HOW TO PUT PHOTOS IN EPOXY RESIN- DIY PHOTO SOAP DISH & DIY PHOTO REFRIGERATOR MAGNET - GIFT IDEAS

Поділитися
Вставка
  • Опубліковано 21 лис 2024
  • I really enjoyed this project . You can take your favorite photos & turn them into some really great timeless keepsake gifts. You can use this same method to make coasters if you don't want a soap dish. Be sure to wear a proper mask & work in a well ventilated area.
    You will need: Resin, gloves, silicone mold , glitter (optional), laminator (if you don't have a laminator some people seal photo with scotch tape I've never tried it though)
    Check links below for DESIGNER CHARMS , Custom Charms & Rhinestones
    I hope you received some inspiration & thanks for watching!
    DON'T FORGET TO HIT THAT NOTIFICATION BELL!
    Shop with us LIP GLOSS, LUXURY SHOE CHARMS & more , our website is : www.myroyalrad...
    COUPON CODE: ROYALBEAUTY10OFF
    DREAM BUBBLE CLEAR LIP GLOSS : www.myroyalrad...
    LARGE BLING GEM VARIETY KIT: www.ebay.com/i...
    RHINESTONE BULK VENDORS LIST:
    www.myroyalrad...
    BLING DESIGNER CROC CHARMS:
    www.myroyalrad...
    LUXURY INSPIRED SHOE CHARMS:
    www.myroyalrad...
    LUXURY INSPIRED CHARMS: www.myroyalrad...
    Also any gun or magazine holster needs shop with us : crtacticaldefe...
    **USE MY SPECIAL COUPON CODE FOR DISCOUNT: VIBES
    RHINESTONE CLEAR BLING ADHESIVE SHEET: www.ebay.com/i...
    RHINESTONE CLEAR AB BLING ADHESIVE SHEET: www.ebay.com/i...
    5mm LIGHT BLUE JELLY AB RHINESTONES: www.ebay.com/i...
    HEMATITE JELLY RHINESTONES 5MM: www.ebay.com/i...
    JELLY Rhinestone Variety kit: www.ebay.com/i...
    RESIN RAINBOW RHINESTONES VARIETY KIT: www.ebay.com/i...
    TEAR DROP ACRYLIC SEW ON RHINESTONES :www.ebay.com/i...
    WAX RHINESTONE PICK UP STICK BLACK: www.ebay.com/i...
    WAX RHINESTONE PICK UP STICK WHITE: www.ebay.com/i...
    WAX RHINESTONE PICK UP STICK BLUE:
    www.ebay.com/i...
    5MM OLIVE GREEN FLATBACK RHINESTONES: www.ebay.com/i...
    LARGE 6 oz BLING JAR: www.ebay.com/i...
    20oz MICKEY EARS ACRYLIC DOUBLE WALL TUMBLER CUP: www.ebay.com/i...
    20 OZ DOME LID DOUBLE WALL TUMBLER CUP: www.ebay.com/i...
    20 OZ SKINNY TUMBLER CUP DOUBLE WALL: www.ebay.com/i...
    16 OZ MILK CARTON WATER BOTTLE TUMBLER: www.ebay.com/i...
    5MM ZIRCON BLUE RESIN RHINESTONES: www.ebay.com/i...
    RHINESTONE SPARKLY GLAM GOLD PADDED HEADBAND: www.ebay.com/i...
    CHECK OUT MY DIY PLAYLIST OF GLITTER & RHINESTONE LIQUOR & WINE BOTTLES: • DIY Glitter & Rhinesto...
    CHECK OUT MY DIY PLAYLIST OF
    RHINESTONE WINE GLASSES: • Rhinestone Bling Wine ...
    #DIY #RESINPHOTOSOAPDISH
    CASH APP: $ROYALSTHRONE
    Life Is A Whole Vibe
    5815 Lyndhurst Drive
    Suite # 24424
    Mayfield Heights, Ohio 44124
    Subscriber count 1/2/22 4:53 AM 10,795

КОМЕНТАРІ • 83

  • @TheLuvkat07
    @TheLuvkat07 5 місяців тому +4

    Thank you for being real, showing us the mistakes, and not editing it out. Appreciate you.

  • @1952Elly
    @1952Elly День тому

    You have such cute kids and they all turned out so cute

  • @lisacapers5853
    @lisacapers5853 Рік тому +1

    You are right the blue glitter is beautiful. I love All your projects. Lisa❤😮

  • @ResinbyCat
    @ResinbyCat 8 місяців тому

    I enjoyed the video I am about to do a Memorial Heart for my Aunts and Uncles adda photo of my Gma who passed last yr so your video helped me.Also your babies are Beautiful God keep blessing them.

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  8 місяців тому

      Thank you very much. I'm glad you found my video helpful ❤️

  • @lisacapers5853
    @lisacapers5853 4 місяці тому +1

    Love your work, beautiful family. Invest in silicone mold spray. It works! Makes the piece come out better.❤❤❤❤😊

  • @SavedByGraced-wk3km
    @SavedByGraced-wk3km Рік тому

    you are so talented, you have adorable children thank you for sharing

  • @janh5199
    @janh5199 Рік тому +1

    I love the idea of using a laminator when putting paper in resin so it doesn’t soak into the paper. Although I do agree 3 magnets is better, I think you had one of the original magnets flipped over when you glued it.

  • @mabel.e.kgalley9710
    @mabel.e.kgalley9710 Рік тому +1

    Beautiful pieces there, well done dear, keep the beautiful work up. Thanks

  • @teresagrigsby-rose8761
    @teresagrigsby-rose8761 11 місяців тому

    Blue soap dish my fav! U could use it to like lay ur rings in or earrings!! Zillion ideas racin thru my brain now! Ty! Lol

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  11 місяців тому

      Great idea!! I didn't even think of that. Thanks for watching ❤️

  • @BlondyMusrich
    @BlondyMusrich 10 місяців тому

    Omg I'm inlove with your work 👏👏❤️❤️

  • @blackpearl1p.n.726
    @blackpearl1p.n.726 Рік тому

    They All came out Beautiful ❤.

  • @alexandragomez4279
    @alexandragomez4279 2 роки тому +1

    You're awesome! You do it all! Thank you for sharing your talents.

  • @MarraCarreno
    @MarraCarreno 4 місяці тому

    Thanks , beautiful work❤

  • @J.IGarmon
    @J.IGarmon 11 місяців тому

    omg i love these ideas thank you

  • @janiceansari3089
    @janiceansari3089 10 місяців тому

    This is so awesome

  • @christinegranville6530
    @christinegranville6530 Рік тому

    Would also be a good idea for ashtrays

  • @lesliespiers8407
    @lesliespiers8407 Рік тому

    I just bought a laminator machine & love it for these projects, I had to learn the hard way, to make sure room temp is 75-80.

  • @RobbW-ay
    @RobbW-ay 2 роки тому +1

    I've used uv rain a few times. I never thought or tried gluing with uv resin through a hard item such as three magnets. Didn't know the uv rays would reflect to cure. Hmmm ty

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  2 роки тому +2

      I love to use UV resin as a glue for certain projects.

  • @phreedom4896
    @phreedom4896 2 місяці тому

    Is there a recommendation of wait time between layering photos and epoxy

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  2 місяці тому

      I waited until it was Firm enough maybe a few hours like 4 hours

  • @phreedom4896
    @phreedom4896 2 місяці тому

    Great tutorial

  • @fatiemataswaray1366
    @fatiemataswaray1366 Рік тому

    Wonderful this is amazing thank you

  • @sarahking3268
    @sarahking3268 6 місяців тому +1

    After you seal the photo then cut it, doesn't it break the sealing?

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  5 місяців тому

      No as long as you don't cut it too close to photo

  • @lindao7887
    @lindao7887 Рік тому

    Gorgeous!

  • @barbaradavis75bd
    @barbaradavis75bd 9 місяців тому +1

    How long did you wait before adding photo and next layer

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  9 місяців тому +2

      I believe it was right after. I didn't want to let it harden up before adding 2nd layer.

  • @LovelyLisha3
    @LovelyLisha3 2 роки тому

    😍!!Sooo Gorgeous!!😍...Thanks for sharing🎀💕

  • @kesha8403
    @kesha8403 11 місяців тому +1

    So when you do the second layer is it mixed with a and b resin

  • @donnayates6611
    @donnayates6611 Рік тому

    Great video and instructions! Just subscribed to your channel. TY

  • @jolandathomas6812
    @jolandathomas6812 Рік тому +5

    When you use resin and epox you need to have a mask on because it does let fumes. You should have a mask on at all times.

    • @lindao7887
      @lindao7887 Рік тому +1

      UV fumes are worse, just an FYI

  • @shonnettdouglas4653
    @shonnettdouglas4653 2 роки тому +1

    Hello what is the clear thing you have on your picture and what machine is that thank you?

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  2 роки тому +1

      It's epoxy resin & the machine is called a laminator.

  • @junpyocempron
    @junpyocempron Рік тому

    Can I use hairdryer instead of heatgun?

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  Рік тому

      I have never tried but you probably can. Try a low setting first so it doesn't blow it too hard.

  • @cerissahudson3831
    @cerissahudson3831 2 роки тому

    Beautiful

  • @Curious19731
    @Curious19731 2 роки тому

    Very nice .. I must try ..TFS Happy New Year

  • @Barbiex.o
    @Barbiex.o 2 роки тому +1

    Have you tried these with UV resin? Thank you!

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  2 роки тому +2

      I thought about it but it would take alot. They usually come in very small bottles.

  • @MariaGomez-xp4gq
    @MariaGomez-xp4gq 2 роки тому +1

    are the photos professional or did you run them off on your printer?

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  2 роки тому +2

      I took the photos myself & had them printed at Costco online print services

    • @lindao7887
      @lindao7887 Рік тому +2

      As long as you laminate them, you can just print them off any printer- just make sure you leave about 1/8 - 1/4 " border of lamination around the pic so that they're completely sealed.

  • @Kodas_unleashed
    @Kodas_unleashed 2 місяці тому

    Why when i put resin on picture, after some time the picture turns green

  • @mayawillan496
    @mayawillan496 2 роки тому +1

    Hi do you use a mask??

  • @Aweoluyemisi
    @Aweoluyemisi 10 місяців тому

    Please i want to know what you mixed with racin

  • @ZoegirlBev
    @ZoegirlBev Рік тому

    🔥🔥

  • @Aweoluyemisi
    @Aweoluyemisi 10 місяців тому

    Please can i mixed racing with acelerator

  • @bossladii9046
    @bossladii9046 Рік тому

    Do u teach orhers to do what you do

  • @irfanajohn651
    @irfanajohn651 Рік тому

    which is the best way 1.should i seal the photos thn pour resin...? 2.should i pour resin on without any photo sealings...if sealing is best so can i laminates photos it is good way to seal

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  Рік тому

      If you don't seal photo it will be damaged. I like to laminate photos to seal them but if you don't have one I heard Mod Podge helps preserve photos

  • @MariaGomez-xp4gq
    @MariaGomez-xp4gq 2 роки тому

    where did you get your laminator

  • @mayawillan496
    @mayawillan496 2 роки тому +1

    how long does the smell of resin linger?

  • @vichardman61
    @vichardman61 17 днів тому

    Hard to hear you over the music beautiful work

  • @kimstetter7456
    @kimstetter7456 2 дні тому

    Why do you have to turn up the picture u side down

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  2 дні тому

      I turned it face down because the bottom is the top when you unmold it

  • @firstladieee6615
    @firstladieee6615 Рік тому +2

    You don’t have to use a laminator for this

    • @LifeIsAWholeVibe
      @LifeIsAWholeVibe  Рік тому +1

      Correct! I prefer this method but everyone can do what works best for them 😉

  • @innekebenita3224
    @innekebenita3224 Рік тому

    Very nice. Can you teach me? I will pay

  • @marthagiraldo8893
    @marthagiraldo8893 6 місяців тому +1

    Beautiful