Sir agr battery se connect Kiya aur ignition key me bhi wire kyu connect karni padti hain? Sidhe battery set connect hain to bhi lights on ho sakte hain na
It looks good but do you have a harness for aux lamps with 3 wires.. i.e. for the LED aux lamps that have Yellow and White led's in each unit.. please share the link if its available..
Greetings! Yes we do have a wiring harness for Dual color fog lamps for motorcycles and cars. Plz check it out here, vaishnu.com/product/fog-light-wiring-kit-for-high-low-beam-aux-lights-for-bikes/
Greetings! The Earth wire can be connected to the negative terminal on the battery or any Bolted points on the bike which can provide earthing to the cable.
Everything is fine but I am using a fog lamp which has 2 colors white and yellow but you're providing only a single switch button which can be used only for yellow or white not for both? Then what is the soluation?
@@wasimsaifi7684 Greetings! This is only a single color supporting wiring harness. If you want to use a dual color fog lamp then we have a different harness compatible for that purpose. You can find part no 4102 listed on our website suitable for your application. Regards
Greetings! Harness protects your Bike’s original wiring Harness in cases where your fog lights malfunction or due to improper connections there’s a short circuit. You install with Harness, it will prevent all of these scenarios and if you install directly any fault will end damaging your Bike’s complete harness or may end up causing a fire. Wiring harness is a small insurance to protect your bike and yourself from any major accidents.
Greetings! Female connectors are part of the wiring harness. We provide extra male connectors to make the setup complete and for you to connect to any fog lights with single color operation.
Plz upgrade your fog light at 3 in 1 colour light,apka head light 3 in 1 colour ka bohut acha he,so new fog light 3 in 1 ka create ki jiye i am waiting that product plz team vaishnu plz
I fitted my aux light today and the fitter man has fitted ignition cable into fuse box in between fuse where fuse of headlight is … is it safe to? Right or wrong
Battery low signal showing in pulsar 150 meter with HJG for lights 60 watts *2 with night eye led bulb in headlight ...kindly help/ suggest... Low battery indicator doesn't show with one one hjg fog lights .... Kindly recommend soultion
Greetings! We have an advance version available with upgraded switch. Wire routing was done below the tank from the sides. It can be easily done on certain models otherwise you can remove tank and wire them along the chassis.
Greetings! It depends on a lot of factors. Regardless, you should always install auxiliary lights using a wiring harness which serves Many benefits to save your Bike’s electrical system.
@@JeetChowdhuryi installed this lights without harness bro..my stock battery was dead.new battery is drain many times..will this harness prevent from battery drain problem?
I have your fog light wiring harness. The relay had gone bad and i have raised the issue on your wats app contact no. But no response. Let me know from where I can buy another relay?
Apka 3 in 1 ka headlight lagane se koi fog light jarurat hi nehin he wo itna quality light provide karta he but logo ko kuch fashion chahiye fog light bike me lagane se aur khub lagega so telling you team plz start Karo
No Sir! In terms of Legality, No Vehicle is Supposed to be using any Auxiliary Lights in the City Limits wherein the Combined Wattage of the Fog lights is above 60 watts. Although you can be also fined in City Limits for any Lights which do not come as Factory fitted, depending on the Cops Mood. Our Thunder Series Lights are rated at 70 Watts/ Pair and are strictly for Off Road/ Highway usage. The real need of the Auxiliary Lights are away from the city anyway. In that sense, these will fulfil the Purpose and legality is taken care off by Covering the Lights when in city limits. Hope that was Helpful, do get back for any more Queries. Thanks
@@RovingRevs It will be Compatible with any Bike having at least 5 amps of Battery Specifications. If the Dominar has anything equivalent or above it, It is compatible for sure.
Greetings! Battery draining issue is associated only to the electrical load of the auxiliary lights/ other accessories installed on the bike. The harness only transfers current to the auxiliary lights, how much or how less suitable for the battery is dependent on the lights being used. So if you are having battery draining issues check the total electrical load of all the accessories on the bike.
Honestly these are the worst harness I have ever used. The connecting material is of low quality, making it disconnect from lights. I'm going to remove these and use a bit costly one with good quality
@@sidwithstuffs Greetings! It would be better if you could reach out to our customer support team and share your problem who will help to provide a solution for this rather than just leaving a comment which is not going to help your cause.
Maine aj he lagya hain Amazon se order Kiya tha good product ❣️
Sir agr battery se connect Kiya aur ignition key me bhi wire kyu connect karni padti hain? Sidhe battery set connect hain to bhi lights on ho sakte hain na
Great Demo! Highly recommend this product!
Excellent Quality, Fit and Finish.
It looks good but do you have a harness for aux lamps with 3 wires.. i.e. for the LED aux lamps that have Yellow and White led's in each unit.. please share the link if its available..
Greetings! Yes we do have a wiring harness for Dual color fog lamps for motorcycles and cars. Plz check it out here, vaishnu.com/product/fog-light-wiring-kit-for-high-low-beam-aux-lights-for-bikes/
Where I will connect earthing wire
Can you guide about earthing wire
Greetings! The Earth wire can be connected to the negative terminal on the battery or any Bolted points on the bike which can provide earthing to the cable.
Everything is fine but I am using a fog lamp which has 2 colors white and yellow but you're providing only a single switch button which can be used only for yellow or white not for both? Then what is the soluation?
@@wasimsaifi7684 Greetings! This is only a single color supporting wiring harness. If you want to use a dual color fog lamp then we have a different harness compatible for that purpose. You can find part no 4102 listed on our website suitable for your application. Regards
Where from did you get the cover for light ?
Is harness necessary to avoid warranty void with company?
What is the purpose of harness when aux lights can be installed without it?
Regards
Greetings! Harness protects your Bike’s original wiring Harness in cases where your fog lights malfunction or due to improper connections there’s a short circuit.
You install with Harness, it will prevent all of these scenarios and if you install directly any fault will end damaging your Bike’s complete harness or may end up causing a fire.
Wiring harness is a small insurance to protect your bike and yourself from any major accidents.
Can You please make a video on the dual Fog light wiring harness i.e product code- 4102
I bought it and installing today , will provide my review
Glad to hear.. looking forward to it!
How is your Review ?
@@Rahulm17 So far so good completed 2500 Kms
@@unboxingdiary304battery drain problem bro?
Do you guys make for passsing switch to fog light with flasher????
Greetings! We don’t manufacture flashers as majority of riders misuse the feature and cause obstruction to oncoming traffic.
Very good information👍👍👍
Whmy fogg lamp has 3 wires.. white and yellow lights do I need to buy another for that
Greetings! Yes our model no 4102 and 4110 is suitable for your fog lamps. Plz check our website www.vaishnu.com
Do u give extra female connectors as told in this video with product 2104
Greetings! Female connectors are part of the wiring harness. We provide extra male connectors to make the setup complete and for you to connect to any fog lights with single color operation.
@@vaishnuautolightingsolutions thnx for Swift reply
Can I change red switch. I have black switch already.
Greetings!
Yes its doable.
How it will work with hjg mini which have 2 mods white and yellow lights
Greetings! You have to order our wiring harness model no 4102. This wiring harness is only suitable for single color mode fog lights.
Plz upgrade your fog light at 3 in 1 colour light,apka head light 3 in 1 colour ka bohut acha he,so new fog light 3 in 1 ka create ki jiye i am waiting that product plz team vaishnu plz
Greetings! Thanks for your valuable feedback.
Already in my Amazon wish list.. but please do a video on Aerox
I want to buy for Himalaya n bs3. Is it support
Greetings! Yes it is compatible.
I fitted my aux light today and the fitter man has fitted ignition cable into fuse box in between fuse where fuse of headlight is … is it safe to? Right or wrong
Greetings! That works, no issues with that.
Price
Battery low signal showing in pulsar 150 meter with HJG for lights 60 watts *2 with night eye led bulb in headlight ...kindly help/ suggest...
Low battery indicator doesn't show with one one hjg fog lights ....
Kindly recommend soultion
Bhai Kya battery drain horaha hai..??
sAme with me without harness. Is it with harness or without?
switch aesthetics are sub par, wire routing was not shown below the tank
Greetings! We have an advance version available with upgraded switch. Wire routing was done below the tank from the sides. It can be easily done on certain models otherwise you can remove tank and wire them along the chassis.
While on ride My Fog light draining the battery.....should this kit will help me or Not..???
Greetings!
It depends on a lot of factors. Regardless, you should always install auxiliary lights using a wiring harness which serves Many benefits to save your Bike’s electrical system.
Will 120W (60w x 2) fog light supported by this harness?
Greetings! Yes sir, this harness can support 120 watts of load easily.
This makes battery dry....connecting frm battery directly.....any one facing tiz issue
@@MyKarankk my previous battery goes dry and wiring have some issue with previous hlj harness... No issue till now with this harness...
@@JeetChowdhuryi installed this lights without harness bro..my stock battery was dead.new battery is drain many times..will this harness prevent from battery drain problem?
@@yuva9323 i am using harness now, no issue after using harness...
I have your fog light wiring harness. The relay had gone bad and i have raised the issue on your wats app contact no. But no response. Let me know from where I can buy another relay?
Greetings! Kindly connect with us on whatsapp @ 9871301846.
We’ll resolve the issue Asap.
Very helpful video .
Can I use this for Triumph Tiger 900?
Yes sir! It’s a universal product.
Bro plz video do on himalayan bs6 bike
Greetings! Installation is same for all RE motorcycles besides few little changes. You can visit a local mechanic if you need help with installation
Muje 160w focus chaiye
Very good instructions but why the loud music blasting all the way through? Very distracting!
Greetings! Point noted for future videos, Appreciate you sharing your feedback.
Que tanto costaba grabar la parte frontal , ya lo había hecho todo 😂
This kit including flasher ?
No sir!
We do not manufacture flashers as its dangerous for on coming traffic.
Great quality product
Can I install it aprilia sr 150 ?
Greetings!
Kindly check the battery specification of the aprilia to be of 12 Volts. It is compatible with a 12 Volts battery of any bike/ Scooty.
@@vaishnuautolightingsolutions Yes 12v ....
@@sounakdas5002 you can use the wiring kit then..
Apka 3 in 1 ka headlight lagane se koi fog light jarurat hi nehin he wo itna quality light provide karta he but logo ko kuch fashion chahiye fog light bike me lagane se aur khub lagega so telling you team plz start Karo
Installed it yesterday, not working, will try again today.
Greetings! Kindly contact our customer support team in office hours for any support regarding installation.
are these lights legal in terms of wattage?
No Sir! In terms of Legality, No Vehicle is Supposed to be using any Auxiliary Lights in the City Limits wherein the Combined Wattage of the Fog lights is above 60 watts. Although you can be also fined in City Limits for any Lights which do not come as Factory fitted, depending on the Cops Mood. Our Thunder Series Lights are rated at 70 Watts/ Pair and are strictly for Off Road/ Highway usage. The real need of the Auxiliary Lights are away from the city anyway. In that sense, these will fulfil the Purpose and legality is taken care off by Covering the Lights when in city limits. Hope that was Helpful, do get back for any more Queries. Thanks
@@vaishnuautolightingsolutions thanks for replying.....that mean if I put cover on those while riding in cities there will be no problem.....right!!!
@@RovingRevs True Sir! Also a word of advise would be to mount the Auxiliary Lights below headlight level for a completely trouble free experience.
@@vaishnuautolightingsolutions ok..thanks...now the big question.....will it fit in my dominar 400 2020 model
@@RovingRevs It will be Compatible with any Bike having at least 5 amps of Battery Specifications. If the Dominar has anything equivalent or above it, It is compatible for sure.
Will it work with duel colour light
Greetings!
We have a different wiring harness for that purpose. You can checkout our model no 4102 for that purpose.
Battery draining issue....
Greetings!
Battery draining issue is associated only to the electrical load of the auxiliary lights/ other accessories installed on the bike.
The harness only transfers current to the auxiliary lights, how much or how less suitable for the battery is dependent on the lights being used.
So if you are having battery draining issues check the total electrical load of all the accessories on the bike.
@@vaishnuautolightingsolutions using night eye led bulb in headlight and 80watt hjg fog light with your harness
@@mayankshukla7587 you also need to share any other electrical accessories on the bike and the battery ampere of the bike.
Honestly these are the worst harness I have ever used. The connecting material is of low quality, making it disconnect from lights. I'm going to remove these and use a bit costly one with good quality
@@sidwithstuffs Greetings! It would be better if you could reach out to our customer support team and share your problem who will help to provide a solution for this rather than just leaving a comment which is not going to help your cause.
High and low beam avaliable in this harness?
Greetings! We have a different harness for the application. Model no 4102 on our website.
Price