Why do we know so little about this British SMG? With firearms and weaponry expert Jonathan Ferguson

Поділитися
Вставка
  • Опубліковано 19 сер 2024

КОМЕНТАРІ • 295

  • @jonathanferguson1211
    @jonathanferguson1211 Рік тому +191

    So despite my scepticism on the W.O. M.G. 03 mark, WO *does* stand for War Office - Soley were slapping WO nomenclature on their would-be trials weapons, which is something I've not seen before. So it's "War Office Master General of Ordnance [Dept] 3".

    • @F1ghteR41
      @F1ghteR41 Рік тому +7

      My first thought was that M.G.O.3 was pertaining to some subdivision of the War Office, but then I brushed this idea off as too wild. Turns out, It was really that. Thanks for keeping us updated, Jonathan!

    • @balthiousdire6795
      @balthiousdire6795 Рік тому +4

      so do i get half a curly wurly then ?

    • @samwalker7567
      @samwalker7567 Рік тому +2

      @@balthiousdire6795 only if I get the whole one for filling in all the blanks!

    • @markholmes2023
      @markholmes2023 Рік тому

      As you were describing this weapon I was thinking was it some attempt at a War Office requirement for a P.D.W. like weapon for lorry drivers/tank crews in the 1930's.

    • @jamiecurran3544
      @jamiecurran3544 Рік тому

      I was thinking that or weapons ordinance?🤔

  • @Ramonatho
    @Ramonatho Рік тому +310

    Only Johnathan can be sat in front of a wall of EM-2s and be holding something more interesting than those.

    • @dogsnads5634
      @dogsnads5634 Рік тому +21

      And XL60's....
      It's an almighty flex though....no-one else has more than 1 EM-2...there are 13 on that rack alone...

  • @jameslawrence2446
    @jameslawrence2446 Рік тому +128

    Mention of a "Beretta arm obtained on loan from the Soley Armament Company" appears in correspondence from the Chief Inspector of Small Arms in January 1933. He described it as "quite promising", but that it was "not for sale". (Soley actually did make some guns directly on commission of the CISA so maybe this was built for him.)
    The design work on this gun was almost certainly done by a Belgian gunsmith, Edgard Grimard, who was partnered with the Soley Company in the 1930s. He also designed a modified Lewis gun which they produced.
    The ventilated upper handguard on this weapon is heavily reminiscent of another Italian submachine gun which was available around the same period, the Armaguerra Mod. 1935. I suspect Grimard was pretty well familiarized with Italian subguns.

    • @jameslawrence2446
      @jameslawrence2446 Рік тому +36

      Also, I should add, I don't think this gun was designed with the intent of creating a more compact version of the Beretta 1918/30. It's only about 60mm shorter; no effort has been made to shorten the receiver or barrel (in fact I think the barrel is actually longer on the Soley gun). I reckon this was more likely an experiment in ergonomic handling, or otherwise something completely frivolous.

    • @F1ghteR41
      @F1ghteR41 Рік тому +5

      Very interesting, thanks for sharing!

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +8

      Very interesting, thanks James!

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +9

      @@jameslawrence2446 Agreed, although as with the Viper, making the weapon slightly shorter is a benefit, in terms of balance if nothing else.

  • @popuptarget7386
    @popuptarget7386 Рік тому +16

    Part of the devilish plan to mount Cavalry on Ostriches. One hand for the rifle, one for the reins.
    "War Ostrich Mg#3"

  • @DaveCox56
    @DaveCox56 Рік тому +25

    A New York Times article of 1936 stated that Captain J. Ball of the Soley Arms Co. Ltd admitted paying US dealers to take a loss on war surplus weapons. Another record that I found on a well known search platform said that the company was accused of manufacturing the Berretta without a licence.

  • @LiveDonkeyDeadLion
    @LiveDonkeyDeadLion Рік тому +6

    The wall of weapons behind Jonathan has to be his personal bull pup heaven

  • @aidanfarnan4683
    @aidanfarnan4683 Рік тому +2

    I do love the fact that Jonathan has acsess to guns from every "What if?" ClockpunkSteampunk/Desilpunk/Cyberpunk game ever.

    • @PavewayJDAM
      @PavewayJDAM Рік тому

      He is the Doctor Who of Brit Guns

  • @ZeeMid
    @ZeeMid Рік тому +27

    That is... unique, to say the least. Looks like a bit of an ergonomic nightmare, but god damn it’s pretty

  • @tomd.6488
    @tomd.6488 Рік тому +85

    It's like a WW2 British UZI, as bizarre as it is cool haha

  • @fredhogg4361
    @fredhogg4361 Рік тому +38

    W.O is War Office - maybe a prototype made to fit a W/O specification (MG 03?) issued in that period of time.

    • @EchoCharlie1361
      @EchoCharlie1361 Рік тому +2

      That was what I was going to say.

    • @Answersinbooks
      @Answersinbooks Рік тому +4

      Same thinking: War Office ‘Machine Gun 03’ as shorthand for a spec.

    • @driftertank
      @driftertank Рік тому +3

      Yep. "War Office - Machine Gun 03" was what came to my mind.

    • @keithskelhorne3993
      @keithskelhorne3993 Рік тому +3

      or Master General of the Ordnance?

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +15

      Nearly - it turns out (we are almost sure) Soley were slapping WO nomenclature on their would-be trials weapons. So it's "War Office Master General of Ordnance [Dept] 3".

  • @derekp2674
    @derekp2674 Рік тому +7

    Thanks very much, Jonathan and team. This looks exactly like the sort of weird design I might have expected to find in an odd corner at the Pattern Room, had I ever managed to visit there.
    The upper and lower attachments to the butt might have been inspired by some of the hooked buttplates on Schuetzen style target rifles, to help keep the butt in a consistent place for more accurate shooting.
    As others have speculated, placing the main shooting grip at more or less the centre of gravity may have been to make it easier to fire one-handed, except that its weight of 3.85kg isn't going to help much with that.
    But never mind, this will also make it ideal for dual wielding in video games.

  • @miltoncubicle3180
    @miltoncubicle3180 Рік тому +2

    These videos are always a highlight of day

  • @AsbestosMuffins
    @AsbestosMuffins Рік тому +2

    beautiful smg in a way that almost looks futuristic especially for pre-ww2 sub guns
    would have been very handy for paratroops

  • @Longm8
    @Longm8 Рік тому +2

    Cheers Jonathan for mentioning the Viper in this video, agree the stock has that one handed sort of idea. I did my research project about the development of viper at the armouries as an intern back in 2011. Glad to know understanding the story has been useful for other projects all these years later.

  • @twhittaker4343
    @twhittaker4343 Рік тому +9

    My guess is war office - machine gun 03

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +4

      The same occurred to me but I've never seen a mark or abbreviation like that anywhere and this is not a machine gun by any stretch. Until the Sterling era an SMG was a 'Machine Carbine' in Britain.

  • @johnsharp6618
    @johnsharp6618 Рік тому +3

    War Office machine gun no 3 (3rd one made, possibly 2 missing or failed in testing)
    As for the arms on stock,
    What it could be for is mounted use, pulled in to shoulder while the other hand is holding the side of a vehicle, horse reins, handle on a motorbike, any number of uses.

  • @jjforcebreaker
    @jjforcebreaker Рік тому +2

    When fully deployed with that bayonet and stock it does look kinda... nice? Unusual and interesting for sure. Great vid!

  • @tomthounaojam345
    @tomthounaojam345 Рік тому

    Background get 10 out of 10, a treat for the eye, cheers mate

  • @iansnell8897
    @iansnell8897 Рік тому +1

    I seem to recall that Soley modified the Lewis LMG with a Bren mag &removed the barrel shroud during the
    Phoney war when the British Army felt it was outgunned by the Germans with their MG34s &MP 38s&40s. The Soley-Lewis was meant to be an automatic rifle. Maybe this is related?

  • @F1ghteR41
    @F1ghteR41 Рік тому +15

    1:20 The use of magazine in the pistol grip at this early date is truly remarkable! The date puts this gun whole five years ahead of the first Soviet and Italian designs of this type, and a decade before the first truly successful one, the Czechoslovak SA vz. 48.
    1:49 How can one resist such an invitation?! My wild guess would be that W.O. means simply the War Office, while M.G.O.3 might refer to some requirement pertaining to machineguns and ordnance (or maybe, 'machineguns, other' in the reverse nomenclature of the day) issued by it.
    5:33 A dreadful opening for mud ingress, incidentally. Makes me think that it would be one of the first things noted during the trials.
    11:29 Isn't the true prototype of this design a type of bayonet used on the Mod. 91C Carcano cavalry carbine? The usefulness of it on a gun as short as these two is highly debatable, though, with people like Matt Easton demonstrating its limitations as opposed to the gun & knife/dagger weapon set.

    • @jameslawrence2446
      @jameslawrence2446 Рік тому +5

      With regards to the mag in the pistol grip, the Japanese were probably first; the experimental Nambu Model 1 used a grip-feed system as early as 1933. Possibly predating even that, there is an experimental SMG made for Austrian trials which uses this configuration, though the exact date and manufacturer are unknown (personally I reckon it's a Mauser design).
      You're right that the folding bayonet was originally designed for the Carcano cavalry carbine. The Beretta guns just lifted from the Carcano, because the first Beretta automatic carbines were actually produced using recycled components.

    • @F1ghteR41
      @F1ghteR41 Рік тому +1

      @@jameslawrence2446 Now that you mentioned it, I seem to recall reading about this Nambu design. The Austrian trials you mention are those of 1930, am I getting it right?
      As for the use of Carcano bayonets, I think more important than just using up spare parts (and to be honest, this is the first time I'm reading that Beretta actually did this) is the fact that the Mod. 91C carbines were employed by the intended users of the Beretta submachineguns during WW1, so it stands to reason to use the same system here for reasons of familiarity.

    • @jameslawrence2446
      @jameslawrence2446 Рік тому +1

      @@F1ghteR41 RE: the bayonets, the Italian 'moschetti automatici' were originally intended to have detachable Mod. 91 bayonets but were changed to have the cavalry style bayonet because they were assembled at the MIDA factory in Brescia, using many of the same components as the Carcano carbines made there.

    • @F1ghteR41
      @F1ghteR41 Рік тому +1

      @@jameslawrence2446 But the semi-auto Mod. 18/30 was made for the Carabinieri, who were issued with Mod. 91C from the very beginning.

    • @jameslawrence2446
      @jameslawrence2446 Рік тому +2

      ​@@F1ghteR41 It was actually originally designed for military use, however it failed to attract a substantial military contract. The primary users of the Mod. 1918/30 were paramilitary forces such as the Milizia Nazionale (Blackshirts) and Milizia Forestale (Forestry Police).
      Needless to say, the situation around the Beretta automatic carbines is very complicated and most sources are full of myths and misconceptions about them. I can't really explain it in full here but I could direct you to some better sources if you are interested.

  • @EddietheBastard
    @EddietheBastard Рік тому +4

    Might I suggest Standard, Bullpup and 'pistol type' (I know there are lugers and some other pistols with weird 'standard' layouts - but...) as a breakdown to clearly distinguish things like this and the UZIs which are so clearly more 'machine pistol' in their grip than standard SMG or Bullpup types?

  • @Ramonatho
    @Ramonatho Рік тому +5

    Those tabs on the stock are definitely for one handing. Love that the British always thought that was a good idea.

    • @spacewater7
      @spacewater7 Рік тому +6

      The tabs were for prone firing as well, perhaps primarily, especially with both extended.

    • @Ramonatho
      @Ramonatho Рік тому

      @@spacewater7 I imagine that being called "the snake" because you are holding "two fangs".

    • @blarpnarp
      @blarpnarp Рік тому +1

      i think americans tried this concept out in like the 50s or 60s, i believe the gun is called the hs10 and it was a shotgun intended for police to shoot from a moving car with one hand

    • @Ramonatho
      @Ramonatho Рік тому +1

      @@blarpnarp yep, the HS10 was meant to be usable with one hand for things like opening doors or operating other equipment like flashlights or tear gas.

  • @verfugbarkite
    @verfugbarkite Рік тому +1

    I remember spending an inordinate amount of time, pre you tube/internet, designing a useful smg for British army for WW2. Had something fairly similar to this designed. The advantage of magazine in the grip for intuitive loading appealed.
    Eventually I came up with a design like the beretta 1918, but using lee Enfield stocks. I thought the Tokarev round would give better range.
    Also accompanying this was WW2 tech body armour. Essentially a doron chest and back piece similar to modern rifle plates but only effective against shrapnel and pistol ammo.

  • @batwing-plays
    @batwing-plays Рік тому +12

    W.O.-M.G. clearly stands for:
    War Ordnance - Ministry of Guns
    03 stands for Oak Tree used for furniture among several other kinds of limber marked differently.

    • @FoodTrek
      @FoodTrek Рік тому +3

      "war office" is much more likely.

    • @batwing-plays
      @batwing-plays Рік тому

      @@FoodTrek fair enough

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +1

      You are not far off. We believe it's "War Office Master General of Ordnance [Dept] 3".

  • @j.robertsergertson4513
    @j.robertsergertson4513 Рік тому +1

    I love how the Brit's came up with a whacky idea and said ,why not give it a go ! No one can say they didn't think outside the box and try new things.

  • @scottfoster9452
    @scottfoster9452 Рік тому +1

    I absolutely love viewing these videos that present to me, new and unusual, rare prototype experimental small arms, well done and please keep up the good work.👍

  • @samwalker7567
    @samwalker7567 Рік тому +5

    Are you sure there shouldn't be some kind of cover (maybe bakelite that's cracked and been lost?) over the magazine to form a proper grip? In the closeup there's some kind of notch on the reinforcing plates on the side of the magazine housing that seems to serve no purpose, and there does appear to be quite a lot of open space around where the magazine goes through the trigger plate. There's not even a top lip forming a magazine well which seems really rather odd, and would surely lead to a lot of dirt ingress, even on a prototype.

  • @noodlesbad
    @noodlesbad Рік тому

    "Weird Object - Mystery Gun" of course!

  • @keithskelhorne3993
    @keithskelhorne3993 Рік тому +3

    WO = War Office, MGO = Master General of the Ordnance, 3 , possibly third directorate (?)
    and yes, I'm ex RAOC :) lol

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +1

      You are spot on, well, as far as we can tell :) "War Office Master General of Ordnance [Dept] 3". Why the hell a civvie designer is bothering to slap that on their guns, who knows. I've never seen anyone else do that.

  • @bscommissions892
    @bscommissions892 Рік тому +5

    This is me speculating mid video, but the stock kind of made me think could it be that it was intended to be a Paratrooper weapon or weapon to be used by people from an elevated position of some sort?
    as mentioned in the video it seems to be made to in some way keep the other hand free, which could mean maybe it was also cause the person using it would be holding onto something else while using it.

    • @samwalker7567
      @samwalker7567 Рік тому

      I was wondering if the intention was for someone like a motorcycle courier or sidecar passenger where the other hand would be needed to hang on or operate the vehicle.
      In fact, it's oddly symmetrical for a British weapon with that centralised cocking handle and the ejection port on the very top (both of which come from the parent Beretta) which makes me wonder if it was intended from the outset to be ambidextrous and enable offhand use with a single hand.
      I'm even wondering having watched the full video if it actually started life as its current configuration or whether it was originally an actual Beretta 18/30 or at least a near 1:1 copy. The extended metal plate on the lower side of the stock joining the metal "buttstock" looks awfully like it might be covering up a cut out in the wood where the trigger would originally have been located, and looking at the new trigger guard, it really does look like an afterthought that's been shaped to fit the existing space, it's incredibly short for a combat weapon.

    • @pommunist
      @pommunist Рік тому

      I thought it might be for stability when firing in the prone position, with the magazine in a pretty reasonable location for that purpose. Hence the ambitious sight range. It would be interesting to see if you can get your eye behind the sights any easier in that position.

  • @88porpoise
    @88porpoise Рік тому +6

    Isn't 9mm Glisenti loaded to the velocity of 9mm Parabellum literally just 9mm Parabellum?
    My understanding is that 9mm Glisenti is just a reduced power 9mm Parabellum.

    • @spacewater7
      @spacewater7 Рік тому +5

      Good point, and sources agree.
      en.m.wikipedia.org/wiki/9mm_Glisenti

    • @bengtjakobsson5177
      @bengtjakobsson5177 Рік тому +1

      I thought exactly the same. Also absolutely idiotic to make a cartridge in the exact same dimensions as another but stronger one that is to powerful.

    • @88porpoise
      @88porpoise Рік тому +1

      @@bengtjakobsson5177 It isn't that unusual. We even have the same today going the other way with commercially available +P+ loads that I wouldn't want to use with many early 9mm pistols.
      Also consider the time, in 1910 9mm Luger was still a pretty niche thing that (as far as I am aware) only the German Army and Navy had adopted. And it didn't become very big commercially until post-WWI. So it was unlikely there would be a real risk that 9mm Parabellum gets anywhere in the Italian supply chain. And they had the pistol they wanted it just wasn't resilient enough with full powered 9mm Parabellum, so why not just download it?

    • @spacewater7
      @spacewater7 Рік тому

      @@bengtjakobsson5177 I'd think the opposite is true. The original loading of 9x19 isn't powerful enough, many people argue these days. Which is why.38 Super was developed (9x18 semi-rimmed case) in the '70s. There's no point to that one though, because 9 Largo was already equivalent (9x22.7mm, 1910s) but that doesn't $ell anything new and 'innovative' so they made .38 Super anyway.

    • @88porpoise
      @88porpoise Рік тому

      @@spacewater7 .38 Super was developed in the 1920s as a high velocity alternative to .45 and .38 ACP by packing more powder into a .38 ACP case.
      In the 1970s +P variants were brought isn't substantially better than +P and +P+ 9x19.

  • @youngy1919
    @youngy1919 Рік тому

    Looking at the rack behind you and having your book at home, I'd kill to get a closer look at the EM's

  • @domhogan7842
    @domhogan7842 Рік тому +6

    WO for War Office, the name at the time for the MoD?

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +3

      W.O. is definitely an abbreviation for War Office but it makes little sense in this context.

    • @domhogan7842
      @domhogan7842 Рік тому

      @@jonathanferguson1211 and MG doesn't fit any British nomenclature or if it is machine gun, any known WO requirement of the time (if 1938 is the date of production). And that length of barrel... It's a SMG if the spec is to be 'every feature is not to conform to what advantages an SMG has'.

    • @samwalker7567
      @samwalker7567 Рік тому +3

      @@domhogan7842 What about if it referred to the War Office Department of the Master General of the Ordinance - just wondering if the 0 is actually an O as it's the same symbol as the one in WO, so it's WO MGO 3 not WO MG 03. So "War Office, (department of) Master General (of the) Ordinance". That could link it to an intended use within artillery, engineering, or transport, all of whom make sense as potential recipients of an odd, one handed, compact carbine (or possibly ultimately an SMG).

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +2

      And, I was wrong, it IS War Office! Well, almost certainly. For some reason it appears Soley were marking their prospective trials weapons "War Office Master General of Ordnance [Dept] 3".

    • @samwalker7567
      @samwalker7567 Рік тому

      @@jonathanferguson1211 wahey, I nailed it first try!

  • @filli2429
    @filli2429 Рік тому

    this man is so awsome❤❤❤ just love him

  • @PavewayJDAM
    @PavewayJDAM Рік тому +1

    War Office - Machine Gun RFP 03
    The pseudo hand position on the rear stock looks like it was intended to be used just like a rifle when bayonet training/fighting.

    • @harryspeakup8452
      @harryspeakup8452 Рік тому

      Would agree on the MG part if it were select fire, but it's semi only

  • @felixthecat265
    @felixthecat265 Рік тому +1

    Jonathan... very nice, but any chance of seeing an EMC2? I am sure you have at least one in there!

  • @bigjay875
    @bigjay875 Рік тому +1

    I think i would call it a proto bulpup, gives me some ideas, might be bad ideas but ideas none the less😊

  • @SendBreadPics
    @SendBreadPics Рік тому

    Never thought i'd discribe a gun as "uncanny valley".

  • @Pattern51lover
    @Pattern51lover Рік тому

    “Blimey! That’s one big Uzi!!”

  • @bofoenss8393
    @bofoenss8393 Рік тому +11

    And now I am starting my betting pool that this will get included in Sniper Elite 6 or DLC to SE5 at least. Wacky prototype, check. Weirdly plausible, check. "Exotic" looking, check. Yup, the guys at Rebellion must be wiping the floor from saliva right now.

  • @blue2sco
    @blue2sco Рік тому

    Leeds Armoury : How many EM's do you need?
    JF: ALL OF them!!

  • @Miata822
    @Miata822 Рік тому

    Perhaps the folding stock stirrups are to help steady the aim while making those critical 500 yard shots with a 9mm.
    /s, of course

  • @sim.frischh9781
    @sim.frischh9781 Рік тому

    With this gun, the Uzi and the Mac-10 as well as the numerous guns using the same style, we really need a name for them.
    For one, they deserve their owwn category, and we shoulld somehow differentiate them from the regular and the bullpup builds.
    I for my part think of them as the mag-grip build, as the magazine goes through the grip forcing a straight grip, which forces a rather uncomfortable looking hand position.

  • @caeserromero3013
    @caeserromero3013 Рік тому +1

    12:19 comes with a phillips head screw driver attached, for disassembly and maintenance 😂

  • @Oldtanktapper
    @Oldtanktapper Рік тому +2

    Maybe you could have a competition for the public to name some of those anonymous oddballs in your collection. I’m sure the results would be both entertaining and informative, what could possibly go wrong?

  • @TMFShooting
    @TMFShooting Рік тому

    Great Stuff Johnathan ''

  • @RHaenJarr
    @RHaenJarr Рік тому

    Sniper Elite devs: "WRITE THAT DOWN, WRITE THAT DOWN"

  • @George_M_
    @George_M_ Рік тому +3

    I look forward to seeing it in the next WW2 shooter.

  • @matthewspencer5086
    @matthewspencer5086 Рік тому +1

    Some definitions of "bull pup" would include the Spencer and Evans rifles from the American Civil War and the period following it. (Magazine runs back to the butt-plate).

    • @blarton6375
      @blarton6375 Рік тому +1

      Not quite as the actions for the Spencer and Evans are ahead of the trigger.

  • @grahamthebaronhesketh.
    @grahamthebaronhesketh. Рік тому

    Genius ambidextrous gun.

  • @StromBugSlayer
    @StromBugSlayer Рік тому +1

    WO MG: War Office - Machine Gun? Actually, I like "Ministry of Guns" as mentioned below.

  • @caeserromero3013
    @caeserromero3013 Рік тому +2

    It looks like a truck ran over an antique Schmidt Rubin, the driver felt bad about it, and tried to repair it with some stuff he found in a dustbin....there you go...good as new 🤣

  • @patrikhjorth3291
    @patrikhjorth3291 Рік тому +2

    I daresay whoever was responsible for this weapon learned a great deal from it, primarily about how _not_ to build a useful firearm.
    Thank you for sharing!

  • @edsutherland8266
    @edsutherland8266 Рік тому

    The Beretta is a real beauty, which makes the Soley being such an ugly duckling so funny. It’s a shame that the SMG was such an afterthought for the UK in the immediate pre-war period.

  • @Tounushi
    @Tounushi Рік тому

    Interesting that they decided to make a compact version of the Beretta only for it to have the same overall length. Did they simply want one with a longer barrel without making a longer gun?
    Would've been interesting to see a version that would've just been an Uzified Beretta.

  • @Tallus_ap_Mordren
    @Tallus_ap_Mordren Рік тому +1

    W. O. = War Office? That’s a thing in the UK, right?

  • @Sssaaatttuuurrrnnn
    @Sssaaatttuuurrrnnn Рік тому

    I adore the look of the wood. It's like you lopped off the front of a long infantry rifle and gave it a skeletal magazine grip. It's so bizarre.

  • @Matt-md5yt
    @Matt-md5yt Рік тому +1

    it's odd looking but neat piece of history

  • @siobhra4096
    @siobhra4096 Рік тому

    I suspect that the oddly shaped butstock (the pistol grip like part, not the shoulder supports) is for bayonet fighting, to both give a bit more reach, and a more conventional for the era hand positioning

  • @radziomenek
    @radziomenek Рік тому

    I'd SOOO see this gun in Gloomwood, jeez...

  • @Never_heart
    @Never_heart Рік тому

    With that curious buttstock, I can't help but wonder if this was conceptualized as either an officer's or a grenadier's firearm. That way they could fire while manipulating an explosive or giving 1 handed directions

  • @S.A.U.1489
    @S.A.U.1489 Рік тому

    Defining a bull pup, as having the magazine behind the grip would probably be a better working definition

  • @leneanderthalien
    @leneanderthalien Рік тому

    a bit similar to the 1918 french Ribeyrolles SMG (who was use in small number end WW1), but this british SMG is more exotic with he's semi bullpup design...

  • @agentwashingtub9167
    @agentwashingtub9167 Рік тому

    It has a part that goes up *and* a part that goes down?? Crazy

  • @grahamrankin4725
    @grahamrankin4725 Рік тому +1

    I am curious where the term "bull pup" came from. Any suggestions?

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +1

      I cover this in my book. It simply means a young bulldog. It fell out of usage in the 20th century but was still widely used and known in the 1930s-40s when it was coined in the US.

  • @caeserromero3013
    @caeserromero3013 Рік тому +2

    Robin Soley of R Soley and Sons 🤣

  • @joeyvanhaperen7715
    @joeyvanhaperen7715 Рік тому

    That almost looks like you would hold it with your right hand at the stock and your left hand on pistol grip using your left hand to pull the trigger.

  • @StuartPowell-vn8tg
    @StuartPowell-vn8tg Рік тому +2

    I recall seeing a Lewis gun modified by Soley with a Bren like magazine on top and the helical return spring replaced.

  • @timothyreeves1521
    @timothyreeves1521 Рік тому +2

    'W.O.' ... War Office ???? model 03

  • @Justice-ian
    @Justice-ian Рік тому

    I really appreciate and respect the way you presented your [non-]bullpup assessment: state a reasonable argument and its supporting logic, without being dogmatic or dismissing other perspectives.
    The Soley is a missed opportunity IMO. I've often thought someone should have adopted a (fixed-stock) Uzi-sized SMG in the pre-telescoping bolt era by simply putting a grip and trigger on e.g. a STEN magwell, and a buttplate on the endcap. It's cool to see real-world examples, but such a shame that they bulked it up with an absurdly long barrel, pointless "that's the way we've always done it!" stock wood behind the grip, etc. Shame as well that the reluctance to use elevated sights led them to use that spindly "stock" when a simple leather / bakelite pad (or even the bare receiver tube) could have provided a real cheek weld.

  • @julianmhall
    @julianmhall Рік тому +1

    I wonder if W O M G 3 was a design contract / specification (like F.5/34 was the design specification the RAF issued for what became the Hurricane and Spitfire). The National Archives mark War Office documents with a WO prefix, so it could be War Office Machine Gun [specification number] 3? That may explain why there aren't many and it isn't stamped with an official 'name'.

  • @Hamun002
    @Hamun002 Рік тому

    its like you gave someone from the time period a mac-11 or something an asked them to make something like it

  • @antoninolatorre8355
    @antoninolatorre8355 Рік тому +1

    hi, Jonathan !!!
    this bullpup is an improved of beretta mod. 18 called "siringone", the magazine of beretta 18 is the same than this bullpup, the beretta 18 was a semiauto carbine improved from smg "Villar Perosa" ...
    bye bye
    👍👋

  • @iamsadlmao4415
    @iamsadlmao4415 Рік тому

    Love stuff like this

  • @peternicol3439
    @peternicol3439 Рік тому

    Bit of a flex on the EM series of rifles

  • @julianconstantine6681
    @julianconstantine6681 Рік тому

    Obviously War Office. Presumably this is a prototype or proffer for procurement which entered a trial.

  • @JustProto00
    @JustProto00 Рік тому

    How many people can come out and say "I've created my own firearm definition" and have people take it seriously?

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому

      Well to be fair it was for the purposes of the book, but it does work, I think.

  • @latewizard301
    @latewizard301 Рік тому

    it looks like something i would make in Blender while i was drunk XD

  • @damion9742
    @damion9742 Рік тому

    If thats the Model 2, I'm really curious what the Model 1 was.

  • @philipfreeman72
    @philipfreeman72 Рік тому

    On my rifles I took off the butt pad & put a loop of stiff webbing . Have you ever seen that done ? It keeps the rifle shouldered .

  • @tomr2982
    @tomr2982 Рік тому +2

    I'm curious to know if the magazine is interchangeable or just similar. Johnathan didn't try stuffing it in the Beretta

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +1

      I did, gingerly and off-camera :) It does fit, but it's tight...

    • @tomr2982
      @tomr2982 Рік тому

      @@jonathanferguson1211 tight fit it both then. Inconclusive :)

  • @pbr-streetgang
    @pbr-streetgang Рік тому

    Way cool👍🏼👍🏼

  • @caeserromero3013
    @caeserromero3013 Рік тому +1

    WO-MG could be War Office Machine Gun?

  • @ZGryphon
    @ZGryphon 2 місяці тому

    The "War Office" guesses are intuitive, but I think it's likely this was originally made for the little-known postwar counterespionage agency W.O.O.C.(P).

  • @ipanzerschrecku4732
    @ipanzerschrecku4732 Рік тому

    they're actually the same length overall

  • @ethelmini
    @ethelmini Рік тому

    A million rounds of 9mm were captured off the Italians in the Middle East. This was likely an attempt to produce something to use it with minimal development. The Sten must have been a better one.

  • @AsbestosMuffins
    @AsbestosMuffins Рік тому

    is that like a significant percentage of the world's supply of EM-2's behind him?

  • @backupintheday9710
    @backupintheday9710 Рік тому

    Other than the stock it doesn't actually look too bad.. That stock is ridiculous though.

  • @jojomarujo8704
    @jojomarujo8704 Рік тому

    uhh, so it got a longer barrel not for the ballistics but because they want to fit a bayonet on it?

  • @bradleyjames1340
    @bradleyjames1340 Рік тому

    The folding "tabs" seem like they would create a nice springy shouldering surface to eat up recoil in their inward position, but that would hardly seem necessary on a 9mm and it doesn't explain the hinged aspect. Could it have been intended for a separate block to be wedged in to serve as a more traditional butt stock when compactness wasn't critical? I can picture it but hard to say if the length of pull would be too great for comfortable accurate shooting.

  • @ketchman8299
    @ketchman8299 Рік тому +1

    Very oddly, wierdly interesting. With proper development it had some promise.

  • @phohecks6046
    @phohecks6046 Рік тому

    Wouldn't those tabs on the stock be used for hip firing the gun? something like the hook on the spas 12.

  • @OutOfPrintGM
    @OutOfPrintGM Рік тому

    Well at a guess the WO stands for War Office and mg-03 probably machine gun number 3 but that is just a guess

    • @jonathanferguson1211
      @jonathanferguson1211 Рік тому +1

      I discounted War Office initially but I am now convinced it is - so it's "War Office Master General of Ordnance [Dept] 3".

  • @DayoftheJakeL
    @DayoftheJakeL Рік тому

    Walter Owen SMG. A cousin of WO Bentley

  • @Doppeldropper
    @Doppeldropper Рік тому +1

    I've heard of pre ww2 SMG trials held in UK that were supposed to have been prequisite for possible SMG adaptation for the British military. I've heard a story that the Suomi m/31 got the best points in the trials against other available options for license build SMG, but the start of the ww2 prevented any new sales from Finland, and other priorities game alo g with UK weapons needs.
    Do you happen to have any information of such a SMG trials held in UK at late part of 30's (1938-40?)?

    • @jameslawrence2446
      @jameslawrence2446 Рік тому +4

      There were never formal competitive trials held prior to WW2 but many designs were tested by the Ordnance Board.
      In 1939, the BSA-Király, a British-made Hungarian design, was submitted and seemed to be a very good proposition in both quality and cost, but was rejected without much elaboration. Later they tested a Suomi KP/31 with a quadruple-column casket magazine and considered applying the same idea to the Bren gun, but nothing came of it.
      Almost immediately after the war broke out, the BEF made an immediate request to the OB for a supply of SMGs for informal field trials. The Thompson, Steyr-Solothurn, Suomi, and Hyde were all sent. The Suomi was preferred but only the Thompson could be acquired at short notice, even though it was the most expensive option by some considerable margin (£50 per gun). In February 1940 the OB ordered 450 M1928AC Thompson guns which were issued to the BEF and used in action prior to the Fall of France.

    • @Doppeldropper
      @Doppeldropper Рік тому

      @James Lawrence thank you for the answer, that's the information I was looking after 🫡

  • @Fedaykin24
    @Fedaykin24 Рік тому

    By the power of Grey skull! a rack of EM-2 and XL-60!
    Are you intentionally winding up Ian McColm Jonathan!

  • @tomgoff7887
    @tomgoff7887 Рік тому +1

    WO MGO3 = War Office Master General of the Ordnance Secretariat 3?

  • @DarkDancer99
    @DarkDancer99 Рік тому

    Can you do a video on STALKER game Guns?

  • @briankelly8297
    @briankelly8297 Рік тому

    Forgotten weapons are gonna be pissed.

  • @FelixstoweFoamForge
    @FelixstoweFoamForge Рік тому +1

    Well, sort out all the issues, (polish the design, put a decent stock on it, fix the magazine catch and fit etc etc), and it'll be better than the sten, if a bit more costly. Oh, and lose the bayonet.