Hi! I’m currently watching your video with all my stuff set up ready to try to make a project. My question is, can I add my first layer on resin then add the picture and add the final layer of resin and then let it cure?
@@esperanzasaez7898 i am sorry i was at work . You need to add the first layer of resin let it cure overnight. Then add the image using any kind of glue . Let it dry for 20-30 minutes . Then add top layer
@@rutvicreations3470 hello, by rubber you mean silicone ? Yes, the curing time depends on the weather. If it is hot it takes less. In general it gets hard in 14hrs when you can de-molded but it keep curing artery that. Up to 48 hrs . I hope that answers your questions
Awesome 😎. Let me know how it goes . It is cold where I am at right now . It is taking a little longer to cure. Just keep that in mind . The colder the longer .
Did you laminate your photo or spray some kind of sealer on it to keep the colors from running/smurging? The finish product is just Awesome!! Thanks for sharing
What kind of photo paper do u have to use for this project? My husband lost 2 of his sons and I would love to do this for him to surprise him. Ty so much. Came out beautiful. Great work!!!!❤️🧡💛💚💙💜💙💚💛🧡❤️💜💙💚💜
Oh yes .i think he will really like it. I use regular photo paper, printed with an ink jet printer. My is shiny but you can also use the matte. I will not be necessary to make it so thick if you don’t put rose buds. I just made some photo coasters. I printed those on regular paper , on my ink jet printer. Let me know if you have any other questions. 🌹❤️🌹❤️
Always use gloves resin absorbs through the skin. It gets into your blood line and can cause problems also wear a mask the vapors can cause respiratory failure even if it’s Voc safe
Good morning and happy Sunday. Yes, the resin does not work unless it is mix. You need same parts of each. For example: 1oz resin, 1 oz hardener. Make sure you read the instruction every resin is different. I will add another link for a resin I have used that I like as well as the one I used for this video. Blessings
Hello thank you for your question. Yes it is standing. My housekeeper kept complaining that it was hard for her to put it back on the stand when she cleaned . So, I put a little bit of resin using it as glue to put the Together . I hope this helps
Hello, thank you for watching my video. I don’t really remember how much resin. I know I mention it on the. Jose. I have not done one of this in a long time. Let me check the video when after work and I will let you know
Hello 👋 No, i pour the first coat and wait 3-4 hours depending on the weather . I print the image on photo paper using a ink jet printer . I put the image before it gets completely but not too soon to make bubbles and make it uneven because of the weight of the image . I pour the resin over the image one the bottom coat is dry. You are able to preserve the image of you print it on photo paper and on an ink jet printer .
You need between 10-14 oz depending how bulky the flowers are. this measurement is already mix meaning 10 oz 5 of resin and 5 of hardener. here another video where I don't use rosebuds and it takes a lot less resin. I hope you like it. ua-cam.com/video/UAb_Tl1PVHE/v-deo.html Blessings
You can use any kind of paper. But, you must use an ink jet printer. That’s all. With this one I used photo paper. I did some photo coasters. With those I used regular paper .
I left it for 24 hours. It all depends on how hot it is where you are at. FYI I did another one a few days ago. The clients didn’t want the whole rosebud just some petals. I poured the first part and 2 1/2 ounces after. The second was dry in 12 hours. I hope I was able to help
Thanks so much for a quick reply I will always use your channel because you go step by step my bottom part the stand is still very loose the liquid so what should I do
Add you questions here, I will reply within 4 hours.
@Venus you can find the breakdown all the way at the end I believe it is $79
Hi! I’m currently watching your video with all my stuff set up ready to try to make a project. My question is, can I add my first layer on resin then add the picture and add the final layer of resin and then let it cure?
@@esperanzasaez7898 i am sorry i was at work . You need to add the first layer of resin let it cure overnight. Then add the image using any kind of glue . Let it dry for 20-30 minutes . Then add top layer
Hi,can we use rubber mould? How much time it takes to dry the top layer
@@rutvicreations3470 hello, by rubber you mean silicone ? Yes, the curing time depends on the weather. If it is hot it takes less. In general it gets hard in 14hrs when you can de-molded but it keep curing artery that. Up to 48 hrs . I hope that answers your questions
Trying this right now, first layer done. Off to bed! Thanks
Awesome 😎. Let me know how it goes .
It is cold where I am at right now . It is taking a little longer to cure. Just keep that in mind . The colder the longer .
Beautiful. Your is the best l have seen. A new fanLisa❤❤❤😊😊
Thank you so much I appreciate it
Love the frame beautiful 👪
Thank you. It was a lot of joy to make it .
Beautiful.Thanks for sharing.
Of course. I am glad you liked it. Let me know how it goes if you try it
Muy bien. Gracias
Did you laminate your photo or spray some kind of sealer on it to keep the colors from running/smurging?
The finish product is just Awesome!! Thanks for sharing
No I did not. I printed on regular paper. The secret is that you need to print your image with inkjet printer.
What kind of photo paper do u have to use for this project? My husband lost 2 of his sons and I would love to do this for him to surprise him. Ty so much. Came out beautiful. Great work!!!!❤️🧡💛💚💙💜💙💚💛🧡❤️💜💙💚💜
Oh yes .i think he will really like it. I use regular photo paper, printed with an ink jet printer. My is shiny but you can also use the matte. I will not be necessary to make it so thick if you don’t put rose buds.
I just made some photo coasters. I printed those on regular paper , on my ink jet printer. Let me know if you have any other questions. 🌹❤️🌹❤️
Mmy condolences, for your family's loss. Very sad.
New subbie! It's funny it popped up on my screen and the day you posted this was my birthday June 11th! Beautiful!
Wow!! That is amazing 😻. Let me know if you make it . You can share pictures with me on Facebook Momisdesigns
Blessings
Always use gloves resin absorbs through the skin. It gets into your blood line and can cause problems also wear a mask the vapors can cause respiratory failure even if it’s Voc safe
I love using that epoxy it’s great & fast cures
Yes I really like it . There are so many name brands. Ones you find what you like, stick to it. Blessings
Do you need both of the epoxy??
@@slimmmhoneyyy9103 I thing it is a must
After completed and the resin is hardened does it still feels sticky
No. It should not feel sticky. Ones it hardeners it should be completely smith and non sticky
There is 2 links for the epoxy, are they different from each other or is the size thats different?
Yes one is an 8 oz and the other is 64 oz .
Can you use fresh flowers ?
Hello, thank you for you question. No you can not. The flowers turn brown and they look burn
How come your resin is still cloudy
Maybe is the angle of the video. Because it is not cloudy .
I see u got the resin but did u mix with a hardener as well. I see kits that come with both.
Good morning and happy Sunday. Yes, the resin does not work unless it is mix. You need same parts of each. For example: 1oz resin, 1 oz hardener. Make sure you read the instruction every resin is different. I will add another link for a resin I have used that I like as well as the one I used for this video. Blessings
Here is a resin you can buy a small bottle to try it out if your are experimenting with resin. ua-cam.com/video/nqqGnA543ds/v-deo.html
Is this frame standing properly on this mould stand? I have made it but it sleeping a lot from this base
Hello thank you for your question. Yes it is standing. My housekeeper kept complaining that it was hard for her to put it back on the stand when she cleaned . So, I put a little bit of resin using it as glue to put the
Together . I hope this helps
please what is your resin measurement?
Hello, thank you for watching my video. I don’t really remember how much resin. I know I mention it on the. Jose. I have not done one of this in a long time. Let me check the video when after work and I will let you know
Gusto lo q buscaba muchas gracias 🙏 💖
Que bueno. Me dices cómo te va con tu creación
@@MomisDesigns gracias 🙏
Hi can I please ask where did you get the heart shape from??
Hello 👋 scroll down to the description area. There is a link that will take you straight to the listing on amazon . Blessings 🌺
Do you laminate or cover your photo with modge podge?
Hello 👋
No, i pour the first coat and wait 3-4 hours depending on the weather . I print the image on photo paper using a ink jet printer . I put the image before it gets completely but not too soon to make bubbles and make it uneven because of the weight of the image .
I pour the resin over the image one the bottom coat is dry. You are able to preserve the image of you print it on photo paper and on an ink jet printer .
@@MomisDesigns ok thank you. I think I may be ok with the photo paper I got.
@@AuntieOG very good. Good luck 👍 blessings
How much resin and hardener do you put in separate cups first time trying it I have the heart frame
You need between 10-14 oz depending how bulky the flowers are. this measurement is already mix meaning 10 oz 5 of resin and 5 of hardener. here another video where I don't use rosebuds and it takes a lot less resin. I hope you like it. ua-cam.com/video/UAb_Tl1PVHE/v-deo.html Blessings
Thank you
How do you put heart on the stand to hold it thanks
The heart is thick enough to hold standing up . But , you can also put a little bit of resin in the bottom V part of the heart and let it cure .
Hello, do you take custom orders?
Yes, I do. Just make sure that all custom orders need to be paid in advanced.
@@MomisDesigns how can I put in my order?
@@loveyourcrownz you can go through my whats app 805 6121255. It is $59 plus shipping $8
Did you laminate your photo?
Thank you for watching my videos. No I don’t laminate the photo.
You need to print your photo on regular paper use in an ink jet printer
How dose your photo not change colour help xx
You can use any kind of paper. But, you must use an ink jet printer. That’s all. With this one I used photo paper. I did some photo coasters. With those I used regular paper .
i too do the same work check my channel
@@jkresinartsandsuppliers6810 awesome, I will check it out have an awesome day 🌹
Congratulations on your decision to start your UA-cam channel. Let me know if I can help in any way. Have a blessed day 🌹
@@MomisDesigns thank you very much for your support.
How long between the last 6-10 oz of resin?
I left it for 24 hours. It all depends on how hot it is where you are at.
FYI I did another one a few days ago. The clients didn’t want the whole rosebud just some petals. I poured the first part and 2 1/2 ounces after. The second was dry in 12 hours. I hope I was able to help
😮no gloves used?????
I know. This is at the beginning of working with resin. I didn’t think about it. But I do now .
Blessings
@@MomisDesignspls take care:).
What is the size of the picture?
The image needs to be the longest width minus 1/4 inch. Depending on how the picture was taken . The length needs to 3/4 of the length
How much resin is required in grams
Good morning ☀️ 10 oz total 283.50 grams.
I am working on a different design. The video should come out tonight . Blessings
How much would you sale this for?
Between $59-65
ua-cam.com/video/UAb_Tl1PVHE/v-deo.html here is the link of another video that takes a lot less resin.
How much do I sell for?
Hello thank you for watching my video . The price breakdown is all the way at the end
Thanks so much for a quick reply I will always use your channel because you go step by step my bottom part the stand is still very loose the liquid so what should I do
I'm at the overnight stage
The Heart photo is already hard let me see if I can send a pic
@@stephaniebowers9175 thank you 🙏. Let it go through the process longer. Depending on the weather where you live it may take longer
I notice you don’t wear gloves. Reason?
I forget. An ones I start I get lazy to go downstairs to the garage to get some
Please use gloves and a mask epoxy is dangerous. But love your work
Always wear gloves while working with resins
Yes, thank you for the suggestion. Blessings
Please use gloves when working with resin
How much would you sell them for?
Between $59.99-$69.99
@@MomisDesigns thank you! 😊❤️