I tired of loading my mags without a loader...so i decided to buy one of these, i got mine home and i was staring at and going "WTH"....then i watched your video and i'm loading quicker than ever before. Thanks for the How To vid.
As a newbie into gun world at 66 years old I still have problems loading mags by hand. I believe its all about technique not strength so the Uplula is my go to. But I want to master it. Just like shooting my SW 9mm Compact for the first time today at 10 yards I hit the 10×14 target, but not one good grouping. Practice makes perfect I hope.
That little key ring is for holding the single stack mags clip on adapter. It’s a little U shaped clip that clips onto the bottom so you can use it easier for .45 SCP mags. It centers the single stack mags.
THANK you for going step-by-step, at a slow pace, so novices can actually follow what you're doing. I tried to watch other videos but they failed to describe steps they assumed the viewer was already familiar with. But your video enabled me to actually use the loader correctly. Great job!
Awesome Video... NOTE: The instructions recommend on-loading the first round into the magazine by hand, then loading the remaining rounds with the UPLULA to avoid scratching the follower with the metal beak/ramp on the Uplula. Another feature is the magazine off-loading tool designed onto the side where the ring is on the speedloader...
Thank you sooooo much for the step-by-step, slow tutorial! I was lost until I watched this and loaded my magazine at the same time as you loaded yours.
Thank you so much. Your video for this UpLULA mag loader is the best. I've just bought it and there is no need to read their instructions on the package. U R right! It's very simple to use because of your video.
That would be great for granny's like me I go to the range I have a hard time loading my Glock magazine. My Ruger Max is just fine. I would love to get one of that Maglula mag loader. Thanks kiddo. Love your videos.
Thank you so much for this demonstration of this 9 mm loader because the instructions weren’t very clear in my book but thank you again it’s been a great help now I can do it easily.
I just purchased one today not knowing anything about them and the gun store recommended that particular one for 9 mm he demonstrated for me but when I got home I had no instructions he gave me one that he had in the store he didn't have the rapper anyway when I got home I forgot what he said and what he demonstrated so I had a hell of a time trying to figure it out and could not so then I Googled it it came up with this and now I understand 100% great demonstration and now I can sleep tonight.
I just started using these, they really are great. I found that sometimes the little notch that pushes the rounds down will pull the top one forward a bit when you release it. Keeping a finger on the top round keeps it in place and doesn't really slow anything down. Also, there's a printed icon of a bullet cartridge on the top, indicating which direction it should be facing when you're loading.
Finally found a review of how the Maglula works!!! All the other reviews were so difficult to understand, perhaps because the reviewers watched were guilty of assuming all the folks who viewed the videos prior knowledge.
I have two of the older loaders and you always had to keep the mag straight. The new unit has a mag "guide" that centers the magazine. No more need to hold the loader in the center. GREAT !
BY far the best video on how to use the uploader, I watched other video's and they went way too fast for me. Maybe I'am just slow, but after watching this video I got it. Thanks
I just got mine today and I love it, my 9mm magazine is a son of a GUN to load. With this thing, it is a breeze to load. I have looked at other loaders and in most of them you have to load the first bullet yourself but this one will load first to last.
I have a .380 and a 9mm. I knew this would work with the 9 but wasn't certain whether it would work with the .380. Had no issues. One thing you missed is on the back side is an unloader which works really well.
After many years of not using a mag loader, I have finally met my match with the P365 magazine. Great video, and think I’m gonna pick this one up. And why can’t handgun magazines be like AR/AK style where you just push a bullet straight down - lol
Excellent video, thank you! The instructions that came with the UpLULA speed loader SUCK ROCKS! You video cleared it up perfectly. IMO, the Glock speed loader sux. The UpLULA is great! Hand loading 9mm or less is easy, and I'm 62 yrs old. 10mm is alot more challenging, especially loading the last 3 rounds or so. I use the UpLULA to load my 10mm rounds and it works great1 Very easy to use
Some of the local gun ranges now include one of these in each bay. Of course they are attached to the wall via a cable/chain so people don't walk off with them. Been using one for quite a few years.
I could not load more than a few rounds in the 30 round magazines for the Keltec 22WMR rifle. I can now load 30 rounds in the magazines with an Magula loader. I bought two of them in case I loose or break one.
Hello Is it compatible with the blank bullets from the KIMAR 75 alarm pistol (I can't insert more than 3 or 4 bullets into the magazine because it's so difficult)?
Appreciate the video cause the directions suck. I’m all about loading ammo myself but these are a must at the range or for people who have arthritic hands. Thanks again!
Good job- constructive critique you don’t need to mention Glock mag video twice. If they can’t read or understand the first time that is on them. I found myself thinking ok now I am going to see how it is done and boom right into another glock video blurb. Disrupts flow and penalizes those of us who got it and want to see it work. Other than that good job- subscribing and yep that is what the ring is for- lanyard
My method: Using the left hand, wrap the index finger over the hoop on top, three remaining fingers around the back, thumb around the front. Squeeze with the thumb, then push down with the index finger. Drop in the round. Release. Repeat. Works well with 17-round mags.
I am having trouble finding this item on Amazon or another website. Do you have a link for this " 9mm Maglula UpLULA Universal Pistol Magazine Speed Loader?" Thanks in advance
I purchased a new 9MM Equilizer and they come with the UpLULA speed loader in the box. I couldn't read the instructions, to small, went to their website, the video was TERRIBLE. Went to your site and TADA. Now I am a speed loader. THANK YOU SO MUCH!!! BTW, please extend the recording showing how you can quickly unload the magazine. This is another great simple feature.
Great video. I noticed you didn't use the small protruding "tooth" on the other side of your Updula when unloading a few rounds from your double stack mag (around 5:35).
I fail to see the advantage over the standard Glock speed loader that comes with the gun. Is fractionally faster worth buying another gadget to carry around? Sorry, not interested.
I'll never use this again. There's too much play in it. It snapdown on top of the magazine that would make it much easier to feed. The rifle speedloaders are design that way they lock onto the magazine this one here was more problematic than it was anything else and why do you have a lock lever on it makes no sense
I tired of loading my mags without a loader...so i decided to buy one of these, i got mine home and i was staring at and going "WTH"....then i watched your video and i'm loading quicker than ever before. Thanks for the How To vid.
Thanks for watching!
@@DuncanMeter0:36
As a newbie into gun world at 66 years old I still have problems loading mags by hand. I believe its all about technique not strength so the Uplula is my go to. But I want to master it. Just like shooting my SW 9mm Compact for the first time today at 10 yards I hit the 10×14 target, but not one good grouping. Practice makes perfect I hope.
Hi there, where I can buy this? Thanks and appreciate it 😊
@@vbucaneg Most guns stores carry them. Also, any of the online retailers but Amazon only has the knock-offs.
There is no doubt that, this the best video for using the Uplula I have ever seen and how to use.
Thanks for watching!
That little key ring is for holding the single stack mags clip on adapter. It’s a little U shaped clip that clips onto the bottom so you can use it easier for .45 SCP mags. It centers the single stack mags.
THANK you for going step-by-step, at a slow pace, so novices can actually follow what you're doing. I tried to watch other videos but they failed to describe steps they assumed the viewer was already familiar with. But your video enabled me to actually use the loader correctly. Great job!
Thanks for watching!
Awesome Video... NOTE: The instructions recommend on-loading the first round into the magazine by hand, then loading the remaining rounds with the UPLULA to avoid scratching the follower with the metal beak/ramp on the Uplula. Another feature is the magazine off-loading tool designed onto the side where the ring is on the speedloader...
Thanks for watching!
I appreciate your video how calmly you explained the process. Now, I will be better at the range. Thank you so much!
Thanks for watching! Check out some of my other videos which you may find helpful.
Great video! Thank you. These little speed loaders are awesome!
Thank you sooooo much for the step-by-step, slow tutorial! I was lost until I watched this and loaded my magazine at the same time as you loaded yours.
Thank you so much. Your video for this UpLULA mag loader is the best.
I've just bought it and there is no need to read their instructions on the package.
U R right! It's very simple to use because of your video.
Thanks for watching and glad it was helpful! Check out some of my other videos, which you might find useful as well.
You were the best at describing the speed loader. Other channels were awful!
Thanks for watching!
I'm a newbie and this came with my new Equalizer - love it! Thank you for the video.
Glad it was helpful!
That would be great for granny's like me I go to the range I have a hard time loading my Glock magazine. My Ruger Max is just fine. I would love to get one of that Maglula mag loader. Thanks kiddo. Love your videos.
Thanks DM. Love Maglula Speedloaders!! 🙂
Omg thank you. Your video was straight to the point
Thanks for watching!
Thanks for this, I have difficulty following written directions and diagrams so your video is perfect for people like me, if there are any.
Thank you so much for this demonstration of this 9 mm loader because the instructions weren’t very clear in my book but thank you again it’s been a great help now I can do it easily.
You are very welcome
I just purchased one today not knowing anything about them and the gun store recommended that particular one for 9 mm he demonstrated for me but when I got home I had no instructions he gave me one that he had in the store he didn't have the rapper anyway when I got home I forgot what he said and what he demonstrated so I had a hell of a time trying to figure it out and could not so then I Googled it it came up with this and now I understand 100% great demonstration and now I can sleep tonight.
Thanks for watching!
I had bought one of these devices a few years ago for my Smith and Wesson M&P 9. Loved it. When i bought my Equalizer, it came with one in the box.
Thanks for watching!
I recently purchased the Equalizer - love this little tool!
Thank you. I just got one and was confused with the directions but you cleared it all up.
I just started using these, they really are great. I found that sometimes the little notch that pushes the rounds down will pull the top one forward a bit when you release it. Keeping a finger on the top round keeps it in place and doesn't really slow anything down. Also, there's a printed icon of a bullet cartridge on the top, indicating which direction it should be facing when you're loading.
Butter smooth after you work through the resistance (new magazine). Great job on this tutorial! Thank you.
Thanks for watching!
Finally found a review of how the Maglula works!!!
All the other reviews were so difficult to understand, perhaps because the reviewers watched were guilty of assuming all the folks who viewed the videos prior knowledge.
Thanks for watching and thank you very much for the support! Very appreciated!
Thanks for a GREAT explanation/“How to” Video!!
Glad it was helpful!
Helpful for me. Worth what u pay for! Thanks for sharing..
Glad it was helpful!
Thank you very much, this lil gadget is awesome.
I have two of the older loaders and you always had to keep the mag straight. The new unit has a mag "guide" that centers the magazine. No more need to hold the loader in the center. GREAT !
Thanks for watching!
BY far the best video on how to use the uploader, I watched other video's and they went way too fast for me. Maybe I'am just slow, but after watching this video I got it. Thanks
You're welcome!
I just got mine today and I love it, my 9mm magazine is a son of a GUN to load. With this thing, it is a breeze to load. I have looked at other loaders and in most of them you have to load the first bullet yourself but this one will load first to last.
I have a .380 and a 9mm. I knew this would work with the 9 but wasn't certain whether it would work with the .380. Had no issues. One thing you missed is on the back side is an unloader which works really well.
Very helpful. Ordered one yesterday.
Glad it helped and thanks for watching! Check out the other videos on my channel that may be helpful to you!
After many years of not using a mag loader, I have finally met my match with the P365 magazine. Great video, and think I’m gonna pick this one up.
And why can’t handgun magazines be like AR/AK style where you just push a bullet straight down - lol
Good demonstration. Thank you
Glad it was helpful!
Really enjoyed how you explained the Uplulu. Following you now.
Awesome, thank you!
Thanks for reminding me how to use this thing.
Thank you for the demo. Easy to use.
Thanks for watching! Check out some of my other videos which you may find helpful.
@@DuncanMeter will do
Excellent video, thank you! The instructions that came with the UpLULA speed loader SUCK ROCKS! You video cleared it up perfectly. IMO, the Glock speed loader sux. The UpLULA is great! Hand loading 9mm or less is easy, and I'm 62 yrs old. 10mm is alot more challenging, especially loading the last 3 rounds or so. I use the UpLULA to load my 10mm rounds and it works great1 Very easy to use
Just got a sig, 365. The springs are so tight, cut thumb on 4th round. Got this loader 👍👍😂
Brilliant, thumb happy.
Thanks for watching!
Same thing with my 365xl 🤣 just picked this loader up today!
Some of the local gun ranges now include one of these in each bay. Of course they are attached to the wall via a cable/chain so people don't walk off with them. Been using one for quite a few years.
Thanks for watching! Check out my other videos which you might find helpful!
excellent video; got it on the first try
I have it for my 9x19. Wonderful 🤙🤙
Thanks for the video I just got my first gun and bought this with it and had trouble figuring it out I've gotta use it on my 9 and my dad's 40
Thanks for watching!
just loaded my first 18 round magazine with my new UpLula....No Pain No Strain !!!!
Thanks for watching!
Gm…. Great video,Much faster then a Glock loader….. Appreciate it!
Thanks 👍
OMG I have got to get this! New owner here and it has been hell trying to load.
Thanks for watching and glad it was helpful! Check out my other videos that may be helpful as well!
Thank you for this video‼️
Thanks for watching! Check out some of my other videos which you may find helpful.
Thank you, it works great.
Thanks for watching and glad it was helpful! Check out some of my other videos, which you might find useful as well.
These are excellent.
Thanks for watching!
Best addition to my new springfield xd
Thanks for watching!
I could not load more than a few rounds in the 30 round magazines for the Keltec 22WMR rifle. I can now load 30 rounds in the magazines with an Magula loader. I bought two of them in case I loose or break one.
Works great love it
Thanks for watching!
Wow, the UpLula universal speed loader is awesome. It works on Glock 19 9mm and on my Sig Sauer P365-380 .380 magazines !
There is an unloader on that uplula it is on the side, by the split ring.
Thanks for the vid.
Thanks for watching!
I love mine, no more having to keep so many different loaders in my bag
Thanks for watching!
Hello
Is it compatible with the blank bullets from the KIMAR 75 alarm pistol (I can't insert more than 3 or 4 bullets into the magazine because it's so difficult)?
Appreciate the video cause the directions suck. I’m all about loading ammo myself but these are a must at the range or for people who have arthritic hands. Thanks again!
Thank you for this video
Thanks for watching!
Good job- constructive critique you don’t need to mention Glock mag video twice. If they can’t read or understand the first time that is on them. I found myself thinking ok now I am going to see how it is done and boom right into another glock video blurb. Disrupts flow and penalizes those of us who got it and want to see it work. Other than that good job- subscribing and yep that is what the ring is for- lanyard
Thanks for watching!
Works on my carry gun 380 magazine
Thanks for watching!
Israel makes some great stuff🔥
Thanks for watching!
My method: Using the left hand, wrap the index finger over the hoop on top, three remaining fingers around the back, thumb around the front. Squeeze with the thumb, then push down with the index finger. Drop in the round. Release. Repeat. Works well with 17-round mags.
Thanks for watching! Check out my other videos which you might find helpful!
There is also a speed unloader on the back of the device, if one chooses not to risk pinching or cutting a thumb!
Thanks for watching! Check out my other videos on the channel that you might find helpful!
@@DuncanMeter😮
@@patrickschulze5130i3
The back edge of loader has a way that aids in striping round from a full magazine
Thanks for watching!
Worked up a sweat but 3 clips done
I am having trouble finding this item on Amazon or another website. Do you have a link for this " 9mm Maglula UpLULA Universal Pistol Magazine Speed Loader?" Thanks in advance
Love mine!!
Thanks for watching!
Perfect...Thanx friend ..
Thanks for watching! Check out my other videos that you may find helpful.
T. U. It is easy and a pleasure to use.
Thanks for watching!
Thanks!
No problem!
Does this also work on a 9mm double stack magazine (GLOCK 17) ??
Yes Bob,
Yes sir!
Thank you.
You're welcome!
Thank you very much this makes sense over the glock ones
Thanks for watching!
Got one of these because of a friend’s recommendation and love it. Made in 🇮🇱 💪🏻
Thanks for watching!
It would be nice if you include a link to purchase one. Thanks for the video tho!
Thx for watching
Have you used this with single stack 380?
Thanks for watching! I have not tried
Thanks
I purchased a new 9MM Equilizer and they come with the UpLULA speed loader in the box. I couldn't read the instructions, to small, went to their website, the video was TERRIBLE. Went to your site and TADA. Now I am a speed loader. THANK YOU SO MUCH!!! BTW, please extend the recording showing how you can quickly unload the magazine. This is another great simple feature.
Thank you for the support and for watching!!
Great video. I noticed you didn't use the small protruding "tooth" on the other side of your Updula when unloading a few rounds from your double stack mag (around 5:35).
Thanks for watching! Check out my other videos that you may find helpful.
cool.
Those are a must have
With the help of this video itvwent from up your cula to uplula
Thanks for watching!
Is there a model number with this ?
No serial number that I’m aware of
Will that loader work for a 380?
Yes. The 380 is a bit shorter than the 9mm, but is the same diameter. This works fine for 380.
The little plastic hook protruding from the rear is for unloading magazines, works great also.
Great tip!
You Live in CALIFORNIA! 😂
😭thanks for watching!
Show the unload procedure
Is this made of plastic or steel thnx
Plastic. Thanks for watching!
@@DuncanMeter i bought it thnx
Ill stick to my speed loader
Thanks for watching!
When you realize we fought the wrong side in the war.
Thanks for watching! Check out some of my other videos which you may find helpful.
Are these only gor Glock? Asking for an M&P friend. 😊
Thanks for watching! Will work with m&p also
Why don't you place the rounds to the right so that you don't have to reach over your left hand?🤦🏻
I fail to see the advantage over the standard Glock speed loader that comes with the gun. Is fractionally faster worth buying another gadget to carry around? Sorry, not interested.
too much talk
Speed beez lever laoder is better
You're supposed to load the first cartridge by hand otherwise you'll mar up your follower.the instructions are right on the manual
I'll never use this again. There's too much play in it. It snapdown on top of the magazine that would make it much easier to feed. The rifle speedloaders are design that way they lock onto the magazine this one here was more problematic than it was anything else and why do you have a lock lever on it makes no sense
Thanks
Welcome