Same reason, I got it for. Used it to mod my Tilta Float. The DJI power base has 2 lemo-out, the Tilta one only 1 lemo-out, so the Smallrig one is perfect for feeding power back up to the camera, when mounted on the float.
It does indeed. I combined it with Smallrigs Camera Power Plate for the RS2 and RS3 Pro, which is wider than the original ones, which then takes Lemi-in again and gives you 2x D-tap and 1x 7.4V barrel. Made the Tilta Float a lot more usable. Only thing, I'm complaining about, is that Smallrig didn't add the gear to adjust the arca swiss carrier.
those nato plates are about m4 i think , size wise m6 is around the same diameter as 1/4 20 and M8 is near to 3/8ths. 1/4 20 and M6 is a total pain as they kind of half fit. e.g i have dual handles from smallrig and digital foto (ares) the ares is m6 and smallrig 1/4 20 Arri rosettes seem to be m6 too... on the plus side m6 is everywhere in europe and 1/4 20 rare apart from cameras i guess usa is the reverse .
Hey! Thank you for this suggestion. What equipment can you power with the power out? Does it work with cameras like BMPCC4K or GH5 on the R32/RS3? Probably a stupid question. Sorry ;-) Best regards
Great info Vaho!
Same reason, I got it for. Used it to mod my Tilta Float. The DJI power base has 2 lemo-out, the Tilta one only 1 lemo-out, so the Smallrig one is perfect for feeding power back up to the camera, when mounted on the float.
Also if you notice it's much wider and it creates better stability when on the Steadicam
It does indeed. I combined it with Smallrigs Camera Power Plate for the RS2 and RS3 Pro, which is wider than the original ones, which then takes Lemi-in again and gives you 2x D-tap and 1x 7.4V barrel. Made the Tilta Float a lot more usable. Only thing, I'm complaining about, is that Smallrig didn't add the gear to adjust the arca swiss carrier.
@@camerariggingmods9667
Hi, which battery you use and which port to power rs3 pro?
Thanks a lot in advance.
Hi same question can you use np-f970/770 on the Andycine battery plate??
those nato plates are about m4 i think , size wise m6 is around the same diameter as 1/4 20 and M8 is near to 3/8ths. 1/4 20 and M6 is a total pain as they kind of half fit. e.g i have dual handles from smallrig and digital foto (ares) the ares is m6 and smallrig 1/4 20 Arri rosettes seem to be m6 too... on the plus side m6 is everywhere in europe and 1/4 20 rare apart from cameras i guess usa is the reverse .
Hello. Can you please tell me if I can power the RS 3pro stabilizer from the V mount battery and then through the output of the Sony ZV-E 1 camera?
What base mount are you using to fit it on bottom? Those three holes on the bottom of that power adaptor dont match to anything I got…
👍🏾🙏🏾
Hey! Thank you for this suggestion. What equipment can you power with the power out? Does it work with cameras like BMPCC4K or GH5 on the R32/RS3? Probably a stupid question. Sorry ;-)
Best regards
With the proper cable you should have enough voltage to power almost any camera
@@camerariggingmods9667 That's wonderful news. Thank you!!!
works fine with BMPCC 4K i have the smallrig power plate and i just used one of the dtap to power the plate and then dtap to bmpcc 4k.
Dumb question but why can’t you just mount the battery/ handle to the jib/crane/ float/ rig? Why is this piece necessary?
Becouse the weight distribution and how many screws will hold your entire system!
It works only on the pro version of Rs3, or both Rs3 and Rs3 Pro
Rs3 pro and rs2 pro for sure, other rigs I can't confirm bro sorry:(
DigitalFoto just came up with new version of there own and it fits RS3 PRO better then anything else I just want posted a video on it
And: What kind of tape do you use?
Gaffer tape or electrical tape
Hey man. No longer on Facebook cause I’ve been hacked. Hit me up from my modelling website..