VW Golf MK4 2.0 Radiator Removal and Replacement
Вставка
- Опубліковано 21 гру 2016
- Today we show you how to deal with a leaking radiator in your VW Golf MK4. A common issue with these vehicles is wear with age and corrosion over time in the bottoms of the radiator, and eventually the radiator will start to leak and must be replaced. In this video we show you exactly how to do that! Enjoy and stay tuned for more videos! Amazon purchase links below.
Tyler,
*************************************************************************************
SUBSCRIBE:
ua-cam.com/users/TylerOvens?...
*************************************************************************************
SHARE THIS VIDEO LINK: • VW Golf MK4 2.0 Radiat...
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.COM):
Video Equipment:
GoPro7: amzn.to/33FWCAW
GoPro Accessory Kit: amzn.to/2Uehig4
GoPro Stabilizer Gimbal: amzn.to/2UvX5Bz
VW Radiator Parts:
Radiator: amzn.to/2VaVWRr
*************************************************************************************
BUY THE ITEMS IN THIS VIDEO (AMAZON.CA):
Video Equipment:
GoPro7: amzn.to/2UdHtnk
GoPro Accessory Kit: amzn.to/3bl9wXy
GoPro Stabilizer Gimbal: amzn.to/3dlBt3r
VW Radiator Parts:
Radiator: amzn.to/3coBkLl
**************************************************************************************
CONTACT ME:
E-Mail: tylerovens@me.com
Awesome job ! . Simple and correct with no fluff, just how a repair videos should be produced. 👍🏽
Great video, especially for us in the rust belt areas like Southern Ontario. Most folks don't know what we have to deal with trying to disassemble rusted out fasteners. I'm heading out to replace my rad on an Mk4 Golf TDI. With your help, I know it's doable this afternoon.
Great video. Very helpful and concise. This was quite a process and I ended up having to cut some of the torx bolts because they were so badly corroded and just stripped out. I recommend anyone doing this to soak all of these torx bolts in PB Blaster overnight. The bumper cover retaining bolts and fan shroud screws were the worst.
Thnx guys done mine today thanks to your video.doing rear axle bushes tomorrow
Awesome job, still helping people out 6 years later
Thank you, very helpful to a Chevy guy working on his sons VW. I would have had the engine out and who knows what else by the time I figured it out!!
I did this job this weekend, took more time than I thought... you do not have to take the wheels off I also found that it was so much easier to install the new radiator by bolting it in without the fan assembly / shroud attached.
One of the best "how to" car repair videos. Thanks so much
This video helped me alot! Big thanks!
Today I replace a equal in Brasil on my garage, very good your vídeo
Thank you. I needed to know how the 3 rad electrical connector came apart!
PARABÉNS PELO VÍDEO ME AJUDOU BASTANTE.
GREAT VID.
Thanks for sharing your knowledge. It was very helpful. But I didn't need to remove wheels all you have to do is to Jack it up and fully turn your wheels left . Stubby screwdriver will do . Another think . Because I don't have ac so I had lots of room to work . I didn't have to remove plastic frame under metal bumper . I just bent it a bit to remove rad . I removed lights but possably didn't have to . All went smoothly. But i snapped bit of plastic on plug for temp sensor as you mentioned in vid 😂 Thanks again 👍. Saved myself few pounds.
Merci de la part d'un Français, tu m'a sauvé la vie. Ty
Straight to the point. Extremely helpful video. 👍🏻
Great find. Great job. Years later...still coming in handy as im doing this tomorrow morning hahahaha
So clear and to the point the whole way thru. Thank you
Excellent presentation !!! This is a big help for my project. Thank you
merci pour la vidéo 👍👍