HEMI Electronic Exhaust Cutout - ITS RIDICULOUSLY LOUD
Вставка
- Опубліковано 10 кві 2018
- In this video we review just how loud a cutout is on a 5.7L HEMI and just how loud it sounds. In my opinion it sounds like SRT or a HELLCAT with a modified exhaust.
QTP 3" Exhaust cutout
amzn.to/2YwuFYh
QTP WIRELESS REMOTE CONTROL MODULE
amzn.to/2W7eKCq
QTP 3" Y PIPE
amzn.to/3iXto7r
As always make sure to drop your feedback in the comments below.
ELECTRIC CUTOUT INSTALL VIDEO HERE!!!!
• INSTALLING AN ELECTRIC... - Авто та транспорт
*Check out the parts HERE* 💪😎
QTP 3" Exhaust cutout
amzn.to/2YwuFYh
QTP WIRELESS REMOTE CONTROL MODULE
amzn.to/2W7eKCq
QTP 3" Y PIPE
amzn.to/3iXto7r
BoostedMotorsports any clue if this works in the 2500 Ram Gas model?
Pro tip : you can watch movies on kaldrostream. I've been using them for watching all kinds of movies lately.
@Jad Scott definitely, have been using Flixzone} for months myself :D
Gives me chills behind my spine love that hemi
Haha thanks Rob! Its even louder in person the video doesn't do it justice!
Robert Rodriguez that's what she said😀👏😀👏😀👏😀👏😀👏😀👏😀😨😀👏😨👏😀😨😀👏😨😀👏
It's been 3 weeks since I ordered cutouts... just waiting for them in the mail
This video makes each week bearable during the wait
Back in 1988 my friend had a 73 Buick Century with a 350 with just the y-pipe no exhaust no cat back then we drove everywhere with just the y-pipe . Then he bolted on a cherry bomb it sounded great. One time at a party couple guys borrowed the car and drove through a cornfield lost in October it was the funniest thing I ever seen and heard. The car had corn all over it. I was stoned and drunk couldn't stop laughing.
That Growl when shifts sounds Gnarly dude sick
Yeah the shifts sound nuts lol. Reminds me of a Challenger or Charger 👌
My 300 does that, is the clapping when changing normal? I thought I was having top end problems lol
It sounds beast mode with the valves open! Another bad ass mod! 👍
Thanks brother! One of my favorite mods for sure!
That sounds so freaking amazing I love it might do this to my future truck
Thanks brother! You'll love it! 🤘
GAWD THAT'S SOUNDS SWEET. Got to have it on mine! 😁👍
Haha thanks you'll love it! 🤘
This is sweet! I’m going to do this to my 2014 dodge 1500 sport.
Thank you bro. Getting a 14 5.7 next year. Thanks for your vids.
Thanks for the support Brian! They are definitely fun trucks! More videos on the way! 👍
BoostedMotorsports thanks bro. Putting in 4 inch bds lift kit. 33 44 neg nitto ridge terrain tires. Lo max tonnue cover, other stuff
I can guarantee that there was a smile on your face as you blew the doors off of those other vehicles as you drove by @ 2:29 .haha
🤣
like I’ve said before it does kinda of have that Exhust leak sound at low RPMs but you can’t help but to punch it an when you do man that sound never gets old 😂!!👊👊 keep up the good work, I’ve literally changed all my lights to LED because of your videos 👊👊
lol yeah I love the sound! Glad you put all of my LED vids to use! It was a pain finding bulbs that were reasonably priced that work but I'm glad everyone is benefiting from all that testing! 😁
Awesome video dude keep up the good work
Thanks brother I appreciate it! 👍
nice! i never knew a 5.7 could sound so good
Haha thanks brother! Should sound even crazier with the supercharger on it and headers soon! 🤙
yea totally. Your channel makes me want to get one for myself. I can't stand the exhaust note on my daily driver (4 cylinder Dakota)
Also Another Question all this sound its with a cold Air Intake KN so sound may be different on stock filter
Sounds sick!
Sounds amazing! Good luck with the build, sub'd!
- Jason @ Flowmaster
Thanks Jason! Should be a fun build! We should see about getting some flowmaster stuff on the truck later! The stock exhaust tips could really use an upgrade! 😁
My Jeep GC WK 5,7 hemi needs this! Any negatives by the way? Does it affect anything other than how it sounds?
Bad ass video bro sounds like a beast 👍
Thanks brother! 😎
Nice bro The good thing is is that you can open it and close it when you just wanna cruise Love it man can't wait to get mine. Was gonna go with the muffler delete but now I'm just gonna get the cut out After Hearing yours Anyway Keep the mod videos coming love what you doing. And thanks again
Hell yeah brother! You won't regret it! Definitely one of my favorite mods for sure!
where did you install it on you exhaust? is it after all of the o2 senors and the cat or is it before all of that? and if its before or after do you have any code problems with check engine lights or anything like that?
Im doing this on my custom truck and plan to use a small Magnflow race muffler before the cutout to clean up the sound a bit. Then a bigger straight through Magy out back with a tail pipe for a clean classy DD worthy performance sleeper exhaust. Sound be money
It does sound great. I have QTP electric cutout with remotes and a super 10 muffler for when it's closed.
Perfect setup! I just like the super stealth sound of the stock muffler and then all out madness when its open lol
did you run into the same issues as him when installing the cutout?
Thomas Petito no issues and it's been two years since I've had it on. Every now and then after Heavy Rain it doesn't want to open and I do have to spray a little WD-40 but that happens very rarely.
I was reading up it says to spray liquid wrench on the butterfly plate every month. I just ordered mine I cannot wait to install it. I love a loud exhaust but cannot stand one on a long drive.
@@thomaspetito6923 have you had any issues after with the cut out since installing ?
In all honesty it sounds like you just have the Flowmaster Outlaw exhaust bolted to it. Maybe a little more aggressive but pretty close. Sounds epic. Can't wait till you bolt that SC on the bad boy. I think you will be impressed.
Thanks Nate! I just like how I can shut the damn thing up for long drives and can control the noise! Should be fun with the S/C 😁
I really like this sound .
Thanks brother. Sounds even better in person!
I was hoping for a drive-by!
More videos on the way for sure! 😁
BIG REVS ~ small penis.
@@kimriley2491 u sound like the 8th graders at my school 😂
@@Aqua350Lt1 You sound like some jealous, small dicked car kid. 😂
Loud pipes save lives!
🤣
im normally not a fan of open headers on a stock motor, but damn to sounds good!
Haha thanks brother it sounds pretty crazy and nice to be able to shut it up at the flick of a switch too! 🤣
What is a good brand thats reliable. I have a 19 tradesman with a y pipe to a single muff. Should i run it single?
What cutouts did you use? I have a 2014 Durango and what cutouts! I’m just looking quality. Did you use the dodge one cutouts?
I enjoy this video.
Sounds awesome!
Thanks brother! 😎
I've got cut outs on my Durango RT. Best mod I've done yet!
Sounds unreal! Videos don't do it justice 😁
@@BoostedMotorsports for real! No way was I going to buy a brand name exhaust system for $1500 to $2000. The best part about the cutouts is that you can adjust it to suit your sound level.
Did you have to have it Tuned after install
I have an 07 ram hemi, I just had a super 44 after the cats and had it turned down in front of the rear wheels and it just sounded so deep and droning nothing bad ass like this. It’s also all stock 3” pipe maybe that’s why I’m not sure
Nice video sounds awesome
Thanks Roberto! 👍
I live in -30 winters would cutouts not be an option in this weather?
Where did you put the cutout??? I just got a 2019 rebel and i want to install one too
Inside the truck lol
How do i get my shifts to sound like that?
This is great, do you still have it on?
And does the kit still work?
What type of exhaust do you have installed on it?
How did you place your mics around your truck? And what mics did you use?
Sounds great Boosted!
Thanks Tom! 🤘
Sound good...😇👍doing my 2006 Colorado truck
It's pretty crazy hearing how quick the new trucks shift. Compared to my 1996 lmao. I put a glasspack on it and it sounds damn good with the 5.9L
Yeah these new transmissions are something else! Even compared to my 09 this transmission is completely different 😁
that's great sounding machine
Thanks brother! 🤘
Sounds great.
Thanks Nick! Sounds even crazier in person too! 👍
U think I can run long tubes then cut outs and then connect the two cats and on the cats run an x pipe or something
Do you feel more Horsepower and Torque?
The best channel on youtube! Great content for us Ram guys, keep up the good work man. Cheers from Toronto Canada
Thanks brother I appreciate it! Doing my best to bring you guys honest and good content! Plenty more on the way! 🤙
Do a video on how to launch control thanks my man
Hey I have the same truck and I’m really interested in doing this to mine but I’m this video what do you mean by manual mode ? Are you using the gear + and gear - buttons on the steering wheel or do you have another way ?
Yeah just the manual shift mod with the buttons on the steering wheel
Did this truck have 3.92 or 3.21?
Do you hear any “leaks” with the seals or valve when it’s closed, as in any sound that wasn’t there before? And if so how bad?
Clean in lubricated every now and then
Sounds very good and as a receipient of a hand me down 2004 1500 ram hemi this is going to be a top priority on the to do list.
Is this run either open/close or can there be any variation in between?
No on these open or closed
Do you have this set up till this day and also has it given u any problems
Sounds good
Thanks brother! 🤘
hell yeah!! Nice!!
can i install it on a 5.7 chrysler c300?
So what brand of cutouts did you get?
So how much would this cost to do this? I have a 2013 Ram 5.7 and would love this. I already have two spintech mufflers installed, true dual with an X-Pipe.
It's about $500 for everything. Knock about $100 if you just want to use a switch and not wireless.
Did you feel power loss with the cutout open? Sometimes people lose low end torque while straight piped.
I think it is actually better but I will eventually do a dyno run with it open and closed to get a true answer 👍
Hemiguy1985 ever vehicle is different with how much you gain/lose but you typically gain hp and lose torque.
Can you tell me please where did you get your mags and tires? They are slick!! The truck sounds amazing! Just ordered one for my Ram!!!
No problem brother! Heres the wheels! amzn.to/2KUMc8U . The tires are just regular tires with tire stickers glued on 👍
You have the link where to get the cutout?
Sounds awesome. Do they make anything to make my 2017 ram shift faster? Like a quick shift kit. I can’t find anything
You can tune the shift speeds and firmness with hp tuners, makes a MASSIVE difference
how does it sound compared to the craven you had on the truck a while back? louder?
Definitely louder. Less Refined. More Raspy. Super Badass. Can turn it off whenever you feel like not making babies cry 👍
Sounds beasty i hope you got to run it on 4x4 and tow haul mode i bet it would pull hard. Regardless get on a dyno would love to see those #'s
Shes a 2wd truck brother! We will get some before and after pulls especially with the headers and procharger 😁
How's it holding up?
Did you see any performance gains? Or did the computer auto remap the fuel air programming?
Honestly I didn't see too much difference other than the noise! A custom tune would probably help though! We are procharging the truck so not bothering with a tune just for the current configuration until everything is bolted up! 😎
Hi I have a diablo tune as well and carven exhaust but lately when I’m letting off throttle at high speed it downshifts loud like a manual does youres happen sometimes or anybody out there it’s so bad I took my exhaust back to stock
Do you have the 8speed transmission? They downshift quiet a bit when slowing down which will be loud with an exhaust.
Man what up with that gas mileage it’s so high. Same for the range l.
Did this with my 06 300 SRT8 with dual exhaust cutouts it was freaking awesome but after watching this video may have to install one on my Ram 2500!!! Did you get the pipe and cut out from qtp or Speed Shop or online somewhere????
I got it through Summit but its QTP. Waited for a ebay 20% off coupon and bought it through there 😎
I know exactly where u are lol good ol Irving tx
YASSSSSS SIR ! Rev it up 😎👍
🤙🤙🤙
Caption says Music. Soo true.
Haha thats awesome! 😎
Have you had any error messages pop up with like back pressure? Thinking about doing it on my 2016 ram rebel
No errors after months of use! Go for it! 👍👍👍
93pirateboy haven’t had a problem with mine after 5 months
@@BoostedMotorsports awesome
Did they last?
Just order some JBA Performance long tube headers. Going add true dual 3 inch exhaust with cutout, 40 siers Flowmaster for my big block 7.4 dually. Time wake this motor up !!
Did I miss where or how far back from a certain point they are mounted...Also I didn't see what manufacturer you used? Thanks in adv.
Hey Jason check out the other videos on the channel I have a complete install vid on the cutout 😎
I have the stock muffler , if i do a muffler delete can i install this or no??
Yes sir!
How's it holding up? Any Leaks?
Lol 1 mpg. I'm thinking about a classic single cab hemi... cutouts are top of the list currently
I just bought a tradesman and want to do the same thing. But the muffler guy i talked to said they fail. What have u heard or what kind to buy?
@@chrisa9035 i ended up with a flowmaster American thunder... I have the biggest crybaby neighborhood. If they ever complain though cutouts WILL be installed. And I have heard of the failures also
Sounds great! You probably shouldn't be driving that fast with low tires...LOL :)
Hahah I need to get the damn TPMS sensors installed sooner or later 🤣
Who tuned your truck?
Bruh this is where i live ....crazy background looked all too familiar
Does still working good? To me sounds great I like the muscle car sounds
Yes sir! Sold the truck but was still working perfectly before I parted it out 💪
Sounds freaking awesome is there any droning?
What I'm impressed about is that 16.5MPG avg.
HOW? I have a 2008 HEMI 5.7L and it's totally babied, brand new spark plugs, entire professionally done fuel system and engine cleaning, literally EVERY fluid and filter was just changed, always Synthetic oil, new shocks and tires, K&N intake, Flowmaster Super 50, etc. and I drive it cruise control 63-64mph (my sweet spot for MDS) on the highway and don't accelerate harder than needed.
Driving like a grandma I get about 12.5MPG avg.
Driving conservatively but with some fun, about 11.2MPG avg.
Driving just for fun, about 9.x MPG
That's my observations over 2 years. Maintenance didn't increase it either.
Any idea how to get it up? Costs me $90 every 2 weeks to fill it.
Hey Ben these newer rams with the 8 speed transmission and aerodynamics with active grille shutters get pretty good gas mileage stock. I can usually average around 20mpg if I do mostly highway. I've also done some mods to help with mpg that you can check out if you search through the previous videos. What wheels/tires do you have and are you stock ride height? This is one of the biggest single factors on this truck. Also my 24" wheels and 305 wide tires are hurting my mileage pretty bad too and would be a lot better with regular wheels/tires.
BoostedMotorsports thanks for the reply! I'm currently on stock 18" 265/60.
I've seen a lot of your videos and have searched forums online for ways to improve MPG and haven't really found many other than a lighter right foot that've worked for me. Though I'll definitely go through your videos again to see if there's one I missed. Gets expensive paying so much on gas while being a student.
Do you happen to know if the new 8 speed transmissions hook up to older Dodge vehicles if I did a swap?
Sounds great can this work on a true duel strait pipe?
Definitely can! 🤟
I have Spelab electric cut outs and 30 inch cherry bomb dudes coming off
BBK headers and a Pro
CHARGER. Very loud and
Fast.
Howto install and whats the setup ?
Nice!!!
Thanks brother!
hi dude and when you open the Exhaust how is the drone inside the cabin??
Its super loud when you open it up!!
Daaamn. My borla system ain’t got nothing on that cut out 🤤
I just like that I can go from whisper quiet to loud in about 3 seconds. Borla sounds great it's just I can't handle loud 24/7 lkl
BoostedMotorsports True! But a cutout won’t last very long in our Swedish weather I believe.. with salt and such on the roads like 7-8 months of the year :( The electronics and other would take such a beating..
Did you find that you started getting check engine codes and whatnot? Also does this void your warranty?
Nope no issues!
Why did you not just do a muffler delete? Or do you still have your muffler on? Curious. Big fan of your videos though . Great content
when i hit my rev limiter it farts . i just have a straight pipe. so i can't wait to get cutouts. Wonder how it sound even without cats lol.
I’m pretty sure the cutouts are pre cats.
It's been a couple months, John. How about an updated review. I heard they might create an exhaust leak because they don't seal properly.
Still no issues so far Bo! 😎
@@BoostedMotorsports have any issues occurred since you’ve had it installed ? Looking to get one on my 5th gen 1500 but I’ve heard about the leaks they cause over time
Do you have link?
I think a straight true dual exhaust with 2 cut outs would sound even better