677
      @nvvvv7677 4 роки тому

      @@LiveLoveRideRE what will be the disadvantage if I still use 40A/12v DC relay for my 110 fog lamps which I use in the long run? I am asking you as 30A/12V dc relay was not available . If nothing will happen then I plan to install it for my fog lamp

  • @AmitKumar-py3lw
    @AmitKumar-py3lw 5 років тому +1

    Bahut acchi video bhai main bhi try karunga😊😊😊🙏🙏🙏

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому +1

      Thanks alot amit bhai...
      Bhai jrur try kriye..
      Relay k baad bahut bdhiya output aaya hai light ka..
      😇😇👍👍

  • @mkrishnan31
    @mkrishnan31 5 років тому +2

    Very informative Video Kudos for the effort.But one suggestion i think there should be a fuse box included between the relay pin 30 and the Battery + terminal for added protection.Correct me if I am wrong

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому +2

      You are absolutely right..
      I was looking for a fuse but didn't got one..
      Will fix fuse later..
      Fuse is very important...
      And thanks for watching my video..
      😇🙏👍👍

    • @mkrishnan31
      @mkrishnan31 5 років тому +1

      @@LiveLoveRideRE Sure please include that ;) Also wishing you Many more miles on your ride and your UA-cam channel Keep going :)

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому +1

      Thanks alot for appreciation...
      Your words means alot..
      😇😇🙏🙏👍👍👍

  • @chindhichomu3982
    @chindhichomu3982 3 роки тому +1

    Bro good one, to the point, perfect video

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Thanks alot bro for appreciation..
      😇🙏😍👍

  • @navinbabji
    @navinbabji 4 роки тому +1

    bhai ek dum mazaa aa gaya yaar video dekh kar, kisi bhi youtuber ne itni clearly explain karte hue video nahi banayi hai abhi tak....bas ek sawaal tha aapse, kya yeh same Standard Bullet mein bhi lagaya jaa sakta hai???

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Thanks alot bhai for appreciation...
      Bilkul bhai.
      Same way me standard me bhi lagaya ja sakta hai..
      Standard kya kisi bhi bike me laga lo same tarike se aap..

    • @navinbabji
      @navinbabji 4 роки тому +1

      @@LiveLoveRideRE Thank you bhai, accha jo thimbles hai woh relay ke saath mein aate hai ya phir aapne separately liye the electricial ki dukaan se.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Bhai alag se liye the...
      Sath me kuch nahi aata ...
      Thimble achhi quality wale lena bhai..
      Copper k..
      Dusre wale rust le lete hain

    • @navinbabji
      @navinbabji 4 роки тому +1

      @@LiveLoveRideRE oh ok, thanks bro...🙂👍

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Anytime bro..

  • @akashkundapur7256
    @akashkundapur7256 4 роки тому +1

    Sir super Video 📹...
    I need one help I want to install fog lamp in bike with one switch for on and off,, and fog light should on when I press pass light switch also please help me

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Thanks for appreciation..
      For that you have to give connection from LH switch assembly to fog light..
      But i will suggest you to not do such connection..
      It will put extra load on switches and battery..

  • @rajendersinghrawat1089
    @rajendersinghrawat1089 2 роки тому +1

    Hi. Wanted to know what wires did you use for installation.

  • @rohanpawaskar1960
    @rohanpawaskar1960 2 роки тому +1

    Bro mere mechanic ne direct ignition se current liya without relay. Magnetic coil jal gaya

  • @sukhmotovlogs1322
    @sukhmotovlogs1322 Рік тому

    3way switch k sath 3way led ki wiring k liye relay ki wiring kaise hogi

  • @ExoticRiders_TV-shorts
    @ExoticRiders_TV-shorts 3 роки тому +1

    Kitna mm wire lagta hy..

  • @anchitgupta007
    @anchitgupta007 5 років тому +1

    Very information..!! 👍 But is this light with 6 manth warrnti?

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому +2

      Yes bro...
      This is allextreme led lights with 6 months warranty...
      Mene link dia hai description me..
      Dekhiye aap..
      Usme warranty mentioned hai..
      😇👍👍

    • @anchitgupta007
      @anchitgupta007 5 років тому +1

      @@LiveLoveRideRE okay genuine product 👍👍😇🙏

    • @LiveLoveRideRE
      @LiveLoveRideRE  5 років тому +1

      Ji bhai...
      😇😇👍👍👍🙏🙏

    • @pranjalpankaj
      @pranjalpankaj 5 років тому +1

      जे गुरुजी

    • @anchitgupta007
      @anchitgupta007 5 років тому +1

      @@pranjalpankaj जय गुरु जी इट्स जट भाई।

  • @amitisgame
    @amitisgame 4 роки тому +1

    ek no. brother

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Thanks alot brother for appreciation...
      😇🙏👍👍

  • @jassekhpuria5165
    @jassekhpuria5165 Рік тому

    sir how can we install this in platina

  • @rahulgupta0106
    @rahulgupta0106 4 роки тому +1

    My relay fell down which comes with harness. I have installed two 40 w led lights.

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Always tie relay securely..
      Install new one if you have lost previous one..

  • @MUNDODIVLOGS
    @MUNDODIVLOGS 5 років тому +1

    Superb bhai !

  • @amanKumar-sx4xu
    @amanKumar-sx4xu 4 роки тому +1

    Great detailing

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Thanks alot for appreciation..
      😇✌️✌️

  • @ajitharrhenius691
    @ajitharrhenius691 3 роки тому +2

    This connection worked fine. But in my bike it ate my battery's charge for which I had to change my battery at some point. Relay was always energised even if I had disconnected the battery terminal. 😔

  • @Sukhvir_Rider
    @Sukhvir_Rider Місяць тому +2

    thnku boss..

  • @m_properties
    @m_properties 4 роки тому +1

    nice informative video..

  • @saaksharskill432
    @saaksharskill432 4 роки тому +1

    Good explanation bro.
    Keep it up

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому +1

      Thanks alot brother for appreciation...
      😇👍🙏🙏

  • @omkarbhosale3822
    @omkarbhosale3822 7 місяців тому +1

    If you want to consume heavy watts from battery and don't want to burn bike wires then relay is used.

  • @anonnymous59
    @anonnymous59 3 роки тому +1

    Nice

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Thanks alot for appreciation..
      😇✌️✌️

  • @sanskarisumit1974
    @sanskarisumit1974 4 роки тому +1

    Woow sir

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Thanks alot for appreciation..
      😇✌️✌️👍👍

  • @sulochanasandra425
    @sulochanasandra425 Рік тому

    for 1week it worked but all of a sudden my bike stopped, not staring at all,no ignition neutral light,no power from battery, n immediately disconnected all wires then bike started.

  • @TheSonanyc
    @TheSonanyc Рік тому +1

    👍

  • @gunjantayade8100
    @gunjantayade8100 3 роки тому +1

    Brother aap wo video banaye jo aap switch on karne par indicators on hote hai 12:06

  • @avinashpawar1445
    @avinashpawar1445 Рік тому +1

    Himalayan ke liye aisa haein hain

  • @786vakilkhan
    @786vakilkhan 4 роки тому +1

    60w + 60w fog light ke liye kese relay wiring lagana chahiye

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Jaise mene lgaya hai bhai same lagega

    • @786vakilkhan
      @786vakilkhan 4 роки тому +1

      @@LiveLoveRideRE fuse ka use kare ya nhi or agar kare to kese

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Bilkul kar sakte hain bhai..
      Battery se jo wire loge uspe laga do..
      Ya ignition se jo loge uspe fuse lagao

    • @786vakilkhan
      @786vakilkhan 4 роки тому +1

      @@LiveLoveRideRE thank u Bhai for your information and kindness

    • @786vakilkhan
      @786vakilkhan 4 роки тому +1

      Kuch Dino se fog light wiring ka vedio search kr rha tha but ab right information mil gaya,ab no tension,thank u👌👌👌💯💯💯

  • @piyushpanchal8369
    @piyushpanchal8369 4 роки тому +1

    Thanks sir

  • @naveennm05
    @naveennm05 9 місяців тому

    Brother, you are wrong, you just Bypass the ammeter, then how you know the LED,S current

  • @niteshkhatri617
    @niteshkhatri617 5 років тому +1

    Waaw

  • @fncsuk20066
    @fncsuk20066 3 місяці тому

    Brother ye relay lagane se right fuse nhi hota ❤

  • @786vakilkhan
    @786vakilkhan 4 роки тому +1

    Bhai ek help chahiye thi

    • @786vakilkhan
      @786vakilkhan 4 роки тому +1

      FZS V2 bike me led headlight lagane ke liye AC to DC connection krna hai,pls bta sakte hai kese kare?

    • @LiveLoveRideRE
      @LiveLoveRideRE  4 роки тому

      Bhai better k aap mechanic se krwa lo..dikkat ho jaegi wiring krte time kuch na kuch

  • @inshitasuryavanshi2248
    @inshitasuryavanshi2248 Рік тому

    bro tu 12:49 direct power battery se le raha hai esleye amp. meter reading ni de raha , +ve wire amp. meter ke output se le kar dekh

    • @Chinmay.__
      @Chinmay.__ Рік тому

      Wahi soch raha tha me bhi then i realised, ye same cheez uncle ko samjh nahi aaya and dusro ko misguide kiya

  • @rithiksharma91
    @rithiksharma91 3 роки тому +1

    Yeh chinese lights hai

    • @LiveLoveRideRE
      @LiveLoveRideRE  3 роки тому

      Indian konsi hoti hain btana bhai..
      🤣🤣🤣
      Sab china se he to aata hai..

    • @rithiksharma91
      @rithiksharma91 3 роки тому

      @@LiveLoveRideRE 🤣🤣🤣🤣

  • @kadarsakarwala4473
    @kadarsakarwala4473 4 місяці тому

    Load to padta hai bas dikhta nahi hai