Tremec TKX 5 speed into the '74 Z28 FINALLY!!!!

We got around to it! Our 1974 Z28 with the 450 HP blueprint engine and the tunnel ram is finally getting the 5 speed. In this video we get the 4 speed out and show you how to set up the bell housing for the Tremec TKX. We had to get to the clutch to see what flywheel was installed so we could order up a new 26 spline clutch for the TKX.
Be sure to subscribe so you get a notification when we get to the installation!
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/h...
License code: QJ1BLASGKPPUQJ8H
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/a...
License code: GXEIMLDNKNY1RZV3

[@widndn]

Just put a tremec tko 5 spd in my 73 corvette......real nice.

[@brianwelteroth9248]

FYI your bellhousing is off slightly more than 0.005 at the 10:30 heading.

[@moparnut6286]

Cool can't wait for the install video.

[@FamilysGarage]

Thank you

[@NathansMoparGarage]

Nice 😎

[@jagco2594]

are you going with hdy bearing... is so what bearing you are using. I having this problem now. Using a stock bellhousing type.

[@FamilysGarage]

We used the bearing that came in the kit from Silver sport

[@JohnnieBravo1]

Man, I want that transmission for my 71. Had to install those offset dowels to center my bell housing. Is that a standard 621 housing?

[@FamilysGarage]

Yes, the TKX bolts right up!😎

[@dm-hg1tf]

Why go hydraulic? Why not keep the mechanical setup?

[@FamilysGarage]

Less parts, more room under the hood, and easy pedal actuation with an aggressive clutch 😎🤟🏻🇺🇸