Though you do not need to heat the oil cuz the oil has already drained to the bottom. Plus you shouldn’t loosen any nuts bolts and than start the engine, first their is slight back pressure me not advisable. Back engineering practice, do that with big engines and it will disastrous. Last never clean components with gasoline, use cleaning solvents. Don’t be a backyard mechanic but be a good technician. And you removed the 3rd strainer therefore, 1.5 L s recommended w/o removing the 3rd strainer. You need to add before checking. Which you did after checking but if you did it before, you would be on top of it the first time. Always start you engine with no bolts lose.
Ung pre heating sa makina, done and tried it. pero if you analyse the process di siya advisable kasi ung ibang oil nasa taas nanaman ng part sa makina embis na naka settle down na lahat sa baba. And for the info sa lahat Gasoline used for cleaning seals(rubber) can wear or damage it. bad advise, just use clean cloth or towels. Sana mabasa mo boss just helping you with some bad practices.
Paps Hindi Kaya Yung dahilan bat may oil pa Jan na natira Sa "third filter" eh dahil Sa Naka paddock stand ka...? Kase Si dominar ehh NASA gilid talaga Yung drain port Ng oil gawa Ng Wala nga centre stand ,nakatagilid sya ...pwede patry paps na Naka side stand ka Lang mag change oil Kung may tutulo pa Kaya Sa "third filter"
Ano tawag dun sa nakalaylay na cable nung tinanggal mo engine cover... sa manual sir 1.8L total engine oil capacity ni dominar kung total drain(yung kasama sa babang drain plug) kulang ata ng 300mL nilagay mo na oil ?hehe
Hose yung nakalaylay, connected sa fuel tank. Drain para sa overflow or tubig if ever. 1.5L initial na kinarga kong oil plus top up around 300ml. So 1.8 din lahat.
Approximately 1.7 to 1.8 L basta maabot po yung tamang oil level. Sa engine oil window po ako lagi nagbabase sa oil level, gaya po dun sa ginawa ko sa video.
Thanks sa tips sir.saved videos muna kapag ako na ang mag diy change oil after matapos free pms/maintenance warranty ni dominar sa casa
Though you do not need to heat the oil cuz the oil has already drained to the bottom.
Plus you shouldn’t loosen any nuts bolts and than start the engine, first their is slight back pressure me not advisable. Back engineering practice, do that with big engines and it will disastrous.
Last never clean components with gasoline, use cleaning solvents. Don’t be a backyard mechanic but be a good technician. And you removed the 3rd strainer therefore, 1.5 L s recommended w/o removing the 3rd strainer. You need to add before checking. Which you did after checking but if you did it before, you would be on top of it the first time.
Always start you engine with no bolts lose.
Mr so.. Nice content
Ganda ng content na to. Madami matutulongan nito sir
Thank you paps!
@@maningmotour4717 dami pang natira sa drain cap sa ilalim
Kaya nga paps, need din talaga kalasin para drained lahat ng used oil.
9:53 3rd oil drain
Que tipo de aceite le pones a tu dominar 400 ful sintético o semi sintético o mineral saludos 🙏
Ngayon ko Lang nalaman na Meron pa palang oil strainer dun sa center Ng makina.
nice 👍 money saver... but where did you dispose the used oil ... we have to be responsible for our environment 😉... God bless .
I always store the used engine oil on the container of the new oil. Then we use it on our kuliglig.🙂
Anong 3rd filter????
Ung pre heating sa makina, done and tried it. pero if you analyse the process di siya advisable kasi ung ibang oil nasa taas nanaman ng part sa makina embis na naka settle down na lahat sa baba. And for the info sa lahat Gasoline used for cleaning seals(rubber) can wear or damage it. bad advise, just use clean cloth or towels. Sana mabasa mo boss just helping you with some bad practices.
Every how many kilometers ka bago magchange oil sir?
2000-3000kms sir.
salamat sa info paps, +1 here. Rs ka domeng!
Bata pa langis boss 2k p lng bat maaga palit? Bood for 10k kms ang langis nyan basta fully synthetic
Paps Hindi Kaya Yung dahilan bat may oil pa Jan na natira Sa "third filter" eh dahil Sa Naka paddock stand ka...? Kase Si dominar ehh NASA gilid talaga Yung drain port Ng oil gawa Ng Wala nga centre stand ,nakatagilid sya ...pwede patry paps na Naka side stand ka Lang mag change oil Kung may tutulo pa Kaya Sa "third filter"
Ganun dati ginagawa ko nung wala pa paddock stand. Marami talaga naiiwan sa third filter kahit alugin pa ang motor.
Wala ba oring yan oil filter ?
Madlaw ba? Nalaing ka nga ubing lakay😂
sir pabulong nmn san mo na score mga bracket mo.
Ako na gumawa dyan sir.
nice one papang
pa feedback sa platinum nitro. ilang km bago palit?
Ok na ok for me paps, every 2k kms ako nagpapalit.
Ano tawag dun sa nakalaylay na cable nung tinanggal mo engine cover...
sa manual sir 1.8L total engine oil capacity ni dominar kung total drain(yung kasama sa babang drain plug) kulang ata ng 300mL nilagay mo na oil ?hehe
Hose yung nakalaylay, connected sa fuel tank. Drain para sa overflow or tubig if ever. 1.5L initial na kinarga kong oil plus top up around 300ml. So 1.8 din lahat.
@@maningmotour4717 thank you paps laking tulong nitong tutorial mo sa tulad namin newbie sa pagmomotor na sarili esp domeng. 🙏 RS always
Nice paps
Sir saan mo nabili yang center stand mo ibibili ko si domeng ko tnx
Online sir.
@@maningmotour4717 isang size lang ba sir yan baka magkamali lang sir
Universal kunin nyo sir, yung swing arm type.
Sa dominar Ug po Kaya Meron ding third oil strainer?
Meron din po ata sir. Check nyo po, tanggalin nyo lang engine guard, makikita na po sa ilalim ng engine.
@@maningmotour4717 palagi niyo na po ba Yun tinatanggal sa everytime mo po na mag change oil?
Yes po. Every oil change din.
@@maningmotour4717 ibig sabihin po palaging 1.8L ang kinakaraga mo po palagi?
Approximately 1.7 to 1.8 L basta maabot po yung tamang oil level. Sa engine oil window po ako lagi nagbabase sa oil level, gaya po dun sa ginawa ko sa video.
New Sub here Paps...Kailan pa kaya kita maankin Domeng😁
paps magkano gastos mo sa lahat
800 for 2liters engine oil, 140 for oil filter. 940 po lahat.
salamat po
Hindi na dapat ipaandar Ang makina.diretso mo lang idrain Ang oil
wrong method nman sir
dapat saglit lang paandarin baka mag loose thread kapag mainit