This is very interesting! Thanks for sharing, I would love to meet up with you in the near future. I live in Chicago and have been going back and forth on kswapping my insight with my DC5 drivetrain but I think I may just do a stock k24 and Accord trans to see how I like it.
woah, just ran through a bunch of your videos, super awesome! any write up on the set up of the speeduino board as far as jumpers needed? it doesnt look like you have too much extra things on there.
Thanks. I hope it helps someone. I'm going to make a video on the whole setup of running the k on Speeduino, but in the meantime, my jumpers are configured as follows: Jp1: 5v, jp2: hall, jp3: hall, jp4: jumper in, jp5: jumper in. The Speeduino can read and drive all of the oem sensors except vtc. I have the Speeduino vtc output running vtec as on/off. Vtc is locked at 0 degrees on my car for now. Someday I might try to get it to work, but first things first...
Hey man you wouldn't happen to have a pinout for the honda or acura rsx obd2 ecu pin out I have a SPEEDOUINO vs4 with an daughter board I have a honda case and a plug but need the pinout so I can go form my board to the case plug like you have yours
I don't have rsx diagrams, as I started with accord stuff. If you go to hondahookup.com, in the downloads area you can download rsx shop manuals that should have what you need.
![Getting Started with a Speeduino ECU | Beginner's Guide | [Hardware]](http://i.ytimg.com/vi/9OhMNd45B9Y/mqdefault.jpg)
Nice, I did the same for my H22 Prelude. To make the solder joints more durable you can put some hot glue around it.
Oh man super pumped on finding your channel! I'm looking at swapping a K24 into a 70's Lancia gonna go through all your vids-Cheers
Totally Amazing! Really Neat!!!
This is very interesting! Thanks for sharing, I would love to meet up with you in the near future. I live in Chicago and have been going back and forth on kswapping my insight with my DC5 drivetrain but I think I may just do a stock k24 and Accord trans to see how I like it.
Thanks. I'd be willing to show you the car and talk shop if you are ever in the Madison area. Let me know.
@@elscorchomotorsports7199 I should be free in July any day. Will give you a heads up. Thanks for offering! Much appreciated.
woah, just ran through a bunch of your videos, super awesome! any write up on the set up of the speeduino board as far as jumpers needed? it doesnt look like you have too much extra things on there.
Thanks. I hope it helps someone. I'm going to make a video on the whole setup of running the k on Speeduino, but in the meantime, my jumpers are configured as follows: Jp1: 5v, jp2: hall, jp3: hall, jp4: jumper in, jp5: jumper in. The Speeduino can read and drive all of the oem sensors except vtc. I have the Speeduino vtc output running vtec as on/off. Vtc is locked at 0 degrees on my car for now. Someday I might try to get it to work, but first things first...
Do you have a pinout diagram handy?
Hey man you wouldn't happen to have a pinout for the honda or acura rsx obd2 ecu pin out I have a SPEEDOUINO vs4 with an daughter board I have a honda case and a plug but need the pinout so I can go form my board to the case plug like you have yours
I don't have rsx diagrams, as I started with accord stuff. If you go to hondahookup.com, in the downloads area you can download rsx shop manuals that should have what you need.
I love one of these. Where'd you pick it up.
Wtmtronics.com has the boards and kits.
How can avail for k series
Hi you have working vtec and vtc with speeduino?
I have vtec working, but not vtc. I don't have a solution to get vtc working yet. If I do I will be sure to post about it.
Some a--hole is buying up all 4.4 versions, nearly 2 years waiting for stock to replenish.
Mumble, Mumble, Mumble
Feel free to make a better video.